Proper Storage Systems, Inc.    Seguin, TX 78155
Mar 01, 2011 With Full Extension Pneumatic Roll-Out Shelving Racks, users can store and access heavy tooling and materials. Units offer shelf widths from 36-66 in. and shelf depths of 36 or 48 in. in 2-, 3-, and 4-shelf models. Automatic safety interlock locks in all other shelves when one shelf is extended. Shipped fully assembled, racks include all necessary anchors.

Labjacks.com    Buffalo Grove, IL 60089
Mar 01, 2011 Designed for industrial and laboratory applications, Xtreme-Z Lab Jacks come in 4 models with lift heights from 4.5-12 in. All are stable under minimum or maximum load, with ±.015 in. deflection over full range of movement. Largest model offers respective dynamic and static weight capacities of 150 and 250 lb. All models feature adjustment handle that is removable and machined to accept powered movement. Mounting top and bottom plates are standard and metric grids, respectively.

Stakrak Ltd    West Sussex RH11 9SH  United Kingdom
Feb 28, 2011 Used in lean, JIT (just-in-time) manufacturing and concession stockholding environments, Kanban side storage racking system facilitates storage of components at point-of-use on production line. It can be adapted and modified to fit requirements and is suited for smaller components such as fasteners and fixings. Options include all-metal shelves with plastic bins, or racks with particle board decks and plastic bins. Dual-bin arrangement simplifies stock rotation and replacement.

Key Technology, Inc.    Walla Walla, WA 99362
Feb 28, 2011 Using close-coupled high-speed ejector system made up of 256 air jets spaced 6 mm apart, G6 Tegra® sorters remove foreign material and product defects from acceptable product stream. Auto Valve Check feature, by automating routine testing of ejection system valves, enables food processors to detect potential problems and take appropriate corrective action so sorter operates at peak performance. Check can be initiated by operator or OPC command from network and takes 10-25 min.

Nu-Star, Inc.    Shakopee, MN 55379
Feb 28, 2011 Built with transaxle design that enables smooth operation on uneven surfaces, pedestrian-operated Super Power Pusher® allows one person to push, pull, and maneuver wheeled loads of up to 150,000 lb up 5% grade. Ergonomic handle encircles hands for protection and provides fingertip speed control as well as built-in belly kill switch. Anti-runaway pusher also features automatic braking and programmable control system for setting accel/decel limits.

Liberty Industries    East Berlin, CT 06023
Feb 28, 2011 Available in 304 or 316 stainless steel with glass, clear plastic, or opaque panels, Model VSW is 2 ¼ in. deep and comes in custom widths and heights. Manually operated, vertical sliding pass thru window is held open by counterbalances tuned to window weight. System is designed for moving production amounts of material from one area to another, which may or may not be restricted, without need to swing open door or to push product through curtains.

O.BERK Co.    Union, NJ 07083
Feb 25, 2011 Designed to deliver precise drop or dose, Amber Glass Dropper Bottles prevent spillage and excess product usage. Available sizes include 5, 10, 15, 20, 30, 50, and 100 mL as well as 10 mL Tall, all with 18 mm neck finishes. Closure options include tamper-evident break-away band, available in screw cap with dropper insert, and child-resistant closures with tamper evident break-away bands and fitments. Non-tamper evident caps with fitments are also available.

ESS Technologies, Inc.    Blacksburg, VA 24060
Feb 25, 2011 TaskMate(TM) Flexible Feeding System includes high-speed FANUC multi-axis robot with end-of-arm tool and impulse-based flexible feeder. Feeder flips or recirculates parts into robot's pick zone, which uses FANUC iRVision system to locate and pick part regardless of orientation on feeder. Able to be programmed to handle many product configurations, system integrates with other packaging machinery for variety of applications and can be used with various FANUC robot models.

Hasco    Arden, NC 28704
Feb 25, 2011 Cylindrical air valve Z4912/... installs with press fit of assembly into H6-tolerance hole, which allows rapid installation into cavity. Parts in contact with plastic are manufactured with stainless steel. Available in sizes of 8, 12, and 16 mm dia, valve is also offered in 6 mm dia version to allow ventilation of small cavity areas and minimize markings on part surface. It is suited for blowing air into mold and removing vacuum effects during mold opening or ejection.

Schneider Packaging Equipment Co., Inc.    Brewerton, NY 13029 0890
Feb 25, 2011 Based on FANUC articulated arm robot, iP Robotic Palletizer integrates automatic pallet lift and product collation system designed to continuously handle products at high-speeds in harsh environments. For precise product placement, lift system detects height of top layer of product and automatically indexes pallet downward as unit load is built, minimizing motion required by robot to perform palletizing. Machine is available as dual station 1-in-2-out system or single-station 1-in-1-out system.

