Harrington Hoists, Inc.    Manheim, PA 17545 1754
Nov 03, 2011 Featuring lifetime-lubricated gear box and adjustment-free electromagnetic brake, RHN Series includes 2 dual-speed configurations: 2-20 metric ton Deck/Base Mounted hoist, and 2-15 metric ton Ultra-Low Headroom trolley hoist. Maintenance is facilitated by rope without special fittings, cast iron rope guide, and accessible controls. Additional features include heavy-duty, fan-cooled motor; adjustable geared limit switch; load limiter; and motor management device with count hour meter.

Anver Corp. - Anver.Com    Hudson, MA 01749
Nov 01, 2011 Allowing one person to safely handle small parts weighing up to 250 lb, hoist-based VM-Series Assembly Lifter features custom pick-up suction pad for lifting compact metallic loads. It also features manual tilt mechanism for pick-and-place applications as well as compressed air and venturi principle for securely holding loads. Electric chain hoist provides up/down movement to maintain position without drift when stopped, and device is equipped with vacuum leakage sensor.

Mobile Industries, Inc.    Mississauga, ON L5C1W2
Nov 01, 2011 Along with 3,300 lb capacity for moving pallets and skids, ESET33 features electric battery-powered drive system for forward/reverse operation. Charging is accomplished overnight via 110 V outlet, and onboard 24 V battery pack can operate for 8+ hr. Able to achieve speeds to 2.8 mph fully loaded and 3 mph unloaded, truck is available with 48 in. fork length with 20.5 and 27 in. fork width options. Manual pump, operated via ergonomic handle, raises load to full height with 5 cycles.

Master Magnetics, Inc    Castle Rock, CO 80104
Nov 01, 2011 Featuring neodymium magnet and 23 in. long shaft that snakes through difficult or confined areas, Retractable Retrieving Magnet Tool is suitable for extracting metal parts from cramped engine compartments, behind heavy equipment, down drains, and in heating vents. Thermoplastic handle and round knob enable user to activate magnet when tool is in position for retrieval, while shielded sides prevent tool from attaching to metal surroundings until activated.

UNIST, Inc.    Grand Rapids, MI 49512
Nov 01, 2011 Coolubricator(TM) MQL (Minimum Quantity Lubrication) systems are available with Pulse Generator Adjustment upgrade, which features anodized aluminum knob with knurled grip and clearly marked pulse rate settings. Molded nylon base incorporates reference mark and is designed for retrofit of existing pulse generators. Upgrade facilitates adjustment of positive displacement pump cycle rate and enables settings on Coolubricator(TM) to be changed without screwdriver.

ID Technology Corp.    Fort Worth, TX 76106
Oct 31, 2011 Available with standard blow-on module, Model ST1000 uses fan to create low-pressure, high-volume vacuum that holds label in place, on grid, until application. High-pressure jet of air, through controlled pattern of tubes, then blows label onto product. Tubes can be arranged in variety of patterns to accommodate label shapes from .5 x .5 up to 4.5 x 4.5 in. Positioned from top or side, applicator can be placed in direction of product travel, reversed to product travel, or 90° to product travel.

Thermo Fisher Scientific    Waltham, MA 02454
Oct 31, 2011 Intended for use by laboratories, Dense Storage system combines 1 mL Thermo Scientific Nunc CryoBank tubes with 13 x 13 tube dividers, and Nunc(TM) CryoBoxes. Standalone tube separators can also be retrofitted to existing CryoBoxes for additional flexibility, and optional 2D barcodes on Nunc CryoBank tubes enable tracking and traceability. To facilitate manual handling, CryoBank Picker Pen has been designed to fit into top of each tube to uncap or move it between racks.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Oct 31, 2011 Featuring 36 x 60 x 36 in. chamber, customized Model 7 allows one user to change positions to reach all aspects of 5 ft long component or 2 people to blast simultaneously. Each work station has view window and independently adjustable blast nozzle, and top-hinged upper section accommodates loading of taller components. In addition to safety interlocks on all doors, features include stainless steel shot collection, cyclone media reclaimer, and dust collector.

Ekahau, West Coast    Saratoga, CA 95070
Oct 31, 2011 Suited for healthcare deployments, manufacturing plants, and retail environments, Model A4 detects Wi-Fi network signals and signals emitted by IR location beacons. Beacons can be placed in areas where micro-zone accuracy is required or where Wi-Fi coverage is not adequate. Offering 5 year battery life, tag includes optical tamper sensor that sends alerts if tag has been removed. Two configurable buttons can be used to send alarms or notify users of events, such as asset availability.

Essemtec Ag      Switzerland
Oct 31, 2011 Integrating active tape pull-back system and cutter, intelligent 12 mm Cobra Feeder facilitates and accelerates setup of component reels to SMD pick-and-place machines. One 12 mm tape feed takes less than 60 msec, and pickup position is reproducible within few micrometers. Due to feeder precision, pick-and-place head can pick up 4 components simultaneously from 4 different feeders. Feeders further simplify SMD reel setup by automatically threading tape and cover tape.

