Select Fabricators, Inc.    Canandaigua, NY 14424
Feb 19, 2013 Available in 3 sizes to accommodate range of devices, Select-A-Shield™ pouches feature royal blue ballistic nylon layer that provides discrete security, prevents signals from entering/exiting wireless devices, and allows use in all types of conditions, including inclement weather. Sports nylon layer also repels materials such as debris and dirt and provides impact resistance. Pouches are made starting with 2 layers of conductive silver/copper/nickel material with double rollover closure.

Hitachi High Technologies, Inc.    Schaumburg, IL 60173-2295
Feb 18, 2013 Providing splice-free, continuous operation in SMT component placement industry, 8 mm SL Feeder resolves issues caused by reel splicing, including improperly spliced tape that interrupts production. Unit allows addition of secondary reel supply in same feeder at any time during operation. In addition, SL Feeder accepts strip-tapes, and uses cover tape process that mitigates release of dust and debris inside placement system, minimizing maintenance requirements.

Cat Lift Trucks    Houston, TX 77081
Feb 15, 2013 Providing 4,500–6,500 lb capacities, EC22N2–EC30LN2 Series is equipped with 3-phase AC technology and separate drive, hydraulic, and steer motors that deliver exact performance level required. For operator comfort, 4-wheel trucks include 3-way adjustable full-suspension seat; hydraulic levers located next to seat allow operator's arm to rest in natural, relaxed position when operating controls. Options include LED work lights, 4-stage quad masts, sideshifter, and foot directional control.

Hennig, Inc.    Machesney Park, IL 61115
Feb 15, 2013 Manufactured in widths from 4–80 in., 2 ½ in. pitch steel belt can accommodate applications that involve producing/removing chips or moving parts/scrap pieces. Belt hinge is designed as one continuous piece, and incline covers (top hat design) can be included when larger amounts of stringy or balled chips are to be removed from machine. Conveyor can also be used with Chip Disc Filtration (CDF) systems, which filter down to 25 microns.

MAG IAS, LLC    Erlanger, KY 41018
Feb 15, 2013 CCR changing system automatically exchanges fresh cut/clamp/restart (CCR) unit whenever needed on fiber placement machines, eliminating downtime and allowing machines to maintain full production rates. This increases machine utilization on part production through minimized interruption of part layup. One end effector is automatically exchanged for second that processes same width material utilizing docking stand outside work zone. Features include high-speed cut and add-on-the-fly rates.

IAC Industries    Brea, CA 92821 2926
Feb 14, 2013 With Smart Mobile Stations, users can take computers, printers, scanners, and files to task-oriented environments. Units feature heavy-gauge steel cantilever base rolling on no-mar polyurethane wheels with brakes that lock rotation and swivel of caster wheel. Extruded aluminum channel structure, rising from rear of base, incorporates up to 10x 110 Vac electrical outlets with master switch and 8 ft power cord. Premium series adds rechargeable battery pack for cordless power.

RPC Containers Ltd    Rutland LE15 6RW  United Kingdom
Feb 14, 2013 Designed to help brands improve sustainability and on-shelf impact, 310 container has stackable shape that maximizes space utilization during storage and transport. Weight of container helps reduce end-user's carbon footprint, while labeling area size fosters design and marketing opportunities. Embossed decoration option is also available, and ergonomic design aids handling and usage. Container also comes with all required UN certifications for transport of dangerous goods.

United Silicone    Lancaster, NY 14086
Feb 14, 2013 Using a combination of heat, pressure, and dwell to permanently apply pre-printed graphics to part, Evolution HT - Grower’s Edition is designed specifically for nursery containers requiring high-speed application of multi-color heat transfer decals up to 355°. Machine can decorate full color graphic images while providing planting instructions, barcodes, and other relevant information. In addition, branding with permanent decorating eliminates need for stick, which often gets lost or thrown away.

United Silicone    Lancaster, NY 14086
Feb 14, 2013 Using combination of heat, pressure, and dwell, Transgrafix HT applies pre-printed, full color graphics permanently to cylindrical parts. Platform utilizes silicone rubber roller mounted to vertical stamping head for peripheral marking, and ability to combine full color decoration with metallics can be accomplished in one pass.

FIPA, Inc.    Atlanta, GA 30318
Feb 13, 2013 With high gripping force of 22 N, Sprue Gripper GR04.101A provides large area sprue control for detection of sprue in gripper regardless of position. Large jaw opening and compact construction allow for flexible integration into gripper systems, while Hartcoat® treated surfaces ensure wear resistance.

