Worksaver Inc.    Litchfield, IL 62056
Mar 19, 2012 Designed for contractors and suited for handling pallets of bricks or boxes, SSPF-3748 has one-piece backstop with class II tapered forks rated at 4,000 lb for pair. All-welded design offers see-through visibility, and product can also fit tractor loaders that use skid steer attaching systems. Able to mount to skid steer buckets without use of tools, forks extend 14.5 in. under bucket and 8 in. inside bucket to support load.

Acutronic USA, Inc.    Pittsburgh, PA 15222
Mar 19, 2012 Used for testing of inertial sensors and other electromechanical devices, portable 105-AVT features low-noise linear amplifier, ultra-high fidelity motion, and virtually no structural dynamics. Various Units Under Test (UUTs) can be attached to flexible mounting pattern on tabletop. Along with angular acceleration sensor and safe operation detection, features include greater than 1,000 radians/sec² peak acceleration, ±5° displacement, and flat acceleration response.

Dosatron International Inc.    Clearwater, FL 33765 1201
Mar 16, 2012 Featuring metal-free piston, Viton seal and O-rings, polypropylene housing, and adjustable ratio stem, D14MZ-D Series is designed for car wash presoaks, detergents/soaps, drying agents, bug removers, and waxes. Series includes Model D14MZ2-D with 500:1-50:1 ratio, Model D14MZ5-D with 200:1-20:1 ratio, and Model D14MZ10-D featuring 100:1-10:1 ratio.

Southworth Products Corp.    Portland, ME 04104 1380
Mar 16, 2012 Designed to automatically adjust height of pallets as boxes are added or removed, PalletPal 360 Air Level Loader allows operators to build or break down pallet loads with minimal bending, reaching, stretching, or walking around. Height adjustment is achieved by heavy-duty reinforced rubber air bag that maintains top layer of stacked containers at convenient height. Since all components are contained within diameter of turntable ring, palletizer allows full 360º access.

Matheson    Montgomeryville, PA 18936
Mar 16, 2012 Combining RFID and pressure monitoring technology, Lasso(TM) System offers customer centric supply chain and inventory management system capable of monitoring location and operating status of gas products and other assets in real-time. Lasso operating software is optimized for reporting critical parameters of compressed gases and has intelligence for generating gas cost and usage analytics to facilitate gas management decisions.

Peerless-AV    Aurora, IL 60502
Mar 15, 2012 Suitable for rental and staging companies that need mobile multi-display solution, DS-VWC655-3X3 Universal Video Wall Cart can hold 9 flat panel displays measuring 46-55 in. Unit features covered shelf that hides media devices, upright channels to organize cables, and 5 in. casters that can swivel full 360° for maneuverability. Positioning feature enables flush alignment without tools.

Mitsubishi Caterpillar Forklift America, Inc.    Houston, TX 77043
Mar 13, 2012 Reaching max speed of 9.3 mph, Jungheinrich® ECR 327/336 Series is suited for order picking, long distance transporting, and loading/unloading trailers. Electric units feature regenerative braking system that provides seamless transition from one direction to another while maintaining load stability. Proprietary Jungheinrich-built motor and controller enable optimal gradeability on inclines. For durability, ECR series features cast steel frame and sealed electrical components.

Harrington Hoists, Inc.    Manheim, PA 17545 1754
Mar 09, 2012 Made of die-cast aluminum, ED Infinity Electric Chain Hoists are available in 125, 220, 250, 350, 400, 525, and 1,050 lb capacities. External speed adjustment knobs enable operator to customize high and low hoist speeds, while metal hinged cover protects knobs from damage and prevents speed settings from shifting during operation. Additional features include Weston-style and regenerative load brakes, friction clutch for overwinding protection, and nickel-plated, heat treated load chain.

WIHA Tools    Monticello, MN 55362
Mar 07, 2012 Eighty piece master electrician's insulated tool sets are individually tested to 10,000 V for 1,000 V rating. Each tool is tested for puncture penetration and low temperature impact resistance, and insulation is tested for adhesion to tools when kept in temperature of +70°C. Insulating materials are flame retardant to prevent risk from fire or spark over, and water-tight traveling tool box features dedicated tool positions.

Thermo Fisher Scientific    Minneapolis, MN 55433
Mar 05, 2012 Designed for 2 and 5 mL Thermo Scientific Nunc Cryobank tubes as well as most standard Nunc and Nalgene cryogenic tubes, Universal Latch Rack incorporates flexible lid, which can pivot or be lifted off, making it suitable for handheld pipetting as well as automated dispensing via robotic picking and placing. Latch locks lid in place, providing stackable and secure storage to maximize freezer space with 48 tubes/rack for internally threaded caps or 24 tubes/rack for externally threaded caps.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Mar 05, 2012 Designed in house and built to customer specifications to fit inside standard truck bed, Jetter Reel Turn-key System includes hydraulic power pack with 8 hp motor, special hose for well cleaning applications, directional control valves, and air pressure manifold, all specified by customer and ready to go out of box.

