Industrial Magnetics, Inc.    Boyne City, MI 49712
Jun 10, 2009 Available as adaptor to Manhole Cover Lift Dolly, MCLLEG comes with easy to turn manual worm gear winch and long lifting strap with hook on stabilizing leg that attaches to dolly. Unit is constructed with corrosion resistant materials and heavy duty wheels for stability. Retractable handle is available with 3 angle positions of 90°, 105° and 120°.

Newport Corp.    Irvine, CA 92606
Jun 09, 2009 To optimize safety, ergonomics, and space efficiency, SmartTable® OTS(TM) is available with shelving and support rails. All accessories attach directly to table frame for system mobility. Shelving products expand storage space in lab, allowing researchers to remove non-essential items from table. Functioning as bumper guard for vibration-isolated table, Hip Bar lets users lean into experiment to adjust table components.

ESS Technologies, Inc.    Blacksburg, VA 24060
Jun 09, 2009 Requiring 17 ft 1 in. x 7 ft 7 in. area, system integrates Bergami Model K 15 Horizontal Case Packer capable of packing up to 15 cases/min with ESS Robotic Mini Palletizer Cell, which handles up to 30 cases/min. K 15 case discharge conveyor integrates directly into infeed of ESS Robotic Mini Palletizer Cell, where FANUC robot with vacuum or gripper style end-of-arm tooling picks one or more cases from conveyor and places them on pallet in pre-programmed pattern.

Ryson International, Inc.    Yorktown, VA 23692
Jun 09, 2009 Shipped in one piece to accelerate and facilitate installation, Ryson High Capacity Spirals require one drive motor and come in models with 16 or 24 in. wide slats. Load capacity is 75 lb per linear foot of conveyor, and total weight capacity in spiral at any one time is 3,200 lb. Able to achieve speeds to 200 fpm, these chain slat conveyors incorporate low-friction design for low noise, smooth operation, and extended life. Modular design allows in-field customization.

Ryson International, Inc.    Yorktown, VA 23692
Jun 09, 2009 Available with dual 8, 12, 16, or 20 in. wide slats, Dual Track Spiral Conveyors require one drive motor for each track. Both tracks can go up or down, and can optionally be reversible. All modular chain slat type conveyors incorporate low-friction design, which facilitates smooth operation with minimal noise. All bearings are sealed for life and do not need further lubrication.

U.S. Automation Incorporated    Brookfield, WI 53045
Jun 09, 2009 Self contained Microstage 28(TM) incorporates preloaded linear rail, precision anti-backlash rolled leadscrew, high performance coupling, and motor mounting provisions. It mates with NEMA size 11 motors and offers travel lengths from 10-205 mm. Multi-axis configurations, such as XY, XZ, and XYZ are available with standard series of mounting brackets. Customizable unit suits medical, lab automation, photonics, inspection equipment, pick-and-place, and test equipment applications.

Gluefast Co., Inc.    Neptune, NJ 07753
Jun 09, 2009 Featuring heated glue tray and temperature control device, 14 in. Captain B AG Gluer is suited for binderies using animal glues for book covers. Heating system is solid-state controlled with temperature strip located on glue tray. Roller widths up to 42 in. are available for cold and hot glues.

LaCie USA    Hillsboro, OR 97124
Jun 08, 2009 For lightweight protection and mobility, LaCie Cover protects HDD surface against scratches. Internal pocket is provided for cables/accessories. Also available, LaCie Coat features reversible design and hidden pocket for cable/accessory storage. For more robust protection, LaCie Cozy is made of EVA and has rigid exterior to withstand everyday impacts. Internal liner of memory foam protects HDD from shocks and jolts, while flexible outside pocket accommodates peripherals and supplies.

Ghent Manufacturing, Inc.    Lebanon, OH 45036
Jun 04, 2009 Suited for displaying achievements, fine artistry, or valuables, Waddell Visions Series combines 4 clear, full-length tempered glass side walls and 3 clear, ¼ in. thick 14 7/16 in. x 14 7/16 in. tempered glass shelves with powder-coated metal frames. Each case stands 73 in. high with 17 ¼ in. width and 17 ¼ in. depth. All include Xenon puck spotlight with on/off switch, key locking door, and 4 adjustable feet for leveling.

Plastic Technologies, Inc.    Holland, OH 43528
Jun 03, 2009 Lightweight foamed polyethylene (PET) bottle/jar blow molding process, oPTI^SM, provides food/beverage brand owners with range of container aesthetics and performance capabilities. White or silvery colored bottles can be made without additives that would limit package recycling, and various other colors are supported as well. Surface has unique feel while providing tactile traction, and barrier characteristics can reduce transmitted light by up to 95%.

