Henkel Corporation    Rocky Hill, CT 06067
Sep 16, 2009 Loctite® Pneumatic Hand-Held Cartridge Dispenser simplifies manual application of adhesives packaged in 300 mL cartridges or 250 mL tubes. Unit pneumatically pressurizes any cartridge/tube inserted into its drawn aluminum barrel. Adhesive dispenses through nozzle when trigger is pressed, and built-in pressure regulator adjusts to accommodate range of viscosities. Unit also includes rotating air hose fitting for quick disconnect and dump valve for pressure relief.

Plastican, Inc.    Leominster, MA 01453
Sep 16, 2009 Container 36BR is designed to provide cube efficiency and volume packaging of goods for food, consumer, and do-it-yourself markets. Suitable for liquids as well as moist, dry, and frozen goods, these rigid yet lightweight containers tolerate wide temperature range. Produced using high-density polyethylene (HDPE) or propylene, they are available with hinged lids and feature tamper-evident tear strip. They can also be stacked, nesting closely to maximize number of units per pallet.

CPD Industries    Montclair, CA 91763
Sep 15, 2009 Available in 10 sizes for transport and protection of large and extra-large equipment, Ruggedized ROTO-PACK Cases feature rotationally molded, seamless polyethylene shells and interior custom foam fixtures. Watertight and dustproof products, resistant to chemicals and heat, protect contents against damaging impact, vibration, and rough handling. Positive anti-shear locks prevent lid separation after impact, and molded-in ribs and corrugation allow for secure, non-slip stacking.

AZCO Corp.    Fairfield, NJ 07004
Sep 15, 2009 Combining state-of-the-art electronics and fiber optics, SUR-PAK(TM) VIP-100 self threads material and automatically adjusts height of discharge with touch of color display. Unit can be remotely accessed through Internet to reset factory settings or upgrade software package. Cantilever design facilitates cleaning and servicing, while dual tracker drive section automatically opens for access. Changing pouch sizes can be done without tools in 90 seconds.

Advance Lifts, Inc.    St. Charles, IL 60174
Sep 14, 2009 Instant Dock model 6568 requires users to place this dock lift on existing concrete pad, lay it down, and plug it into available electrical power source. Along with 6 x 8 ft platform, lift incorporates self-contained, 5 hp power unit with 5,500 lb lifting capacity. This product, which facilitates safe loading or off-loading of trucks, is suited for locations that do not have dock area.

Pelican Products, Inc.    Torrance, CA 90505
Sep 14, 2009 Intended for one-person transport, 1740 Long Case features 2 double-wide handles; wide-track, polyurethane wheels with ball bearings and nylon hubs; and 6,600 in.³ storage space. It can be moved manually or stacked on pallets. Built for longer equipment, 1770 Long Case has 7,300 in.³ storage space, is 54.58 in. long, and offers same attributes as 1740. Both feature open cell core and polymer wall construction, lid with polymer o-ring, and dual pressure equalization valves.

Schunk    Morrisville, NC 27560
Sep 14, 2009 Universal toolholder SINO-R is based on expansion technology system with solid body as pressure medium and utilizes actuation key to clamp quickly. Radial rigidity and dampening minimize noise, and tool holder offers maximum torque transmission of 850 Nm at clamping diameter of 32 mm. Precision-balanced unit includes intermediate sleeves, enabling all common shank diameters to be clamped.

Hydramaster    Mukilteo, WA 98275
Sep 14, 2009 Rust-proof HydraCradle tank system features live center vacuum hose reel with powered retraction. It stores up to 250 ft of 2 in. vacuum hose and offers 125 gal of tank capacity. Unit can accommodate up to 3 roto-molded reels for solution and garden hoses, with option of adding live centers.

Toyota Material Handling U.S.A., Inc.    Irvine, CA 92623-7419
Sep 14, 2009 Available in 4 models, IC pneumatic lift trucks feature 33,000, 40,000, 44,000, and 51,000 lb capacities at 36 in. load center. Trucks include 6.7 L J-Series Hino diesel engine that operates with minimal noise and emissions, and 2-speed transmission that meets EPA Tier 3 regulations. They have fully oiled lift cylinders suited for harsh environments, wet disc brakes, and electronic parking brake engaged/disengaged via button. Vibrations are absorbed by cab mounting system and control levers.

Safway Services, LLC    Waukesha, WI 53188
Sep 14, 2009 SafAscent(TM) Wind Turbine Platform allows access to wind turbines for maintenance, repair, inspection, and cleaning. It features 6 ft 6 in. modular platform with steel wind cage stirrup, as well as 3 sets of removable, padded roller systems that protect tower and blades from damage. With 500 lb capacity, system can lift 2 workers and tools. Kit includes platform, hoist, and accessories which exceed OSHA, OH&S, and ANSI standards and meet all UL and CSA requirements.