Instron    Norwood, MA 02062-2643
Feb 13, 2013 Available in 22,000 and 56,000 lbf capacities, Manual Wedge Grips are suitable for tensile tests on composites, metals, and plastics over temperature range of -112 to +482°F. Grips incorporate moving body, driven by worm gear drive, which closes jaw faces together in self-centering action to clamp specimen. Symmetrical construction of grip body provides even clamping of specimen under load. Together, these features ensure accurate specimen alignment, satisfying Nadcap AC7122-1 and AC7101.

S2 Security Corporation    Wellesley, MA 02481
Feb 13, 2013 As single-box solution, S2 NetBox VR Quatro couples integrated S2 NetVR video management system (VMS) with S2 NetBox enterprise security management system (SMS) and 4-slot network node. Access control, event monitoring, and video surveillance are managed through Web browser via usability-optimized UI. Base offering is licensed for 4 IP cameras and 4 portals, with expansion options that support sites with up to 8 recorded cameras and 8 full access control points.

Appleton Mfg. Div., Productive Solutions, Inc.    Neenah, WI 54957
Feb 13, 2013 Light Duty CartMover™ is intended for use in applications where load to be moved is at lower end of Standard Duty model's 100–20,000 lb capacity. Featuring upright configuration with self-contained, on-board charging system, this battery-powered material handling device has steel frame construction, differential drive system, variable speed throttle control, and 110 A programmable speed controller. Rugged, multi-surface wheels facilitate mobility.

Kardex Remstar LLC    Westbrook, ME 04092
Feb 13, 2013 Designed for smaller warehouses and stand-alone solutions, Logicontrol 100 basic part locator provides reliable and safe machine control for Shuttle XP VLMs and Megamat RS vertical carousel. Features include numeric keyboard and OPGraphic HMI, available with full color touchscreen operation. Logicontrol 200 adds location management feature. Single control operates up to 3 storage systems and manages up to 1,000 different articles, 8,000 storage locations, and 7 bin sizes.

M&h Plastics Inc    Winchester, VA 22603
Feb 12, 2013 Manufactured in HDPE, Tubulars are available in 250 ml (Ref 5006), 200 ml (Ref 5049), 150 ml (Ref 5048), and 150 ml tottle (Ref 5650) sizes. Contemporary shape is suitable for range of product sectors, and all products are designed to accommodate same flat flip top cap.

Actisafe    Singleton 2330  Australia
Feb 11, 2013 Made of powder-coated heavy-duty steel, Customized Storage Systems can be designed as tall as required. Systems utilize every available horizontal area for shelving, while vertical face is configured to hold items that can be hung in organized fashion. Items can be customized not just for physical layout but also in respect to color coordination so client can maintain corporate color branding if desired. Typical applications include storage of bearings, resistors, capacitors, and actuators.

Nordex AG    Norderstedt   Germany
Feb 11, 2013 Part of Screw Conveyor Package, Right-Angle Helical-Bevel Gears are compatible with CEMA mounting and allow users to install gearboxes in confined spaces. Units produce torque levels up to 42,480 lb-in. and powers up to 30 hp. Using direct coupled gearmotor or NEMA C-face input design, series eliminates need for separate V-belt. Speed reducer housings, constructed of one solid cast-iron piece, contain bearings and seal seats, which eliminates need for splits or bolt-on carriers.

Appleton Mfg. Div., Productive Solutions, Inc.    Neenah, WI 54957
Feb 08, 2013 With its 100,000+ lb capacity, RollMover™ XHD (Extreme Heavy Duty) is able to move such heavy items as truck chassis as well as wire and cable reels. Standard features include reversing capability, rechargeable NiCad battery, and programmable speed controller. Product is also suited for use by paper mill and corrugator customers.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Feb 08, 2013 With its U.N. 11H2 design qualification, P-291 Biohazard Ship Shape™ bulk container safely transports hazardous materials. Reusable unit is rotationally molded in one piece from 100% polyethylene, and design combines rigid plastic container with companion plastic cover and closure that seals materials inside. Able to hold 32 ft³ of material in 44 x 44 in. footprint, container remains closed even if flipped, rotated, or dropped and features permanently molded-in biohazard warning labels.

Hitachi High Technologies, Inc.    Schaumburg, IL 60173-2295
Feb 08, 2013 CoTRO Head, Sigma F8 achieves ultra high-speed One-by-One Pick-up/Placement using 4 direct drive heads per module. Component range starts at 0402s and delivers placement accuracy of 3σ: ±36 µm, with placement optimized by closed loop rotary inspection and on-the-fly component recognition. Via HITACHI LISA line server software tools, all process and component placement data can be stored for access to all users as well as PCB and component traceability and configured with QUATRO Head.