Anver Corp. - Anver.Com    Hudson, MA 01749
Mar 12, 2009 Available in one- and two-finger styles and designed for horizontal handling, Hand Vacuum Suction Cups eliminate danger of holding materials by the edges, which can cause hand injury and damage. Vacuum cups feature all rubber construction and can lift non-porous, light sheet materials by being pressed onto surface, and are released by moving a tab. One-finger style cup measures 2.25 in. OD, while 2-finger version has 3.25 in. OD.

Forta Corporation    Grove City, PA 16127
Mar 11, 2009 Asphalt reinforced with FORTA-FI(TM) exhibits reduced rutting and cracking for extended longevity. Requiring no additional equipment or modifications in placement/compaction practices, fibers distribute uniformly and evenly within seconds when mixed in drum or batch plants. Material contains aramid and polyolefin fibers as well as other materials known for their strength, durability, and binding properties. Hot and Warm Mix Asphalt as well as hot/cold patch formulations are available.

Bluestar Silicones USA Corp.    East Brunswick, NJ 08816-1100
Mar 11, 2009 Silcolease® POLY 366 solventless silicone polymer offers flat release profile over range of matrix stripping and label dispensing speeds. Providing flexibility to optimize formulations to meet specific substrate, manufacturing, and application needs, solution enables converters and label dispensers operate within range of speeds without compromising production line efficiency or quality. It is designed to be used with Silcolease® Optima series technology.

Ermanco, Inc.    Spring Lake, MI 49456 9652
Mar 10, 2009 Using same frame and drive components, NBC(TM) (Narrow Belt Conveyor) may be configured into zero-pressure contact accumulation, non-contact accumulation, and transportation conveyor. This reduces equipment and installation expenditure, and additional savings result from ability to power up to 4 curves and spurs off either end of conveyor using one drive. Logic modules my be set, in field, for zero-pressure contact accumulation or non-contact accumulation.

QC Industries    Batavia, OH 45103
Mar 10, 2009 Automation Series incorporates Tension Release Tail, which facilitates and accelerates belt changes and under-belt cleaning. With one push of button, Tension Release Tail relieves tension on belt by flipping up and out of the way. No tools are required, and tail reseats with gentle push to reapply original tension. This feature, standard on all Automation Series conveyors, is also compatible with all QC Industries' side rails and guides as well as flat and v-guided belts.

Flexicon Corporation    Bethlehem, PA 18020 8006
Mar 10, 2009 Model BFB Basic Bulk Bag Filler is equipped as standard with fill head height adjustment via fork truck to accommodate all popular bag sizes. It features inflatable cuff to seal bag inlet spout and feed chute vent port for dust-free air displacement during filling. Unit's patented design with two on-center posts offers structural integrity, while providing access to bag spout and loops.

Cornerstone Automation Systems, Inc.    Prosper, TX 75078
Mar 10, 2009 In about 10-15 ft of space, ShipMaster 900 can scan order ID, weigh, print/apply shipping label, verify label, and manifest. Able to replace 2-4 manual operators, system includes infeed/outfeed conveyor, automation center with PC-based controller, in-motion scale, fixed position order ID scanner, and fixed position label verification scanner, as well as scanner interface, CASI print and apply, and system control software with file sharing API.

Positech Corp.    Laurens, IA 50554-1299
Mar 09, 2009 Conco AJL offers lifting capability from 165-665 lb along with a lift range of up to 120 in. and reach from 8-16 feet. Features include threaded interface at end of cable and safety latch hook at end of chain. Secondary arm can be mounted above primary arm in low headroom clearance applications, and primary and secondary joints come with 360° continuous rotation. It can be mounted on overhead trolley, pedestal, wall mounted, or mounted on mobile/portable base.

DAILY RFID CO.,LIMITED    Guangzhou, 510403  China
Mar 09, 2009 Designed to track and manage mobile and fixed assets, DL810, 13.56 MHz RFID asset tracking solution has readability up to 90 cm and uses anti-collision algorithm to enable stack of tagged assets to be scanned simultaneously. Installed throughout entrance, multi-tag reader can help to find assets even if they are placed in wrong location.

Optima Electronic Packaging Systems    Lawrenceville, GA 30043
Mar 09, 2009 Suited for transporting and storing of medical devices, supplies, and computing equipment, mobile lab carts feature modular design that provides flexibility in heights and locations of shelves, drawers, and mounts. Mounts include monitor mounts for top of cart and CO₂ tank mounting on side. Customizable carts feature egress holes for cable routing, corner bumpers for protection and aesthetics, and front-locking casters that can keep cart in fixed position.

