AZCO Corp.
Fairfield, NJ 07004
Jul 02, 2009 Acu-Sert(TM) CI-250 rotary Cut-to-Length, self-contained machine automatically feeds up to 9 in. wide material on roll. Photo optic eye system detects registration mark, then machine cuts material at up to 300 inserts/min and take away rollers feed it into package. Mounting on base plate, unit includes roll mounted on separate unwind stand and feed rollers adjustable from horizontal to 45° angle downward. It dispenses/inserts coupons, instructions, and absorbent pads.

Indexing Technologies Inc.
Ramsey, NJ 07446 0252
Jul 01, 2009 Space Saver VDI Spindle units support machine production capability by helping increase tool capacity and reducing chip-to-chip or retooling time. X-Axis is occupied twice by mounting one tool holder in Y-Axis and one tool holder in Y-Axis. Utilization of Z-Axis, on 2-spindle machine, means that 2 tool holders for main spindle and 2 tool holders for sub-spindle are used. When utilizing all tool spaces to maximum, machine can be equipped with up to 72 tools.

Gluefast Co., Inc.
Neptune, NJ 07753
Jul 01, 2009 Comprised of 3 parts, case making system can produce 40-50 covers/hr under supervision of one operator. Glue machine component is available for cold water-based or hot animal glues. Used for precision placement of binder board, integrated alignment table features tiltable table and uses suction to hold cover. Edge turner, also included, turns in edges of cover to firmly attach and bond to board.

McElroy Manufacturing, Inc.
Tulsa, OK 74158
Jun 30, 2009 Stub End Holder, designed for 8, 12, and 18 in. jaws or inserts, holds stub end fittings in place during fusion process. It features single adjustment point that adjusts all 4 jaws simultaneously, while automatically self-centering to ensure that stub end is held concentric to pipe. Devices feature serrated jaw to optimize gripping ability. Weighing less than 30 lb, they allow operators to clamp fittings with OD between 2.37 and 21.27 in.

Ermanco, Inc.
Spring Lake, MI 49456 9652
Jun 30, 2009 NBC(TM) accumulates products to provide contact accumulation with no line-pressure, making process precise, consistent, and gentle. Using same frame and drive components, this belt-driven live-roller conveyor may be configured into zero-pressure contact accumulation, non-contact accumulation, and transportation conveyor. Along with modular design, cconveyor offers ability to power up to 4 V-belt modules off either end of conveyor without additional drive.

Inkcups Now
Danvers, MA 01923
Jun 30, 2009 Available as 12- or 16-canister system, Harmony Ink Dispenser stores and accurately dispenses printing inks and thinners to facilitate ink mixing and PMS color matching. Tabletop solution employs 2 graduated pumps that allow for coarse and fine control over ink by delivering 0.1 gram accuracy for dispensing. Hermetically sealable and solvent-resistant canisters hold up to 2.5 L of ink or thinner, and automatic mixing feature helps keep ink at correct viscosity.

Flexicon Corporation
Bethlehem, PA 18020 8006
Jun 29, 2009 As fully mobile unit, Recirculating Spreader-Feeder evenly distributes powder and bulk coatings onto food products as they pass between its longitudinal discharge hopper and lower collection hopper. Horizontal conveyor, which has multiple discharge ports to apportion material across length of discharge hopper, automatically starts and stops to maintain preset fill level in hopper. Also, rotating agitator along bottom of hopper promotes uniform discharge through adjustable screen.

Sealed Air Corp.
Saddle Brook, NJ 07663-5291
Jun 29, 2009 Custom-designed to accommodate exact size and shape of product, Instapak® TempGuard(TM) coolers use polyurethane foam to keep temperature-sensitive products safe during shipment. Cavities can be customized to fit right amount of gel refrigerant or dry ice, lending to weight reduction, while ability to keep products colder for extended periods lets companies choose more cost-effective shipping options. Cooler is reusable, since foam is not fused to corrugated shipping container.

AGI - American Grippers Inc.
Trumbull, CT 06611
Jun 26, 2009 Offering gripping forces from 20-200 lb, 3-jaw Models AGA-23, AGA-33, AGA-43, and AGA-53 feature stroke-limiting screws to adjust stroke from 0-180°. When jaws are completely opened, work piece can be placed in fixture without having to retract gripper. Toggle mechanism increases in power as jaws near fully closed position and become self-locking when past parallel. All units are double acting with multiple air ports and mounting locations.

R & M Materials Handling, Inc.
Springfield, OH 45502
Jun 26, 2009 Capable of fitting inside 12 in. box truss, Stagemaker® SM2 has lifting capacity of ¼ ton and features pressure-cast aluminum construction. AGMA quality carburized and precision ground gearing helps minimize noise levels, chain guide ensures smooth release of chain from hoist, and single-chain system helps prevent jamming. While combination brake torque limiter system allows for external adjustment of overload, DC disk brake overrides clutch in case of slippage to promote safety.

