Cryopak Industries, Inc.    Delta, BC V3M5R4
Jan 31, 2012 Featuring outside dimensions of 25.25 x 22.25 x 23.0 in., TimeSaverCN72(TM) Shipper maintains 2-8°C throughout shipment in extreme cold shipping environments. Container is pre-qualified against temperatures down to -25°C for 72+ hours. Using VIP and PIR insulating materials, shipper is commonly used for temperature-sensitive pharmaceuticals, drugs, clinical trials, and biologicals.

DeVilbiss Automotive Refinishing    Swanton, OH 43558
Jan 31, 2012 Designed to simplify automotive refinishing process by minimizing buffing and rework, DeVilbiss® CLEAN(TM) Anti-Static Wiper and Bumper Prep Pad can be used alone or together. Anti-Static Wiper is OEM-approved dry wiper designed to eliminate paint defects caused by dirt and static imbalance. Lint-free and able to be used between numerous applications, Bumper Prep Pad cleans, abrades, and degreases new unprimed plastic parts and bumpers in one step.

Southworth Products Corp.    Portland, ME 04104 1380
Jan 30, 2012 Available in fork-over and straddle designs, Stack-n-Go(TM) stackers are designed for maneuverability and built on short, stable wheelbases. Multi-purpose machines can be used for transporting loads on pallets and stacking loads up to 7 ½ ft high and can also serve as adjustable workstations for loading/unloading. Offset control handle and 62 in. high mast give operator clear forward view, and ergonomic handle puts all controls within reach.

Miller Fall Protection    Franklin, PA 16323
Jan 27, 2012 Combining web-based information management software service with UHF and RFID-enabled Miller® fall protection equipment, ESP(TM) Enabled Safety Products System provides real-time tracking control and safety compliance management. Users can control and monitor harnesses, lanyards, and self-retracting lifelines through customized web portal, set up and hosted by Honeywell. System also tracks equipment assignment, usage, product advisories, special training requirements, and personnel training status.

Hitachi High Technologies, Inc.    Schaumburg, IL 60173-2295
Jan 26, 2012 In 30 minutes, Sigma G5 can change from high-speed mounter to fine pitch placer. Unit is equipped with Over-Drive Motion, which allows either placement head to pick components from front or rear feeder cart without restrictions. Direct Drive Head offers wide component handling range of 0402 mm x 44 mm² x 12.7 mm, while multi-function head provides additional flexibility for SiP, MCM, and Flip Chip assemblies.

Burr Oak Tool    Sturgis, MI 49091
Jan 26, 2012 Designed for round and flat-tube coils up to 3 m long, Electric Coil Form Machine produces bends in single row coils or multiple single-row coils joined at one end. Single, vertically oriented bend arbor produces one, two, or three 90° bends, creating L-, U-, or box-shaped coils. To avoid forming wrong radius, RFID matches part data to arbor cover. Options include slip sheets, coil length measurement, inside coil pusher, bar code scanner, and coil staging table.

Key Technology, Inc.    Walla Walla, WA 99362
Jan 26, 2012 Integrating Iso-Flo® dewatering shaker, Flo-Belt, and Manta® 2000 series sorter, Wet Spinach Sorting System can sort up to 5.5 tons of finished product/hr. On Manta, spinach leaves are inspected by fluorescence-sensing lasers and top- and bottom-mounted Vis/IR cameras, maximizing removal of foreign material and leaf defects. With stainless steel construction, watertight double gaskets on doors, and sealed control panel, Manta operates in harsh environments and withstands high-pressure washdowns.

H2W Technologies, Inc.    Santa Clarita, CA 91350
Jan 25, 2012 Utilizing 0.1 micron resolution encoders for optimal accuracy and repeatability, custom XY gantry has 1 x 1 in. stroke and supports moving coil option that reduces moving mass and increases acceleration. Bottom axis uses 2 voice coil actuators in parallel, and gantry can be driven with DC servo or DC linear amplifiers and 2-axis programmable motion controller. For top and bottom axes, respective ratings are 2.3 and 4.6 lb for continuous force and 6.9 and 13.8 lb for peak force.

Jergens, Inc.    Cleveland, OH 44110
Jan 25, 2012 Combining hoist ring strength and safety with shackle versatility, Shackle-Lok(TM) has internal ball bearings within tamper-resistant design that provides smooth 180° pivot and 360° swivel action under load. U.S. manufactured product, available in inch and metric sizes, features 3-piece design and works with numerous thread sizes. Bolt can accommodate various alternate styles, and removable anchor shackles are interchangeable. Product is CE-certified and conforms to ASME B30.26 and RR-C-271F.