Nedpack    Harderwijk 3846CE  Netherlands
Sep 11, 2009 Constructed according to lean manufacturing processes, entry level model Prorunner MK5 Continuous Vertical Conveyor can transport products to any desired level. System features enclosed drive system and can be equipped with infeeds and outfeeds at various levels. Designed to meet stringent hygiene requirements, conveyor is suited for applications ranging from food handling to logistics operations.

CoreFlow Ltd.    Yoqneam 20692  Israel
Sep 11, 2009 Dealing with accurate separation of wafers, SingFlow(TM) is fully controlled with automatic compensation for wafer thickness variation and also offers automatic detection/sorting of broken wafers. Stress-free, pure-shear singulation concept delivers fully automated production system that promotes efficiency, throughput, and yield. Modular design, based on throughput requirements, supports output to different configurations of lane-based cleaning systems and/or cassette loading.

Keystone Electronics Corp.    Astoria, NY 11105
Sep 11, 2009 Designed for surface or through-hole mounting, 1/3N Lithium Battery Holders are supplied with heat-resistant, UL 94V-0 rated nylon housings suited for all soldering and reflow operations. SMT version features gold-plated phosphor bronze contacts, while THM version incorporates tin-plated phosphor bronze contacts and mounts directly on PCBs.

Reel-O-Matic By Reel-Neat Systems, Inc.    Oklahoma City, OK 73143
Sep 08, 2009 Operated with wireless radio remote control, Cat-Walk FMPT4/FMP8 is powered by AC Vector variable-speed torque controlled drive system and accommodates respooling speeds from 0-115 rpm. Shaftless FMPT4 handles reel diameters up to 60 in. OD and up to 4,000 lb, while FMP8 is engineered to support same reel diameters but up to 8,000 lb. Latter also includes hydraulically powered pay-off and rewind assist benefit which feeds and rewinds cable to and from FMPT4.

Tapco, Inc.    Bridgeton, MO 63044
Sep 04, 2009 Available in polyethylene, nylon, and urethane, CC-XD (Xtreme Duty) buckets have prime virgin resins throughout entire bucket, not just critical wear points, to enhance durability/strength. Manufacturing molds used for 12 x 7, 13 x 7, 14 x 7, and 16 x 7 in. sizes ensure identical, consistent bucket profiles with no variance in critical specifications such as dimensions, proportions, and wall thicknesses. Also, smooth and rounded front lip allows bucket to cut through grain.

Nu-Star, Inc.    Shakopee, MN 55379
Sep 03, 2009 Power Tug(TM) is pedestrian-operated pusher with telescopic front legs and mono-drive wheel design with stabilizing castors allowing smooth operation on uneven surfaces. Electric actuator enables adjustment of single or dual legs to various heights. System also includes automatic braking and emergency reverse and onboard battery charging. Its programmable control system with butterfly speed control lets user set acceleration/deceleration limits.

AGI - American Grippers Inc.    Trumbull, CT 06611
Sep 03, 2009 Featuring height of 0.813 in., AGPS parallel gripper features 1-piece body and stationary jaw design, integrated with precision T-slot bearing design supported full length of body. It features aluminum base and carriage bearing manufactured from Ampco 18 aluminum-bronze. Providing grip force of 15-25 lb, mini-linear actuator gripper is offered with bore sizes of .5 and .75 in. available in .5, 1.0, 1.5, and 2.0 in. strokes.

Westfalia Technologies, Inc.    York, PA 17402
Sep 03, 2009 Equipped with 3-strand conveyor for transferring pallets on and off, Vertical Lift is capable of handling either 1 or 2 pallets simultaneously, with maximum vertical speed of 200 ft/min. It uses 2 gear motors mounted on floor level, mechanically linked with drive shaft and driven with AB PowerFlex 700 drive. Lift offers cycle time of 20 sec for 8 ft 9 in. travel distance, including time for pallets to move and off lift, and for lift to move back to its original position.

SERAPID, Inc.    Sterling Heights, MI 48314
Sep 02, 2009 Designed for Quick Die eXchange (QDX) equipment, Motorized Bolster Extensions (MBEs) combine functionality of bolster extensions and push-pull systems into one integrated unit. They support die outside of press and move die in and out of press. Able to be loaded with overhead crane or fork-truck, each product features Rigid Chain Technology that allows die to be positioned several inches onto bolster without special attachments. Capacity ranges from 10-25 tons.

Kennametal, Inc.    Latrobe, PA 15650-0231
Aug 31, 2009 Designed for machining centers and multi-tasking machines, shrink-fit toolholding system includes 2 series. GP (General Purpose) series accommodates carbide, HSS, and steel shanks with clamping torques suitable for general engineering, die and mold, automotive, and other machining tasks. (High Torque) series accommodates heavy roughing operations requiring higher clamping torque levels or machining of difficult-to-cut materials. Shrinking and cooling process does not exceed 30 sec.