ACI-ecotec GmbH & Co KG
Schwarzwald   Germany
Jun 25, 2009 Providing inline separation of mono- and polycrystalline solar wafers with thicknesses up to 120 µm, ecoSplit IXL features output capacity of 3,000 wafers/hr in continuous operation. System is equipped with 2 loading stations, onto which sawn wafers are placed in stacks of up to 250 pieces after pre-cleaning and manual inspection. Separation technology makes it possible to reduce breakage rates to 0.1%. After separation, wafers are fed to individually adapted transport units for cleaning.

New Avionics Corp.
Fort Lauderdale, FL 33306
Jun 25, 2009 With adjustable ice sensitivity to less than 0.001 in., Ice*Meister(TM) Model 9734-HTR allows any controlling host to respond to earliest formation of ice and take remedial action in real-time. Pulsing 1.2 A at 24 Vdc, sensor's radiant heater heats sensor probe and melts away offending ice, while gravity alone removes icemelt. Temperatures of aluminum heater panels are limited to 50°C for personnel safety. Applications include webcams, radio towers, weather stations, and telescopes.

Label-Aire Inc.
Fullerton, CA 92833
Jun 25, 2009 Designed to support variety of pressure-sensitive applicators/printer applicators, rugged stands are built using 3 x 4 in. steel tubes, are covered with powder coat finish, and feature locking casters. Offered in T-, U-, H-, W-, Low-Boy, and H-Base Low-Boy configurations, all models are available with food grade casters, leveling feet, and stainless steel construction. Low-Boy stand models feature low clearance design with low clearance casters.

ITT Interconnect Solutions
Santa Ana, CA 92705
Jun 25, 2009 Offering contact counts of 1-600, Chip-on-Flex (CoF) connectors are available in rack and panel, circular and D-subminiature configurations. Filter design features one standard flex per layout and utilizes flexible circuit internal to connector, with chip capacitors surface-mounted on small pad adjacent to feed-thru contact. Tested to MIL-DTL-38999 Series III mechanical shock, vibration, and high altitude DWV specifications, connectors exceed 1,000 cycles of thermal shock per MIL-STD-1344.

Bosch Packaging Technology
Minneapolis, MN 55445
Jun 24, 2009 Available in left-hand and right-hand versions, DCI Distribution Station can carry up to 160 rows of bar products per minute and move products from process belt to individual infeed conveyors at up to 70 rows per minute. Tensioner roller, moving parallel to conveyer belt, allows process conveyer belt to be released tool-free due to swivel drive unit. Enabling access for cleaning and maintenance, sub-frame stands clear of floor and panels are removable.

AGI - American Grippers Inc.
Trumbull, CT 06611
Jun 24, 2009 Combining zero-backlash rotary actuator, manifold, and parallel gripper, AGM Swivel/Gripper Modules provide solution for pick-and-place applications. Internal porting prevents airlines from twisting, rubbing, and snagging outside unit. With gripper stroke length of .25 in., smallest module in series can generate up to 5 lb-in. torque at 80 psi and up to 20 lb gripping force. Largest module has ratings of 250 lb-in. torque, 130 lb gripping force, and 4 in. stroke.

Solo Cup Co.
Highland Park, IL 60035
Jun 24, 2009 Suited for convenience stores, quick-serve restaurants, and other foodservice establishments, Reveal(TM) Polypropylene Cups are available in 12, 14, 16, 18, 20, and 24 oz sizes, with single lid fitting all 6 cups. Reveal(TM) 32 and 44 oz Go Cup® models come in clear, white, or 2 stock prints, with 1 lid fitting both cups. All are true flush-fill designs, providing accurate portioning. They can be custom printed in up to 10 colors to optimize branding opportunities.

Ryson International, Inc.
Yorktown, VA 23692
Jun 24, 2009 Depending on size of load to be handled, Spiral Conveyors can be slotted into circular workspace from 4 ft 8 in. to 8 ft 2 in. in diameter. Pre-assembled conveyors feature modular design that can be reconfigured in field to meet emerging needs. Operating at speeds to 200 fpm, units are equipped with automatic chain tensioning and built-in overload protection. They are available in powder coated carbon steel, stainless steel, or washdown versions for food handling.

General Machine Products Co.
Trevose, PA 19053
Jun 23, 2009 Used to install telecommunication cables over extended distances, Sidewinder can be used as end-puller or placed at mid-point. Trailer-mounted unit employs one 32 in. dia capstan to provide controlled force to pulling of rope or tape. Take-up drum, driven independently by hydraulic motor, has detachable side to facilitate rope/tape removal and can be declutched from drive. Adjustable from 0-1,100 lb, pulling tension is displayed on dial gauge, and max pulling speed is 200 fpm.

Northfield Precision Instrument Corp.
Island Park, NY 11558
Jun 23, 2009 Model 625, ¼ in. stroke and 6 in. diaphragm Hi-Low chucking systems offer on-the-fly and cycle interrupt methods of chucking. Products allow roughing and finishing of machine parts in one operation. Valve system, connected to sliding jaw air chucks, lets users drop jaw force by stopping spindle, rechucking, then contining machining finish cuts with no distortion. Models are available in SAE or metric in sizes from 3- 18 in., with accuracies from 0.001-0.00001 in.