Pacline Conveyors    Buffalo, NY 14207
Sep 05, 2008 Designed to conserve plant space, powered C-250 Over/Under enclosed track conveyor system has support columns that allow materials to flow into area and give maintenance personal access to existing machines. Carrier design accommodates Cardwell 2300-DJ Slack Adjuster, and lift assist device at each workstation reduces physical requirements for operators. Other features include safety zone operation, touchscreen control panel, safety relays, and foot switches.

Anver Corp. - Anver.Com    Hudson, MA 01749
Sep 05, 2008 Used for loading and unloading operations, VT Series lets one person handle four 5 gal pails (50 lb each) at once without manual lifting. Unit can be integrated with ceiling mounted gantry crane and is available with range of vacuum pad attachments. Along with 4 pliable bellows-style suction pads that provide soft touch and secure hold under vacuum, product features ergonomic handle with up/down controls that can be adjusted to match user's hand strength.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Sep 05, 2008 Offered in standard sizes up to 1,000 liters in 2D and 3D configurations, TepoFlex(TM) bioncontainers are available with choice of absolute rated 0.2 µm EverLUX(TM) PES, 0.1 µm or 0.2 µm STyLUX® PES, and 0.1 µm or 0.2 µm SteriLUX® PVDF filters. TepoFlex film is virtually free of additives, minimizing extractable and leachable levels, and meets USP Class VI Plastics Guidelines. It is extruded, manufactured into biocontainers, and packaged in ISO Class 7 cleanroom.

Saint-Gobain Ceramics & Plastics, Inc.    Worcester, MA 01615
Sep 05, 2008 Available in 24 x 24 in. sheets, ThermaCool® TC2006/TC3006/TC3008 soft and compliant gap fillers can accommodate materials of varying coefficients of thermal expansion. Compression force enables them to span multiple components with minimal pressure, and thermal conductivity optimizes heat transfer. Intrinsically tacky, products require no adhesive and can also be ordered with fabric or scrim surfaces. They suit PCB, power supply, and other electronic applications.

Airpot Corp.    Norwalk, CT 06851
Sep 05, 2008 Constructed using graphite piston/borosilicate glass cylinder combination, Piston and Cylinder Sets respond to forces as low as a few grams and pressures less than 0.2 psi. Starting and running friction are almost identical, preventing jerky, uncontrolled starts. Exhibiting friction of less than 1 g without side loads, sets are unaffected by extreme temperature variations, run clean, and do not contaminate surrounding components. Cylinder bore sizes range from 0.220-1.75 in.

Fastrax Ltd.    Vantaa 01510  Finland
Sep 05, 2008 Integrating hardware and software, Track&Trace Platform is based on uTrace03 telematics module, which consists of GPS receiver, GSM/GPRS modem with quad band antenna, and connectors. Also included are development board, and automotive interface board with power supply, optional automotive bus connections, sensors, and flash memory bank. Software includes functions for GPS navigation, database for points of interest, and embedded file system for storing navigation and event logs.

Herkules Equipment Corp.    Walled Lake, MI 48390 1662
Sep 04, 2008 Featuring bolt-together design, A-Series General Industry Lift Tables are air-operated material handling scissor lifts that allow new components to be added when needed. Its power source, Air Bag(TM) technology provides direct 1:1 lift ratio, eliminating stress on the scissors, minimizing wear and maintenance. System raises pallets/containers to ideal height, from 7" to 32", eliminating the need for worker to strain and bend while unloading/loading material.

Anver Corp. - Anver.Com    Hudson, MA 01749
Sep 04, 2008 Featuring Easy Tilt quad-link system that helps retain vertical/horizontal position when properly centered on load, VP-Series Vacuum Lifter-Tilter handles loads up to 500 lb. Suitable for stone, glass, and plate handling, it has side handlebar that can be mounted to left or right, and lets users control pick-up with one hand and tilt with other. Powered by electric, compressed air, or battery, unit can be equipped with range of suction pad attachments.

Fleetwood, Inc.    Romeoville, IL 60446
Sep 04, 2008 Designed to depalletize multiple products to individual lines, Robotic Bulk Depalletizer removes products in full layer via magnetic or vacuum pick-head. Separator sheets are removed and stacked as are pallets themselves. Handling up to 8 SKUs at same time, Robotic Rotary Case Palletizer is suited for companies palletizing multiproduct rainbow packaging or with multiple lines feeding common palletizer. Unit features product confirmation via barcode scanning and ability to detect reject cases.

SmartMove(R) Conveyors    Fall River, MA 02720
Sep 04, 2008 Combining function of 2 independent drives within same framework, SmartMove® Multi-Lane Conveyor suits transfer and accumulating applications. Combination of bidirectional drive and seamless transferring can provide simple rotary and carousel accumulation/delivery systems. Compatible with Shortline and Long Line systems and accessories, unit comes in any combination of belting that totals less than 30 in. wide.