Plastics Color-Chip, Inc.    Asheboro, NC 27203
Feb 24, 2011 Designed to optimize physical properties and aesthetics of polylactic acid, SoluPLAs(TM) line of additive concentrates and masterbatches enable PLA to be considered for broad range of applications, including food and beverage packaging. Additive solutions, comprising impact modifiers, mold release agents, UV absorbers, anti-static agents, and toners, optimize impact resistance and clarity. Products can be formulated to meet FDA medical, pharmaceutical, and food-contact requirements.

Reel Options® By Vandor Corp.    Richmond, IN 47374
Feb 24, 2011 Offering alternative to plywood, 19.75 in. Dead~Bolt(TM) Flange is available in 7, 8, 10, and 12 in. cores sizes with 1.59, 1.75, or 0.063 in. arbor holes. Drive hole is elongated to minimize need for adjusting winding machines. Made from environmentally friendly reprocessed material, flange is available KD or assembled and can be constructed with either paper or plastic cores.

Rocky Mountain Tracking, Inc.    Fort Collins, CO 80525
Feb 23, 2011 Measuring 4 x 2.5 in., real-time Ghost Rider GPS Tracker features rechargeable internal Li-Ion battery, internal antenna, and up to 5 days of continuous tracking. Wireless unit fits in any pocket or can attach to any object, making it suited for all types of asset tracking. Equipped with NavIQ web-based software, Ghost Rider can be tracked from any PC within 10 seconds.

Novatel Wireless, Inc.    Calgary T2E 7H7  Canada
Feb 22, 2011 Using N4A CMS(TM) software, Spider AT Systems manage, monitor, and track high-value enterprise assets. IP68-rated Spider AT 3000 Series is aimed at recovery applications and can track assets through frequent position reporting while optimizing battery life. Spider AT 4000 Series can tie into external power source, when available, and maintain long life on internal battery pack. Both retrieve critical information about assets based on user-defined alerts, specific events, or geo-fences.

Westfalia Technologies, Inc.    York, PA 17402
Feb 18, 2011 Occupying 10 x 15 ft footprint, Plastic Case Stack De-Palletizing System handles 3-4, 40 x 40 in. dairy pallets per minute, each with 9 stacks of empty plastic dairy cases, for max throughput rate of 180 cases/min. Modular and IP65-rated system, able to handle stacks that are palletized, unitized, or combination of both, utilizes clamp and lift technology that maintains full stack control. PLC with Ethernet connectivity and color HMI touchscreen is included.

Schunk    Morrisville, NC 27560
Feb 18, 2011 Suited for high-volume cutting, TENDO E compact can safely transfer torques up to 384 lb-ft at 20 mm clamping diameter. Hydraulic expansion toolholder, with vibration damping and precise runout accuracy of less than 0.0001 in. at 2.5 x D, protects machine spindle and cutting tool from damage. All common spindle connections are available for ¾ in. interfaces HSK-A63, SK40, BT40, and CAT40.

Qosmedix Div., Qosina Corp.    Edgewood, NY 11717 8329
Feb 17, 2011 Part number 70910 is dial-up applicator that can be used for dosing out serums or thin lotion-based formulations. Unit is clear 2 mL tube that features silicone spatula tip and clear cap. Twist-click enables formula to advance to tip for controlled flow, while spatula head provides smooth application.

FIPA, Inc.    Atlanta, GA 30318
Feb 17, 2011 Offered in 6 sizes from 70 x 70 mm to 160 x 600 mm, vacuum grippers are made to requirements/specifications. Variations include vacuum generation; open-loop, closed-loop control and monitoring; and vacuum provisioning. Working ejectors with suction performance are available for integrated vacuum generation, or vacuum can be supplied externally via regenerative blower. Also, valve technology makes it possible to accurately adjust suction air requirement to handled part's properties.

Tiffen Co. LLC, The    Hauppauge, NY 11788
Feb 17, 2011 Offered in 3 sizes, Domke Pro-V Jr series has soft interior that protects camera and screen against scratches, and movable inserts that allow configuration to accommodate specific camera and contents. Made of heavyweight, water-resistant, cotton canvas that breathes to minimize risk of condensation, bag offers compartments and pockets for storage and features memory foam bottom and blocks that add cushioned support while offering safe and secure fit.

Konecranes Americas, Inc.    Springfield, OH 45502
Feb 17, 2011 Powered by diesel-electric drive and rope hoist system, Boxrunner gives large container terminal operators flexible means of moving containers from ship-to-shore cranes to automated stacking cranes. Straddle carrier is available as 50 t twin twenty lift machine and as 40 t single lift machine that can travel at 30 km/h with 25 m/min hoist speed. Featuring electronic-hydraulic system with 4-cylinder steering, Boxrunner minimizes tire wear and maintenance.