Robert Bosch GmbH    Waiblingen D-71332  Germany
May 13, 2009 Designed for automated processing of up to 9,500 syringes/hr, FXS 2050 filling and closing machine minimizes need for manual interference, so risk of contamination is minimized. It incorporates peristaltic pumps, automated bag and tub opening system, program-controlled servo drives, as well as RIL-100 rod insertion labeling unit, USD-100 denester, and ZPS buffer system. Single syringe samples can be accessed and discharged directly. System enables production under cleanroom class A conditions.

Robert Bosch GmbH    Waiblingen D-71332  Germany
May 13, 2009 Able to fill 175,000 capsules/hr, GKF Capsylon 3005 features time-synchronized modular stations as well as height-adjustable metering disk that simplifies adjustment between product formats or filling amounts. Dosing station precisely fills sticky and fine-grained powders, while touchscreen assists in operating and administration of production parameters. Machine is suitable for applications requiring large batch runs and frequent product changes.

ESS Technologies, Inc.    Blacksburg, VA 24060
May 12, 2009 Able to palletize 25-30 RSC cases/min, robotic pallet cell incorporates FANUC robot, with vacuum-, gripper-, or hybrid-style end-of-arm-tooling; automatic pallet dispenser; and flow-through conveyor, all in 19 x 8 ft space. It can be configured to allow multiple zones and full pallet discharge can be in-line or 90°. All standard pallet sizes are accommodated and dozens of preprogrammed pallet patterns can be stored. System changeover for multiple case sizes takes 15-20 min.

DJ Products, Inc.    Little Falls, MN 56345
May 12, 2009 Able to haul loads up to 5,000 lb, Side Steer Powered Cart features variable speed twist grip that allows travel speeds of 0-3 mph both forwards and backwards. Heavy duty 24 or 36 V motors are powered by two or three 12 V batteries and can perform without recharging for entire shift. Ergonomically designed, self-propelled cart is suited for material handling applications where product overhang ends, making it impossible for operator to safely pull or push loads.

Worthington Steelpac    York, PA 17402
May 12, 2009 Made of flame-resistant galvanized steel, Steelpac Distribution Pallet is 100% cleanroom compatible and meets Grocery Manufacturers Association capacity and compatibility standards. Pallet is washable, does not attract or harbor insects, and works with automated palletizers since it will not crack or splinter. Measuring 48 x 40 x 5.5 in., pallet has 4-way fork lift and pallet jack access. It provides more than 3,500 lb of unsupported racking capacity and 40,000 lb of static load.

Newport Corp.    Irvine, CA 92606
May 11, 2009 Featuring self-centering pendulum design, S-2000 Stabilizer Series vibration isolators include laminar-flow damping system and precision auto-leveling valves as well as optimized leveling indicators and recessed lifting channels. They deliver 1 Hz vertical resonant frequency and vertical isolation efficiency of 98% at 10 Hz. Horizontal isolation begins at 2.5 Hz and reaches 95% efficiency at 10 Hz. Units are available in 6 heights ranging from 16-28 in.

General Machine Products Co.    Trevose, PA 19053
May 11, 2009 With plated-steel tubular design, utility manhole cover lifter allows individual to lift and remove heavy utility manhole covers quickly and safely, in variety of work environments and applications. It features spiked foot for secure traction on unstable ground surfaces such as sand, ice, or snow. Key options include small and large J-hooks, as well as heavy L-hook. All keys are made of heat-treated steel, while custom keys can be engineered for specific applications.

Identec Solutions, Inc.    Addison, TX 75001
May 11, 2009 Utilizing Intelligent Long Range technology to communicate over long distances and operate in harsh environments, IntelliFIND RTLS can determine specific location of individual assets to within less than 10 ft over area equal to 18 football fields. Intelligent tags can determine their own location and then initiate communication with handheld or fixed readers; information on tagged assets location is transmitted in real-time.

Alliance Plastics    Erie, PA 16510
May 08, 2009 Industrial indexing handles of HDA-Series are designed for securing and clamping various applications. Offered in 13 sizes for high-torque requirements or areas of confined space, glass-filled nylon handles offer push-button release to facilitate adjustment. HDST-series, similar to HDA-series, adds TPR (rubber) over mold for comfortable and secure grip. It also offers glass-filled PP base material and comes in 9 sizes for use in light- to heavy-duty applications.

SAS Automation, Ltd.    Xenia, OH 45385
May 08, 2009 Featuring lightweight aluminum frame construction, Bag Gripper is used to palletize woven plastic or paper bags containing products including grain, chemicals, dog food, minerals, and plastic resins. It uses stainless steel fingers with customized finger pitch to match roller conveyor. Over-center linkage design keeps fingers shut in case of pneumatic or electric loss ensuring that bag is not dropped. Optional pallet hooks and slip sheet vacuum cups are also available.