J. W. Winco, Inc.    New Berlin, WI 53151
Sep 04, 2008 Made of aluminum and available in metric and inch sizes, Solid Disk Handwheels feature highly-polished turned rim and matte gray, shot-blasted, satin finish that does not require painting or other surface treatments. They are gravity die-cast with concentric rim that is square to bore. Optional revolving handle is constructed of matte black nylon plastic with zinc-plated steel threaded spindle. Other modifications available include keyways and set screw holes.

IFH Group    Rock Falls, IL 61071
Sep 03, 2008 Capable of handling lubricants, hydraulic fluids, and cutting and engine oils, Model IFH-199 is suited for storing caustic materials, such as herbicides, degreasers, water based products, and water treatment chemicals. It also suits smaller lube rooms or fluids that are infrequently used. System provides clean, environmentally friendly product transfer, with no drum tipping, cleaning, and switching and no replacement of drum pumps, regardless of application.

Applied Materials, Inc.    Santa Clara, CA 95054
Sep 03, 2008 Extending HARP SACVD® gap-fill technology for critical STI2 device structures to 32 nm and beyond, Applied Producer® eHARP(TM) system delivers void-free films to fill less than 30 nm, greater than 12:1 aspect ratio features. High-density, strain-inducing films enable scaling of conventional planar and emerging 3D device structures. Virtually carbon-free, eHARP film requires no protective liners or capping layers, integrates with CMP processes, and provides reliable device isolation.

Enviroline Group (IECC)    Pompano Beach, FL 33069
Sep 02, 2008 Offering thin-film application of up to 20 mils DFT, Enviroline 375UHS is suited for use as internal lining for storage tanks, process vessels, pipelines, and concrete containment structures requiring corrosion protection from refined petroleum products and chemicals. It has VOC level of 95 g/l and meets South Coast Air Quality Management District (SCAQMD) regulations. Areas of use include oil and gas, as well as chemical processing industries.

Bishop-Wisecarver Corporation    Pittsburg, CA 94565 0209
Sep 02, 2008 Available in component form or as ready mounted assembly, HepcoMotion® HDS2 Heavy Duty Slide System is offered in 3 sizes, including 150 mm dia vee bearing and 144 mm dia taper roller bearing. Maximum single bearing capacity is 50kN. Low friction cap wipers expel dirt and debris while providing continuous lubrication. Slides and tracks are available in single piece construction up to 4 m long, and are offered in single or double edge format in V slides or flat tracks.

LPI Lift Systems    Eau Claire, WI 54703
Sep 02, 2008 Measuring 45 ft long by 72 in. wide, platform offers fall prevention system and work area for staging packing materials used in constructing shipping crates. With lift capacity of 1,500 lb, it extends from lowered height of 5 ft to maximum raised height of 12 ft 6 in. Unit has 2 independent control stations, floor mounted pedestal control station that includes Emergency Stop, Z-axis control for up and down movement, and Y-axis control for extension/retraction of platform movement.

Specialty Equipment    Houston, TX 77055
Aug 29, 2008 Designed to transfer empty drums from conveyor and stack them onto pallet, Model EDP-500 air-over-electric system loads 30-55 gal steel, fiber, or poly drums in 4, 5, or 6 drum pattern, onto pallet. Average load time is 4 drums/minute, and automatic pallet dispenser is available to discharge waiting pallet. Featuring steel components and all-welded construction, unit has selector switch to keep transfer carriage in home position allowing tall IBC to pass through.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Aug 28, 2008 Built with features that maximize production efficiency, Material Master(TM) low-headroom unit has 145 in. overall height and can be custom-designed to fit individual application requirements. It incorporates 316 stainless steel Seal-Master(TM) bag spout access chamber, 316 stainless steel product contact surfaces, and heavy-duty Flo-Master(TM) massaging system. Also, low-headroom electric hoist with motorized trolley allows bulk bags to be safely loaded without forklift.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Aug 28, 2008 Fitted with direct pressure media delivery module, Model 8-EP is suitable for processing components with large amount of surface area and for surface treatment operations such as descaling, etching, coating removal, and surface preparation. Consisting of cyclonic separator linked to ASME-certified pressure vessel, pressure-blast module is attached to rear of blast cabinet. Most types of dry blast media can be used, including plastic grit, glass beads, and fast-cutting mineral grit.

DE-STA-CO Industries    Madison Heights, MI 48071
Aug 28, 2008 Offering max holding capacity from 295-1,680 lb, horizontal handle hold-down action clamps of 2013, 2017, 2027, and 2037 series incorporate ergonomic handle grip, 2 flanged washers, and spindle assembly. Straight base options are available, and knob on end of open U bar prevents spindle slippage. While low pivot points provide for perpendicular clamp force, straight downward action helps prevent workpiece movement in fixture. Hand clearance in open position eliminates pinch points.