Arena Products, Inc.    Rochester, NY 14615
Feb 09, 2010 When used with Arena Air-Evac® Starfish(TM) Liner, Starfish Lift enables safe raising and lowering of top-discharge, positive-displacement pumps or mixers in and out of A330 Shipper(TM) for efficient discharge of viscous products. Remote control pendent allows one operator to lower and raise pump while guiding throat of pump into or out of top fitment of liner. Powered by 24 Vdc rechargeable battery, ergonomic unit has 66.6 in. lift height and 60 lb lift capacity (with extension boom).

Schunk    Morrisville, NC 27560
Feb 08, 2010 Size 380 PZN-plus 3-finger centric gripper features multitooth guidance that offers large gripping force and high moment load capabilities. Device allows grip forces up to 13,400 lbf as well stroke of nearly 2 in./jaw. Product is also available in different versions for universal use in areas with specific temperature, chemical, and dirt requirements. Metallic dust covers and viton seals are available as options.

Vaccon Co., Inc.    Medway, MA 02053
Feb 08, 2010 Interchangeable cartridge is removed from body of Mid-Series single-stage venturi pumps by pushing it out of air supply port and reinserting new one. Straight-thru design of nozzle and diffuser allows debris to pass through cartridge assembly without clogging, enabling maintenance-free pump with no moving parts. Cartridges are color-coded and grooved based on performance characteristics. They are manufactured with anodized aluminum and operate at 80 psi.

Pro-Link, Inc    Canton, MA 02021
Feb 08, 2010 Featuring locking cover that protects tissue while preventing tampering and pilferage, Elite vertical 2-roll tissue dispenser has vertical design that allows it to fit comfortably where horizontal space is consideration. It comes in variety of translucent color choices, including red, green, blue, and white, to match any restroom decor.

Keller Products, Inc.    Lexington, MA 02420-0001
Feb 08, 2010 Permitting pre-scheduled, untended operation of any compressed air-driven equipment, timer ball valve opens and closes compressed air line for selected duration on programmable schedule. Quartz controlled timer permits multiple cycles each day. Unit is supplied with 115 V cord and plug, and one 1 in. NPT ball valve for compressed air.

Elma Electronic Inc.    Fremont, CA 94538
Feb 08, 2010 Designed for transport of electronic systems in rugged environments, IP65 rated transit rack cases feature rotomolded case with stainless steel 19 in. rack frame supported on anti-vibration mounts. They are compliant to MIL-STD 810F and handle temperatures from -40 to +158°F. Inner frame is adjustable to meet front panel, rear wiring, or connector spacing needs. Other features include ergonomic injection-molded carrying handles, optional cooling units, and wide range of accessories.

EXTRUSION DIES INDUSTRIES    Chippewa Falls, WI 54729-1443
Feb 05, 2010 Designed for extruded polystyrene foam board, Die System enables on-the-fly product changeovers without stopping production line. System features adjustable full-manifold internal deckle inside flow channel of die and external edge restrictors that create final side dimensions on board as it emerges from forming box. Located between extruder and die, purge block makes it possible to carry out die maintenance while extruder is shut down but still full of polymer.

Tharo Systems Inc.    Brunswick, OH 44212 0798
Feb 04, 2010 Using H-Series direct thermal or thermal transfer printers with print resolutions of 203 or 300 dpi, Model PA1200fa prints and applies labels to leading edge of product moving down conveyor. After label is printed, it is stripped from liner and held by suction on applicator tamp pad, which is mounted on swing arm that extends over conveyor and tamps label to product. Labels sizes can range from 3 x 1 in. up to 4.5 x 8 in.

Greif    Delaware, OH 43015
Feb 04, 2010 Designed for home and office delivery market, reusable water bottles are made of FDA compliant bisphenol-A (BPA)-free copolyester. Bottles are available in standard 3 and 5 gal round and handled sizes. Independent laboratory testing using Comprehensive Bottled Water (50 State Compliance) Tests demonstrated that all parameters are below maximum contaminant level.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Feb 03, 2010 Available with internal 12/24 V battery charger and jump starter, Trailblazer® 302 Air Pak(TM) welds at up to 350 A, and provides 13,000 W of Accu-Rated(TM) generator power, 26 cfm compressed air, and 450 A of battery jumping power. Charger delivers power until it senses load from starter to eliminate battery failure. Driven by 30 hp Kohler gas engine, 59½ x 20 x 34¼ in. welder provides Stick, MIG, flux cored, AC/DC TIG, and air carbon gouging and cutting.