Larson Electronics, LLC    Kemp, TX 75143
Jan 23, 2012 Used to connect lighting and tools without tangles and cord pileups, EPLRT-50-HR contains 50 ft of 16 AWG, abrasion- and chemical-resistant SOOW cord on slip ring housing that can be extended or rewound as needed in hazardous environments. Class 1 Division 1 explosion proof twist lock plug receptacle, included, provides secure and pull resistant connection, while spring loaded ratchet and 4-roller, adjustable cable guide with ball stop facilitate cord winding/unwinding.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Jan 23, 2012 As self-contained 802.11 WiFi® module, Type VK module (part No. LBWA1ZZVK7-539) enables connectivity features on MCU-based devices and also provides RF compliance in USA, Canada, and Europe. This integrated subsystem contains SimpleLink(TM) Wi-Fi CC3000 self-contained 802.11 network processor, with architecture that lets WiFi driver and firmware reside within module memory. Peripheral items include clock sources, power management, signal conditioning, persistent memory, and RF front-end.

Totech Europe B.V.    Dronten 8253  Netherlands
Jan 20, 2012 Designed to exceed challenges associated with IPC J-STD-033B.1 for handling Moisture Sensitive Devices, XSD Series can dry PCBs without oxidation and inter-metallic growth induced by baking. Cabinets employ dual-wall, insulated steel and glass design and U5002 Dynamic Series closed loop dehumidification. Consuming less than 30 W/hr on average, cabinets deliver optimal humidity levels below 0.5% RH, vapor content less than 0.6 g/m³, and recovery time of less than 240 sec after door opening.

Mitsubishi Heavy Industries America, Inc.    New York, NY 10111
Jan 20, 2012 Eliminating heat stress and strain in bonding process, Bond Meister MWB-12-ST produces 3D integrated LSI (large-scale integration) circuits at room temperature. Fast atom beam (FAB) gun irradiates atoms for activating material surface to bond, and up to 20 ton weight loading is applicable for bonding. In addition to being able to perform wafer transfer and alignment, machine accommodates setting of bonding conditions for individual wafers for production of various types in small lots.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 19, 2012 Designed for unlocking safety tumblers in sliding or rotating doors, straight shank Series GN 331 and angled Series GN 332 are available with 1 or 2 buttons. Handle tubing is aluminum with either textured, matte black, plastic powder-coated finish or anodized with natural color. By integrating functions such as emergency stop, start, release, reset, and LED status display, RoHS-compliant handles allow machine to be monitored and operated directly at door or gate.

Flexicon Corporation    Bethlehem, PA 18020 8006
Jan 19, 2012 With 2 hydraulic rams and contoured end plates, BLOCK-BUSTER(TM) presses opposing sides of bulk bags to loosen material that solidified during storage/shipment. This facilitates discharge through bag spouts by bulk bag unloaders. With motorized hoist and trolley, cantilevered I-beam allows loading/unloading of bulk bags without forklift. Bag may also be raised/lowered using hoist and rotated manually. System controller and hydraulic pump can be mounted on exterior of safety cage or remotely.

RWM Casters Corp.    Gastonia, NC 28053-0668
Jan 19, 2012 Designed for easy rolling, 60D Solid Urethane Wheels are constructed of PTMEG polyurethane and feature metal bearing retaining sleeve that prevents premature bearing failure when used in high-speed, high-load applications. Non-marking wheels are resistant to grease, oil, chemicals, and moisture as well as chunking, cutting, and abrasive wear. With capacities from 700-3,000 lb, products come in 7 standard configurations with 5 diameters from 4-10 in. and wheel widths of 2 and 3 in.

Mitsubishi Heavy Industries America    Leetonia, OH 44431
Jan 19, 2012 Utilizing fast atom beam gun to irradiate atoms for activating material surface, Bond Meister MWB-12-ST can provide continuous bonding of up to five 12 in. wafers and perform wafer transfer and alignment for automatic bonding. FAB gun effectively removes oxide film on surface of bonding metal material that normally impedes bonding. By eliminating heating process, room-temperature bonding frees devices from heat stress and eliminates need for heating/cooling cycle.

Star Packaging Corp.    Atlanta, GA 30349
Jan 19, 2012 Suitable for virtually any flexible packaging application, 100% polyethylene TerraFLEX RP Pouches feature moisture barriers and can incorporate oxygen barrier to further protect content quality and freshness without affecting film clearness or compromising recycling stream. Pouches are available in matte and gloss finishes and can accommodate up to 10-color printing to maximize product's shelf-impact. Applications range from food and beverage to lawn care products.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Jan 18, 2012 Featuring 56-bushel design, Poly-Trux® 78P replaces metal, canvas, and vinyl basket trucks with waterproof, rotationally molded plastic cart that cannot rust or harbor mold or bacteria. Ergonomic front cutaway facilitates access to laundry with minimal bending and reaching. Set atop powder coated metal base on non-marking Colson casters, cart is available with optional cover for secure clean linen delivery and optional fork tubes for safe handling by lift truck.

Cryopak Industries, Inc.    Delta, BC V3M5R4
Jan 17, 2012 As off-the-shelf qualified solution for room temperature shipments, TimeSaver 24 CRT Mini keeps product between 20 and 24°C during shipment in hot or cold environments for up to 24 hr. Room temperature pre-qualified shipper is suited for shipment of blood products, tissue samples, and pharmaceuticals that must remain in 15 to 30°C range. Measuring 9.5 x 8.675 x 7.25 in., shipper has payload of 1-4, 20 ml vials.