Doosan Infracore America Corp & Eng Center    West Caldwell, NJ 07006
Feb 29, 2012 To promote efficiency in demolition and rock-breaking applications, DXB260H features 2-speed control of breaker frequency for adjustment between short and long stroke settings. Product weighs 5,400 lb and delivers up to 600 blows/min. It is designed for use with excavators in 27-37 metric ton range. Rated in 8,000 lb-ft impact energy class, breaker requires hydraulic flow rate from 39.5-63.5 gpm. Features include cradle-mounted grease station and blank fire protection.

Novatec, Inc.    Baltimore, MD 21225
Feb 29, 2012 GS Loader features controls that can be operated from pendant. Able to be left on side of loader or attached to 10 ft long pendant (included) and attached on side of material hopper, magnet-backed control includes load time, no-load alarm, alarm light, silencer, as well as proportioning and purging functionality. Sequential Micro-Burst blasts of air keep loader's internal filter from becoming clogged, unit operates in upright position, and double-tilt movement facilitates operator access.

Essemtec Ag      Switzerland
Feb 27, 2012 Facilitating feeder handling and set up of SMD pick-and-place machines, Cobra Feeder Cart features 2 racks for 45 feeders each and 360° wheels, which allow pushing in any direction. Cart serves as storage for feeders used for next job as well as repository for feeders disassembled from pick-and-place machine. Transporting feeders in cart is safe because door and elevator thresholds will not allow feeders to fall out.

ControlAir Inc.    Amherst, NH 03031 2315
Feb 27, 2012 Available in ¼ and ½ in. NPT porting for normal and high-flow requirements, respectively, Type-330 Air Filter Regulator provides pressure regulation and filtration. Automatic drain option prevents moisture from being retained in unit and being carried downstream. Type-340 Air Regulator, also available in ¼ and ½ in. NPT porting, provides accurate, constant control under variable flow rates and supply pressures. For both series, output ranges provide precision control up to 120 psig.

RNR Plastics, Inc.    Raynham, MA 02767
Feb 24, 2012 Opening from side for facilitated card access, Fleet Gas Card VisorWallet(TM) is heavy-duty, 30-gauge, clear vinyl holder with 1 in. wide, adjustable elastic strap. Holder can be concealed behind visor and helps improve resale value of fleet vehicles by eliminating permanent mounting brackets, screws, and glues that can damage fleet vehicles. Custom printing and color-coded strap options are available.

Schunk    Morrisville, NC 27560
Feb 22, 2012 Featuring hardened stainless steel components, maintenance-free VERO-S module clamps workpieces, pallets, clamping stations, existing fixtures, and tombstones with one or more clamping pins. Dual clamping stroke and integrated turbo function lend to retention force of 9,000 lb, promoting rigidity. Locking of quick-change pallet system is done mechanically via spring package. It is self-locking and clamps with form-fit; holding forces up to 16,800 lb are achieved.

Extreme Engineering Solutions (X-ES)    Middleton, WI 53562
Feb 22, 2012 Designed to reduce Size, Weight, and Power (SWaP) of deployed military systems, 13.5 x 5.88 x 6.0 in. XPand4201 can be configured with up to 5 conduction-cooled, 0.8 in. pitch 3U VPX payload modules and one 3U VPX power supply module. This sub-½ ATR enclosure weighs less than 19 lb fully populated and suits C4ISR applications in vehicles. Conducted from modules to sidewall- and top-mounted heat exchangers, heat dissipates to ambient environment via forced-air cooling.

Flambeau    Baraboo, WI 53913
Feb 21, 2012 Measuring 15.25 x 8 x 6.25 in., Super Semi-Satchel(TM) (6925AB) is molded in translucent, clear, ACID-FREE polypropylene (PP). Case features 3 removable dividers, which provide up to 4 custom compartments in each satchel. In addition to being stackable, case features front latch, comfort grip handle, and structural design integrity. Adaptable to any number of uses, product stores media, tools, and photographs for general use.

Brush Research Manufacturing Co., Inc.    Los Angeles, CA 90022
Feb 21, 2012 Available in 2 styles, Pin Vise Tool Holders offer secure method of holding small diameter deburring brushes when stem diameters are too small for chucking in automated machines. Double ended Model PV460 has hexagonal locking collet and comes with 2 reversible 4-jaw chucks. Offering swivel action, Model PV467 allows for precise and consistent control during deburring and finishing operations. Both are nickel-plated and are made from solid brass.