Material Handling & Storage

Material Handling & Storage

Fluid Dispenser ensures critical deposit control.

Nov 08, 2001

Model 2000XL applies adhesives, epoxies and assembly fluids in amounts as small as 0.006 in. dia. It uses microprocessor circuitry to control amount of fluid applied. Teach function helps user determine correct amount of fluid to use for specific applications. Digital displays of all dispensing parameters provide process control. Up to 8 different deposit amounts can be stored in non-volatile... Read More

Controls & Controllers, Material Handling & Storage

Control Valves are used with air, intert gas or vacuum.

Nov 08, 2001

MicroKing 4-Way Air Control Valves are direct acting units designed to control actuators, pilot other valves, and for blow off and dispensing applications. They are available as inline or subbase versions offering M5 or 1/8 in. ports with flow of 0.18 Cv and 4.8 W solenoid. Valves feature built-in flow controls and choice of IEM or Subbase Bar manifolds with side or bottom porting, as well as... Read More

Material Handling & Storage

Bulk Container accommodates double blade mixers.

Nov 08, 2001

All-plastic intermediate bulk container accommodates double blade mixers for mixing multiple ingredients and raw materials. It enables food, chemical and other processors to mix and blend inside bulk container, eliminating need to mix in processing vessel and transfer to another container for shipping. It handles products with up to 1.5 specific gravity, stacks 2-high when full and 3-high when... Read More

Material Handling & Storage

Inventory Management System suits tank and silo inventory.

Nov 08, 2001

Mark III Yo-Yo® Inventory Management System provides accurate and reliable inventory management information for tanks and silos. Mark III is FM-approved and rated for use in hazardous environments. Its sensor is housed in explosion-proof polyester-coated, cast aluminum housing. It may be interfaced to computer, PLC, or Bindicator solid state readout. Bindicator readout displays levels to... Read More

Material Handling & Storage, Packaging Products & Equipment

Solder Dispenser ensures even solder mix.

Nov 08, 2001

Programmable LDS9000 bench top solder paste dispensing system eliminates tunneling, paste separation and waste. It has a hand-held gun with mechanically driven lead screw that gently and precisely pushes the solder mix through an industry-standard plastic syringe and tip. Linear actuator, which is under software control, moves plunger in syringe without crushing paste. It draws paste back at end... Read More

Material Handling & Storage

Reels stay together and keep products safe from damage.

Nov 08, 2001

Dead Bolt reels feature stay-tight bolt assembly for safety. They are available in variety of sizes to accommodate nearly any type material, and come fully assembled or ready for assembly. Reels have tapered start holes and multiple tie-off holes to reduce material waste, and are available with optional water resistant cores. They can be stacked, making transport, material handling and storage... Read More

Material Handling & Storage, Portable Tools, Safety & Security Equipment

Tool Lanyards comply with OSHA guidelines.

Nov 08, 2001

Miller® Bandit(TM) Tool Holder and Miller WristBandit Tool Holder prevent workers from dropping tools at heights. Miller Bandit Lanyard Tool Holder attaches to workers' waist belts while allowing freedom of movement. It is constructed of stretchable cord surrounded by nylon tubular webbing, and stretches from 26 to 43 in. Miller WristBandit Tool Holder attaches to workers' wrists using Velcro.... Read More

Material Handling & Storage

Bulk Wire Container features octagonal shape.

Nov 08, 2001

Marathon Pac(TM) corrugated structures are 100% recyclable and easily collapsed by hand. They require only wire conduit attachment bracket and conduit connector. Enclosed packaging with moisture barrier protects wire from dust, spray and splash. Spoolarc MIG wire is spooled into carton, eliminating cast and helix as wire exits from welding gun. Containers are available in range of wire sizes and... Read More

Material Handling & Storage

Vacuum Pumps are used for pick and place applications.

Nov 06, 2001

Fastbreak pre-assembled high speed blow-off vacuum pumps, levelers and cups are suitable for applications that require accurate part placement of irregularly shaped objects and/or rapid part release in dusty/dirty environments. Blow-off action continuously self-cleans vacuum lines to ensure positive release into nesting fixture for safe placement of parts. Applications include metal stamping,... Read More

Material Handling & Storage

Electric High Lift is available in 2 models.

