Flexicon Corporation    Bethlehem, PA 18020 8006
Sep 16, 2010 Pre-engineered and pre-wired, Bag Dump System collects dust generated during manual dumping and compaction of bags, and conveys bulk material downstream. System integrates receiving hopper, dust collector, bag compactor, and fully enclosed flexible screw conveyor, which handles free- and non-free-flowing bulk materials. Entire system is available mounted on frames with boom and casters, and is constructed of stainless steel finished to food, dairy, pharmaceutical, or industrial standards.

Super Micro Computer, Inc.    San Jose, CA 95131
Sep 16, 2010 Equipped to support high-density server, storage, and blade systems, 42U SuperRack(TM) features fully welded construction that offers static load capacity of 5,000 lb for data center, high-performance computing (HPC), and server farm applications. Clean cable routing promotes optimal airflow, while also facilitating installation and providing obstruction-free rear access for hot-swap devices. Available flexible accessory options include front, rear, and side expansion units.

Master Magnetics, Inc    Castle Rock, CO 80104
Sep 16, 2010 Available in 4 models with flat piece lifting capacity of 220, 660, 1,300, and 2,200 lb, Neodymium Lift Magnets are suitable for handling steel plate, forgings, and die castings in machine shops, warehouses, and industrial processing plants. Magnets eliminate need for slings or clamping devices and utilize On/Off release lever with safety lock to engage and disengage material. For safety, actual breakaway force is 3.5 times greater than maximum lift rating.

Jorgensen Conveyors, Inc.    Mequon, WI 53092 4611
Sep 15, 2010 Offered in 30, 60 and 90 gpm flow rate capacities and 4 tank sizes, Gravity Roll Media Filters use deep filter cakes for optimal performance in grinding and metal cutting machining operations where very fine chips are generated. Seal wheel provides positive seal of filter media, ensuring no fine particulate migrates around paper and into clean tank. To meet different coolant volume capacity requirements, 60 and 90 gpm filters can be mounted interchangeably on any of 3 tank sizes.

TeleTracking Technologies Inc.    Pittsburgh, PA 15222
Sep 15, 2010 Part of distributed sensor-network system that utilizes intelligent Real Time Location System tags for continuous communication, RTLS Plug-In Readers are placed throughout hospital to report location, status, contextual awareness, and environmental conditions regarding medical devices and people. Tamper-resistant readers feature shutter system that prevents patients from inserting objects into slots containing energized contacts, complying with NEC safety standards.

Crown Equipment Corp.    New Bremen, OH 45869
Sep 15, 2010 Available in capacities from 4,000-6,500 lb, Crown C-5 Series Class V Forklift is equipped with 2.5 L John Deere Power Systems engine, self-adjusting power brake, and solid pneumatic tires that negotiate uneven surfaces. Dual open-core radiator offers independent engine and transmission cooling, while ergonomically designed Crown FlexSeat(TM) alleviates common operator pressure points. Based on steel frame, forklift handles rough terrain and heavy loads such as lumber, stone, and clay.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 14, 2010 Decorative cases feature UL 94 V-0 rated plastic covers and slip resistant feet or seals, enabling use as table, desk, or hand-held case. Units include guide slots for PCBs, conductive surfaces and seals which ensure EM compatibility, and various IP classes of protection. They can also be specified with finely ground or precisely milled surfaces, scratch- and abrasion resistant Nextel(TM) lacquer coatings, and aluminum profiles and sheets labeled using laser or screen printing.

GFG    Sussex, WI 53089
Sep 14, 2010 Measuring 43 in. to top of roll and 53 in. to top of guard, GFG LOW PROFILE is intened for forward and reverse application of coatings such as anti-finger print, chromate, phosphate, and paint. Design facilitates installation in tight places as well as viewing of roll surfaces and nips during operation. It also eliminates need for large holding tanks, reducing chromates and other environmental waste. Coater handles roll combinations up to 14 in. applicators and 12 in. pickups.

Totech America Corp    Las Vegas, NV 89123
Sep 14, 2010 Exceed challenges of IPC J-STS-033B.1 for handling of Moisture Sensitive Devices, MSD 1200 Series incorporates modular enclosure and dry unit with closed-loop, on-demand regeneration. Integrated U5001 Dynamic Series Zeolite dryers deliver dehumidification capabilities that enable basic MSD1212 to take 240 sec to move from 50% RH to less than 5% under unloaded conditions at 25°C. Additionally, units regenerate only when necessary and take less than 10 min to do so.

Flexible Steel Lacing Co.    Downers Grove, IL 60515-4200
Sep 14, 2010 Available for belts up to 5/16 in. thick, SmartClamp(TM) system promotes safety when clamping belts for installation of Clipper® and Alligator® mechanical belt fasteners. Impact plate dimensions optimize striking surface, setup procedure conserves time during breakdown situation, and beveled edges of housing facilitate belt engagement. Lack of sharp corners and edges provides smooth transition from clamp to belt, while ribbed lower wedge and grooved housing provide additional holding strength.