Flexicon Corporation    Bethlehem, PA 18020 8006
Mar 09, 2009 All-stainless Sanitary Bag Dump Station for pneumatic conveying systems collects dust created during manual dumping of bulk materials from bags, boxes, drums, and other containers and allows tool-free wash down. High velocity vacuum fan draws airborne dust from operator's atmosphere onto 2 cartridge filters, which are accessed by removing interior baffle, and replaced using quick-disconnect fittings. Unit is also available mounted on frames with casters for in-plant mobility.

Assmann Corp. of America    Garrett, IN 46738 1844
Mar 09, 2009 With 450 gal holding capacity, double wall rectangular, low profile BC450 is designed to hold chemical tote bins for up to 3½ hr and offers partially sloped bottom for near complete draining from top suction. It is constructed from rugged, crosslink polyethylene or FDA approved and NSF certified linear polyethylene. Features include molded-in forklift access, 2½ in. thick mild steel epoxy coated grating, and complete fill assembly including ball valve and chemical transfer hose.

BASF Corp.    Wyandotte, MI 48192
Mar 09, 2009 Producing paint colors with low odor and zero VOC content per U.S. Environmental Protection Agency Method 24, PureOptions colorants are designed for paint manufacturers, and retailers. These colorants are also free of alkylphenol ethoxylates, and do not require special equipment to prevent drying and clogging at tip of dispensing nozzle.

SERAPID, Inc.    Sterling Heights, MI 48314
Mar 06, 2009 Designed to work with dies with flat edge, PSH C-Clamp forms bracket device when mounted on T-profiled base, which is then manually inserted into slot on bolster or slide. Hydraulically activated clamp can be opened with spring, and clamping height can be individually configured through height of base piece or using custom-sized spacer.

Sly, Inc.    Cleveland, OH 44101
Mar 06, 2009 With internal ventilation design, dust free loading spouts capture airborne material. They can handle materials up to 4 in. across in excess of 400 cfm with vertical travel up to 20 ft. Features included are 3/60/230/460 Vac motor, reducer, chain and sprocket drive, molded polyethylene internal stacking cones, RoadStar® 18 outer shroud and fully wired and enclosed electricals. Units also incorporate Slack-Cable limit switches, level sensor, control pendant, and explosion-proof electricals.

Hobart Welding Products    Lithonia, GA 30058
Mar 05, 2009 Portable CO₂ Cylinder Kit features 20 oz paintball cylinder that delivers 40 min of continuous arc time on mild steel. Fixed-flow regulator, gas hose, and mounting bracket and hardware are also included. Kit can be mounted on Handler® 140, 187, and 210 models as well as other popular MIG welders.

Meadows, W.R., Inc.    Hampshire, IL 60140 0338
Mar 05, 2009 Composed of 100% recycled synthetic rubber, ECO-JOINT is flexible, chemical-resistant, and UV-stable. It is compatible with most hot and cold joint sealants and will not deform, twist, or break with normal handling. Suited for both interior and exterior environments, ECO-JOINT acts as bond breaker and contains no asphalt. Applications include roadways, airport runways, sidewalks, pavement patch repair, driveways, flooring, parking lots, flatwork, patios, and curbs.

J. W. Winco, Inc.    New Berlin, WI 53151
Mar 05, 2009 Available in aluminum or stainless steel, RoHS-compliant products series GN 666.4 consists of metric sized Tubular Arch Handles that feature matte black glass-filled nylon plastic (polyamide) legs with zinc-plated steel tapped inserts for mounting. Cover caps are matte black nylon plastic, and tubing on aluminum versions is available with black pebble-coated or natural anodized finish. For stainless steel versions, tubing has matte polished finish.

Fixtureworks    Fraser, MI 48026
Mar 05, 2009 Suited for high volume, repetitive jobs, Imao® Pull Clamps provide workpiece locating using precision ground clamping pins in conjunction with fixture-mounted clamp mechanisms. Clamping bases come in 2 operating ranges, one for standard duty workloads with clamping forces of 200 and 550 lb, and heavy-duty series that provides 1,348 or 1,798 lb of clamping force. Each style of clamp features 3 hole locations for attaching handle, allowing user to select best clearances.

Yale Materials Handling Corp.    Greenville, NC 27834
Mar 05, 2009 Designed for maximum uptime, Series ERC-VG is equipped with electric motor and CANbus electrical system, which minimizes wiring and electrical connections. Drive axle absorbs significant forces during normal operation, while canted load rollers on mast absorb front-to-back and side-to-side forces for minimized adjustments. Industrial grade hydraulic components include O-Ring Face Seal fittings, 10 micron hydraulic filter, and cast iron stacked valve sections.