Holocom, Inc.    San Diego, CA 92121
May 08, 2009 Designed to integrate with Holocom Secure Raceway, Secure Mini Dukt(TM) minimizes footprint on wall without compromising security or user functionality. Reduced-profile cable carrier is constructed of powder-coated, galvanized steel and manufactured with minimal parts. Design is intended to reduce labor and accelerate installation of Holocom protective distribution systems (PDSs).

Gluefast Co., Inc.    Neptune, NJ 07753
May 07, 2009 Designed for binderies using animal glues for book covers, Colonel AG gluer features solid state controlled advanced heating system with digital temperature readout. It includes automatic dispensing system for replenishing water to glue tray and is available in roller widths of 20, 26, 32, and 42 in. Optional reversing pick-off point assembly presents operator with glued cover side up, speeding up gluing process.

R & M Materials Handling, Inc.    Springfield, OH 45502
May 07, 2009 Equipped with 2-speed Class F insulated motor, Spacemaster® SX features large drum diameter, which enables near true vertical lift and precise positioning of components during wind turbine manufacturing. Gearbox minimizes stress on drum bearings, and sealed trolley brakes require minimal adjustment over 1 million cycles. For safety, electro-mechanical load limit switch prevents lifting of loads greater than 110% of rated capacity and includes NEMA 4 Type enclosure.

DJ Products, Inc.    Little Falls, MN 56345
May 07, 2009 Designed to eliminate manual pushing of heavy garbage containers, Motorized Tilt Truck can haul loads up to 2,000 lb. Truck has variable speed twist grips that allow operator to travel at speeds of 0-3 mph forward or backward. With heavy-duty, 24 V motor powered by two 12 V batteries, truck can perform without recharging for up to 8 hr. Ergonomically designed vehicle is suited for daily duties in manufacturing and distribution facilities, convention centers, and hospitals.

Komatsu America Corp.    Rolling Meadows, IL 60008
May 07, 2009 With 299 net hp, WA480-6 has operating weight of 55,920-56,340 lb and dumping clearance of 10 ft 6 in. when equipped with 6.0 yd³ general-purpose bucket. KOMTRAX(TM) technology monitors machine operating information and relays it to secure website for analysis, increasing machine availability, reducing risk of theft, and allowing remote diagnosis. Also included, Large Capacity Torque Converter lends to machine's tractive effort, acceleration, and hill climbing ability.

Physik Instrumente (PI)    Auburn, MA 01501
May 06, 2009 Featuring 0.8 in. profile, PI nano(TM) Series delivers accurate motion with sub-nanometer resolution in 2 and 3 axes. Piezo controller is included and comes with 24-bit USB port, Ethernet, RS-232, and analog interfaces, as well as software support for all major image acquisition packages. For highly stable, closed loop operation, piezoresistive sensors are applied directly to moving structure and precisely measure displacement of stage platform.

TKF, Inc.    Cincinnati, OH 45203
May 05, 2009 With drive gears formed directly into its rollers, lubrication-free PosiGrip Accumulation Conveyor has no separate sprocket or gears and no welded drive components. Motorized rollers, each with adjustable acceleration/deceleration, are powered by smooth-operating and quiet, synchronous belting in positive drive. Along with self-contained electrical components, zero pressure accumulation conveyor has individually controlled zones up to 75 x 48 in. that support loads up to 400 lb each.

Schunk    Morrisville, NC 27560
May 05, 2009 UNILOCK NSA series provides rapid change over between setups with less than 0.0002 in. repeatability. Workpieces are positioned in place within seconds, ensuring absolutely secure clamping during machining. Fully sealed against contamination, series takes up minimal machine space while simplifying workpiece changing and providing reliable, clean, and chip-free support surface. Forced airflow removes chips and contamination from short tapers during automated pallet changing.

Schunk    Morrisville, NC 27560
May 05, 2009 Permitting run-out accuracy of less than 0.003 mm, TRIBOS-SVL Toolholder Extensions allow precise and smooth machining of workpiece areas that are difficult to access. Units can be combined with variety of toolholders, including TENDO hydraulic expansion toolholders, CELSIO heat shrink toolholders, and TRIBOS toolholders. When used with TENDO hydraulic expansion toolholders or TRIBOS-R polygonal toolholders, both systems have vibration damping effect.

Colson Caster Corp.    Jonesboro, AR 72401
May 05, 2009 Built from durable stainless steel, 2 Series Precision Swivel Forks feature permanently sealed and metal-housed precision bearings, eliminating need for monitoring and servicing of bearing structure. Precision swivel mechanism with tight, zero end-play characteristic provides smooth running with true fidelity of motion. Suited for corrosive and harsh environments, forks pair with assortment of 5 and 6 in. dia wheel products.