Hardinge Workholding Division    Elmira, NY 14902
Feb 03, 2010 Available with optional pneumatic collet closer, Model GD160LP features hardened steel worm and gear, with double eccentric design offering fine gear mesh. Table's 5C A2-4 spindle allows customer to use existing 5C spindle tooling without adaptors. Clamp/brake system is fast and clamp release is in milliseconds.

Elma Electronic Inc.    Fremont, CA 94538
Feb 03, 2010 Compliant to AMC/MicroTCA specifications, customizable Advanced Mezzanine Card handles have grooves for easy handling and positive detents at 3 distinct positions. Die-cast constructed units are offerd with optional micro-switch that fits all locations listed in MicroTCA.0 specification, as well as optional LED indicator light guide with die-cast zinc bright chromate faceplate that provides strength and durability.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Feb 02, 2010 Featuring 3000 rpm max recommended speed, Modified Model 425 Air Chuck has 3-jaw design with 645 lb force per jaw, max jaw opening of 0.250 in., and repeatability of 0.0001 in. TIR. Work piece is loaded into chuck sprocket side down, and sprocket face is used for axial location. Locator provides radial spring pins to orient workpiece at 45.648° angle, while hardened and ground top jaws grip 43.3 mm ID towards top of workpiece.

Pierce Arrow, Inc.    Henrietta, TX 76365
Feb 02, 2010 Self recovery winches include compact solenoid assembly mounted above motor for efficient operation as well as for access to internal parts. With heavy-duty motors that offer high ampere resistance and output strength, winches are suitable for heavy-duty machinery requirements in off-road industry.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Feb 01, 2010 Industrial grade flying lead cord/cable reels ship with bare cord/cable endings and conduit box so that they may be hard wired and any number of ending options may be added. Cord ending is stripped of its jacket and conduit box grants easy access to leads when wiring, and cam latching system is resistant to wear.

Flexicon Corporation    Bethlehem, PA 18020 8006
Feb 01, 2010 Featuring 2 hydraulic rams with contoured end plates that press opposite sides of bulk bags, stainless steel sanitary bulk bag conditioner loosens material solidified during storage and shipment, facilitating discharge through bag spouts. Measuring 87 x 133 x 78 in., unit is fully enclosed on all 4 sides for operator safety. Optional hydraulically-actuated, variable-height turntable allows conditioning of bag at all heights on all sides.

Demag Cranes & Components Corp.    Oakville, ON L6M3E3
Jan 29, 2010 Respectively intended for handling 3.2, 6.3, and 12.5 ton loads, DR 3, 5, and 10 universal foot-mounted hoists can be adapted to meet application requirements. Attachment points enable suspension in 4 mounting positions to ensure free rope lead-off in all directions. Load bar operation can also be implemented using 2 synchronized ropes. Depending on model, hoists offer 15 or 20 m hook path and 8-12.5 m/min hoist speed.

Demag Cranes & Components Corp.    Oakville, ON L6M3E3
Jan 29, 2010 Demag FDR 20 foot-mounted hoist, The Workhorse, features reeving components fitted to unit, with 2/1, 4/1, or 4/2 reeving arrangements depending on application. Compact device supports flexible mounting arrangements due to multiple connection options and has 1 rope guide for all rope lead-off variations. It includes modular electrical equipment, lubricated gearbox, and low-vibration motor. Controlled via cable connection or by radio, hoist also includes overload protection.

Demag Cranes & Components Corp.    Oakville, ON L6M3E3
Jan 29, 2010 Optimized for crane applications, EKDR Rope Hoist is equipped with fast acting brake, lubricated-for-life gearbox, protective rope guide, and precision geared limit switch. Electrics feature CAN bus technology, while frequency inverter enables stepless travel motions. Double-rail crab and foot hoist additionally includes overload protection, user-friendly bottom block, and ergonomic controls.

FleetwoodGoldcoWyard    Romeoville, IL 60446
Jan 29, 2010 Modular and configurable to suit different layouts, Robotic Tray System (RTS) provides buffering and accumulation system within can end manufacturing processes. It can run trays from existing balancer systems, and optional servo belt drives eliminate air usage by replacing pneumatic cylinders. Acting as one unit, system is comprised of 4 separate systems: infeed lanes, robot end-of-arm tooling, discharge lanes with shuttle, and discharge conveyors.