Nov 06, 2001

Maxx-Jack Electric High Lift is capable of lifting skids, plastic pallets, wire baskets and containers with open bottoms. Unit includes 12 Volt electrical system with battery and charger. Push button lift and lower control is located in handle, and magnetic backed remote lift/lower control with 6 ft. cord is optional. Electric High Lift, with 2,200 lb capacity, includes automatic floor lock. Read More

Material Handling & Storage

Conveyors provide single solution for multiple applications.

Nov 06, 2001

Zig-Zag® Overhead Enclosed Chain Conveyors allow manufacturing and distribution centers to combine carton, tote distribution, and trash handling in one conveyor system that can integrate with existing floor conveyor systems. They automate manual functions and provide safer working environment. Read More

Material Handling & Storage

Scissor Lift is for low volume paint operations.

Nov 06, 2001

Self-propelled, curved rail guided scissor lift can access both sides and ends of product as it travels on floor guide rail. This pneumatic/hydraulic powered personnel lift travels from lowered platform height of 31 ft to maximum raised operator platform height of 144 ft. Its 30 x 66 ft operator platform features 500 lb capacity. Unit can be rolled off guide rail and used as stationary scissor... Read More

Material Handling & Storage

Smart Lift floats loads in assembly systems.

Nov 06, 2001

Computer-controlled iLift(TM) lifting and balancing system for assembly and material handling lets operators apply 2 lb of physical force to move 150-lb load at speeds up to 4.9 ft/sec. Float mode allows direct movement of loads without need to push buttons from central control position, thus shaving seconds from cycle times. In-line slide handle eliminates vertical overtravel. Lift can be... Read More

Material Handling & Storage

Stackers offer capacities to 4000 lbs.

Nov 06, 2001

Series W heavy-duty walkie stackers provide lift heights to 154 in. and operate from 24 volt electrical system. Comfortable dual twist grip controls forward and reverse travel. Buttons for raise, lower, and horn are located in center of handle for easy access. Button at end of handle reverses truck's travel direction away from operator should he/she come in contact with it. Speed cutout switch... Read More

Material Handling & Storage, Mounting & Attaching Products

Table Index Drive features modified sine motion.

Nov 05, 2001

3400 Series Dial Table Index Drive Package is a rotary dial indexer that is offered with an array of standard motions. Package includes indexer, worm drive reducer, 1/3 hp dc motor and controller, and cam and limit switch assembly for cycle-on-demand capability. Unit features 1.75 in. dia center through-hole for power or signal apparatus, as well as variable speed controller. Accessories include... Read More

Material Handling & Storage

Screw Conveyor allows auger changeovers in minutes.

Nov 05, 2001

Single person can easily handle washdowns, servicing, and auger changeovers of portable High/Low Mobile Helix conveyor in minutes. Total dismantle time is 5 min or less, without special tools. Conveyor ranges in size from 2-8 in. dia, can convey at rates up to 25 CFM, and is used in food, chemical, and pharmaceutical industries worldwide. Electric actuator raises and lowers conveyor, allowing it... Read More

Material Handling & Storage

Controller provides consistent repetitive dispensing.

Nov 01, 2001

Pneumatic Model Z620 controller, with z-axis motion, dispenses liquid to controlled height for filling and potting applications in automated lines and conveyor-fed stations. Unit is attached to Model DSP501A dispenser which controls dispense time and air pressure. Adjustable-height dispenser, secured to vertical stainless-steel rod, may be angled. Stroke adjustment is from 0.20 to 2.00 in.... Read More

Machinery & Machining Tools, Material Handling & Storage

Abrasive Wheels provide aggressive cutting.

Nov 01, 2001

Cyclone Flap Wheels, made with aluminum oxide abrasive resin cloth, are available in stem-mounted and unmounted versions. Stem-mounted wheels are used in manual operations on portable tools and provide consistent aggressive action in hard-to-reach areas. Unmounted wheels are used on bench grinders and provide controlled grinding, finishing and deburring action on machined parts and flat surfaces.... Read More