J D Neuhaus L.P    Sparks, MD 21152
Oct 27, 2011 Operating from 6 bar air pressure, Model EH 125 is equipped with 10 kW and 2.8 kW rated motors for lifting and traverse functions, respectively. In standard format, hoist is supplied with 6 double-chain mechanism providing 3 m lift at speeds of 0.30 m/min with full load, and 0.38 m/min on lowering. System offers horizontal travel speeds of 6 m/min with max load and 8 m/min when unloaded. Operating from -20 to +70°C, hoist has Ex rating for use in hazardous areas.

Modern Linear, Inc.    Corte Madera, CA 94976
Oct 27, 2011 Track Clamp provides defined track spacing to assure track parallelism. Set screws lock track in place, eliminating need for mounting holes, and design acts as stand-off to prevent build up as well as facilitate cleaning in contaminated or wash-down environments.

K-Tool International    Wixom, MI 48393
Oct 27, 2011 Along with Quick Lift technology, KTI low-profile service jack features heavy-duty steel frame, rear swivel casters, and 2-piece, 49 in. handle with rubber grips. Product has 4 ton capacity and 3 15/16 to 20 in. lifting range. Along with 6,500 lb capacity, KTI hand pallet jack has 27 in. fork width for load stability. Other features include 48 in. forks with lowered height of 3 in. and max lifting height of 7 ½ in., welded steel construction with powder-coated finish, and 210° turning radius.

Fibro Inc.    Rockford, IL 61125
Oct 26, 2011 Intended for car body assembly applications, modular and maintenance-free FIBROMAT is lubricated for life, driven by spur gear toothing, and can be equipped with pneumatic indexing upon request. Basic version is equipped with asynchronous servo gear motor with preconfigured drive converter, but modular concept also allows users to select motor(s) to meet application needs. Three sizes are available with 1,000, 1,250, and 1,600 mm dia table top.

Thermo Fisher Scientific, Air Quality Instruments    Franklin, MA 02038
Oct 26, 2011 Ultra-low temperature (ULT) freezers of Revco UxF Series feature intuitive on-board computer, which incorporates icon-driven touchscreen control panel that provides access to monitoring and control information. Visual display provides users with at-a-glance understanding of health for entire freezer. Event log with automatic, real-time alerting, health monitoring system, and controlled access options provide constant updates on integrity and health of stored samples.

Hamilton Caster & Mfg. Co., The    Hamilton, OH 45011 4087
Oct 26, 2011 With individual ratings up to 40,000 lb, Ultra Maxi-Duty (UMD) Caster Series helps simplify load-bearing designs by lowering number of required casters. Mounting plate is 14 x 14 x 1 in., and main load bearing assembly has 2 precision thrust bearings for smooth swiveling. Offered in both single wheel and dual-wheel versions, casters are further available with Poly Press-On, forged steel, and Nylast (high capacity cast nylon) wheel types.

RCI Technologies    San Dimas, CA 91773
Oct 25, 2011 Housed in NEMA 4 key-lockable cabinet, Model FRS 660-50-UL automatically circulates and cleans stored fuel at 50 gpm on preprogrammed schedule. System is equipped with alarms that alert user of pump failure, purifier high water level, and system high pressure. UL 508A-listed and Green Clean Institute-certified, system removes up to 99.9% of water, including emulsified water, and up to 98% of all normal solid or particulate contaminants found in diesel fuel.

Schneider Packaging Equipment Co., Inc.    Brewerton, NY 13029 0890
Oct 24, 2011 As plug-in robotic solution, Add-a-Pal turns new or existing Schneider case packer into case packer/palletizer. Case packer PLC is used to operate palletizer, and FANUC robot is capable of up to 30 picks/min. Able to accommodate single or multiple products, system offers custom End-Of-Arm Tooling (EOAT) options that include vacuum, mechanical, fork, or any combination thereof. Pallet handling options include manual to fully automatic pallet exchange with pallet dispenser.

Fluid Air, Inc.    Aurora, IL 60502
Oct 24, 2011 Available for GRANUMILL® Jr. size reduction system as well as other research and development applications, Flexible Enclosure is suitable for both containment and non-containment operations. Enclosure meets Occupational Exposure Banding 5 classification for containment of high-potency compounds, which translates to achievable containment level of 1.0 µg/m³ on task basis, ensuring safe operation when working with potentially hazardous materials.

New Pig Corporation    Tipton, PA 16684 0304
Oct 21, 2011 UN-rated for solid hazardous materials shipments, PIG(TM) Drum Containment Bag provides secondary containment and way to hoist containers on and off truck for field-to-shop mobility. Puncture-resistant, PVC-coated shell clips shut to keep rainwater out, while abrasion-resistant bottom enables bag to be dragged across gravel and other rough surfaces. Removable poly liner contains leaks and drips inside of bag and can be cleaned and re-used.