Allegro Industries    Garden Grove, CA 92841-1410
Jun 03, 2009 Measuring 21 x 14 x 10 in., 10 lb Hi-Viz Heavy Duty Emergency Respirator Wall Case holds up to two 5 or 10 min EBAs and is made of LLDPE. It is hi-viz green in color and features window for equipment visibility. Offered as 32 x 17 x 14 in. Single or 32 x 34 x 14 in. Dual Unit models with 2 and 4 viewing windows, respectively, Hi-Viz Heavy Duty SCBA Wall Cases are also hi-viz green in color and made from roto-molded LLDPE. Both versions accommodate tamper-evident strips.

Martin Engineering    Neponset, IL 61345 9766
Jun 03, 2009 Featuring no flat surfaces on which dust can accumulate, EVO(TM) Modern Conveyor Architecture System consists of engineered components designed to be combined into belt conveyor system. Load Zone component is currently available; it and future components can be installed individually or in combination to construct each zone. Suited for new construction as well as retrofit applications, upgradeable system exceeds safety, environmental, and design codes/regulations.

Fluid Research Corp.    Tustin, CA 92780
Jun 03, 2009 Designed for Advantage(TM) Dispensing System, AdShot provides feedback from controller to pump motors. Should controller sense feedback that is not consistent, dispense will immediately shut down and notify operator. TopShot, designed for Signature(TM) systems, offers continuous feedback for all aspects of meter, mix, and dispense. Automatic continuous data logging of process conditions records data for baseline and changing component efficiency comparisons, and need for shut-down or maintenance.

MBX Systems    Wauconda, IL 60084
Jun 03, 2009 Fully-configured server racks can be implemented in multiple units that can be configured jointly and powered together. System and configuration data and location are provided on each unit in rack and redundancy is built in at all levels. Additional components, such as switches and power distribution units, can be integrated. Units can also be designed to comply with country-level certification requirements for global deployment.

Aero Tec Laboratories, Inc. (ATL)    Ramsey, NJ 07446
Jun 03, 2009 Compatible with range of fuels, FluoroCell Flex-Tank exhibits shock and impact immunity as well as scuff, cut, and abrasion resistance. There are no extractables such as gum residue or plasticizers, and safety foam baffling reduces fuel aeration, suppresses explosion, and enhances stability by reducing fuel slosh and surge. Tolerating continuous temperatures of 250°F, with extremes to 350°F, pliable and fully deformable tank is self-supporting in container or cavity.

Air Technical Industries    Mentor, OH 44060
Jun 03, 2009 Featuring built-in crane lift and auxiliary power unit, battery-powered Scorpion Aircraft Tug enables fixed base operator aircraft mechanics to move and precisely position aircraft weighing up to 15,000 lb. Built-in crane folds out of base and offers 7 ft telescopic boom with lift-arm capacity up to 1,000 lb. For safety, Scorpion includes amber running light, headlights for nighttime operation, and onboard fire extinguisher.

K-Tool International    Wixom, MI 48393
Jun 01, 2009 Available in 5 colors, 4 drawer utility carts have 2 gas struts in top storage tray for opening and closing, one-handed drawer locks that operate only when top lid is closed, and additional side storage tray for taller items, such as aerosol cans. They also include top-locking tray, large bottom storage tray for oversized items, 22-slot screwdriver/prybar holder and steel ball bearing slides for quiet operation.

FIPA, Inc.    Atlanta, GA 30318
Jun 01, 2009 Fitted with permanent magnets, magnetic grippers provide secure handling of heavy work-pieces even without vacuum cups. IP65 rated unit has maximum operating temperature of +80°C and does not allow any work-pieces to fall, even during power failure. When they are energized, reverse polarity cut-off coil neutralizes magnetic field and unit releases work-piece at desired location. Adapters are available for thread sizes G1/8 and G1/4.

Haas Automation, Inc.    Oxnard, CA 93030
May 28, 2009 Designed to mount in Y direction of mid-size VMC, TR160Y dual-axis trunnion rotary table measures less than 25 in. wide and 20 in. deep, and fits on one end of machine's table. It has 160 mm T-slot platter, and will swing parts up to 7.5 in. dia. Trunnion provides ±120° of tilt and 360° of rotation for full simultaneous 5-axis motion, or to position parts to any angle. Powerful brushless servomotors on both axes of TR160Y provide 150 ft-lb of torque on A axis and 100 ft-lb of torque on B axis.

Proper Storage Systems, Inc.    Seguin, TX 78155
May 28, 2009 Available with depth of 30 in. and widths of 48 and 96 in., roll-out shelves come with 10 sets of adjustable blocking to accommodate any width dies. Adjustable on 1 in. centers, units have either 3 or 4 roll-out shelves with 7 or 11 in. of clear space between shelves. Each roll-out shelf has 1,500 lb capacity, and is equipped with automatic safety interlock that locks all other shelves in when one is rolled out.