Tci Automotive    Ashland, MS 38603
Sep 14, 2010 Designed for Powerglide transmissions, TCI® Die Cast Deep Aluminum Pan incorporates heat dissipating inverted dimples that increase surface area inside pan and pull heat toward exterior of pan, ultimately lowering temperature of fluid. On outside of pan, exterior fins are slightly angled to create funnel effect, which maximizes air speed across surface. Pan has lightweight construction and features O-ring design that replaces conventional gasket, eliminating leaks.

Mazak Corp.    Florence, KY 41042 3092
Sep 13, 2010 Designed for integration with Mazak machines, MX Hybrid Roller Guide System features X-Design, which distributes load in 4 directions - radial clockwise and counterclockwise, reverse radial, and lateral. X-Design also minimizes reversal errors for optimal cornering. In addition to consuming minimal amounts of oil for Greener operation, system provides vibration dampening capability, which extends tool life.

Littelfuse, Inc.    Des Plaines, IL 60016
Sep 13, 2010 Available in standardized case size that meets UL Class H Dimensions, SPFR Series 1000 Vdc Solar Fuses comes in 250, 300, 350, and 400 A ratings. RoHS-compliant units also meet European system and North American utility scale requirements. SPFRHD Series 1000 Vdc Solar Fuseholder with lug termination is available to accommodate SPFR 1000 VDC Series Fuses. Both are UL-recognized to 1,000 V.

Komatsu America Corp.    Rolling Meadows, IL 60008
Sep 10, 2010 Intended for mining applications, EPA Tier 2 emissions-compliant WA1200-6 is powered by Komatsu SAADA16V160E-2 engine that delivers 1,892 hp (gross) and 1,765 hp (net) at 1,800 rpm. Operating weight is 477,100 lb, and use of electronic governor reduces fuel consumption. In addition to dual-mode active working hydraulic system, features include engine RPM control system with auto deceleration, variable transmission cut-off system, and torque converter cooler.

Zierick Manufacturing Corp.    Mount Kisco, NY 10549
Sep 10, 2010 Used for automated feeding of headers, microprocessor-controlled feeder is designed to mount on various flex cell placement systems with mechanical or vacuum adapter. It accommodates pin lengths from ¼-1 in. in 1/8 in. increments, and capacity accommodates 24 in. of header strips. New strips can be loaded on rear of feeder at any time, and sensors on cylinders provide feedback to microprocessor for control purposes. Max feeder size is 27 in. x 3.4 or 2.85 in. wide x 8 in.

GFG    Sussex, WI 53089
Sep 10, 2010 Compatible with GFG Series 35, 45, or 55 coaters, Generation V Coating Head Control System offers coil coaters alternative to conventional roll coaters. System provides computer-controlled roll positioning, allowing for repeatable coater setups and continuous feedback monitoring. Coating roll motions may be controlled from HMI or from local push button control stations located at coater machine.

Kardex Remstar LLC    Westbrook, ME 04092
Sep 09, 2010 To optimize inventory management, Controls 3000 provides transaction visualization using graphic HMI, which offers drop-down menus, 5.7 in. color display, ¼ VGA with full graphics capability, and numeric membrane keyboard with functional and navigation keys. Supervisors can set retrieval speed, flow of speed, and operator specific accessibility to individual trays. By setting speed parameters, sensitive or unstable products can be handled in same system as other materials.

Videx, Inc.    Corvallis, OR 97330
Sep 09, 2010 CyberKey Vault Single Electronic Key Cabinet contains one electronic key that can only be released when RFID card is presented. When released, key contains access permissions specific to information encoded on RFID card, enabling workers to open locks specific to their place- and time-specific duties. When key is returned, administrator receives feedback of when electronic key was released and what locks key opened. Email notification is sent if someone forgets to return key.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 08, 2010 Combination cases manufactured with profiled aluminum can be combined with one another as well as with modules of other profiles to form tube. Front panel is fastened using screw and guide slots integrated in profile allow insertion of 160 mm Euro cards. Versions with EMC and IP protection incorporate flat seals between cover plates and case and by cord packing between profile halves.

OKW Enclosures, Inc    Bridgeville, PA 15017
Sep 08, 2010 Featuring all-aluminum design for RFI/EMI protection, TEKAM Enclosures each consist of extruded case body with internal guide rails for PCBs and 2 die cast end panels that are assembled by self-tapping screws. Customers can specify cases with flat end panels for handheld or portable use, or end panels with integrated wall mounting ears. Available in 9 sizes from 2.75 x 2.36 x 1.22 to 6.89 x 4.17 x 1.81 in., cases include 2 molded rubber gaskets for sealing.