Big Kaiser Precision Tooling, Inc.
Elk Grove Village, IL 60007
Nov 06, 2009 Available with offset body extension to achieve bolt hole and tap chamfers, C-Cutter Mini utilizes single insert to achieve 45° top and bottom chamfers while avoiding interference with inside of hole. Chamfer diameters range from .217-.827 in., with tap sizes from M8-M20 and bolt sizes from M6-M16. Design reduces cutting diameter to lowest limit, helping achieve high spindle speeds and feed rates, and multiple extension lengths are available to reach through holes as deep as 3.031 in.

Widia Inc.,
Latrobe, PA 15650
Nov 06, 2009 Available over standard diameter range of 0.3150-0.8264 in., Victory TOP DRILL M1(TM) Modular Drills come in flanged-shank or round-shank configurations. Units feature solid coupling for consistent performance from insert to insert, and front clamping mechanism to facilitate insert changes. Inserts are offered with UP(M) geometry in grade K20FTiAlN, featuring application-oriented differentiated point design aimed at holemaking in steel and cast-iron components.

Spiroflow Systems, Inc.
Monroe, NC 28110
Nov 05, 2009 Using automatic gain in weight adjustment to monitor and compensate for any weight variation, Model C1-2 can achieve filling rates up to 20 bags/hr, depending on flowability of product and storage hopper or conveyor used. Programmable one-touch controls enable operator to control filler operations as well as upstream in-feed devices. Offering accuracy within 1%, filler is suited for chemicals, food, dairy, pharmaceutical, plastics, minerals, and aggregates.

Behringer Saws, Inc.
Morgantown, PA 19543
Nov 05, 2009 Utilizing bi-metal or carbide-tipped saw blades, HBM 540A/ALU Bandsaw cuts aluminum profiles and solids. Heavy-duty machine, constructed with cast iron bow frame which travels on 3 sets of vertical linear ways and guides for stability, can cut rounds up to 21.2 in. dia and rectangular shapes up to 24.8 x 21.2 in. It incorporates frequency-controlled, 29.5 hp main drive motor with 984-4,264 sfm range and double chip conveyor system for removal of chips spun off during cutting cycles.

Union Process, Inc.
Akron, OH 44313
Nov 05, 2009 Able to process 200-500 lb of limestone/hr, CL-5 Stirred Vertical Ball Mill is suited for wet grinding limestone for flue gas desulphurization in power plants and for mineral grinding. Utilizing 2.5 gal of grinding media, it is equipped with variable frequency drive and 15 hp inverter duty motor. Attritors are top fed with product (approximately 6 mm) and water entering through the top of the mill where they are propelled down into media bed. Final product exits through top side of mill.

Pinpoint Laser Systems
Peabody, MA 01960
Nov 05, 2009 Coupled with Laser Microgage system, 90-Line Square Plane facilitates accelerated equipment measurement and alignment. Placed into path of laser reference beam, it forms precise right angle laser reference beam. Nosepiece of 90-Line, and right angle laser beam projected from it, can be turned through 360° rotation to define flat reference plane. Together, products provide precise measurements accurate to 0.0001 in. and can be used over ranges to 180 ft.

Miyano Machinery USA, Inc.
Wood Dale, IL 60191
Nov 05, 2009 With footprint of only 64.6 x 43.1 in., BX-26T emulates cam-style automatic machine operation and incorporates live tooling to complete complex parts in single setup. Product can accommodate bar stock up to 1.02 in. dia and comes with double stack turret with 4 Z-axis live tools and 14 static tooling stations. Linear guide ways and 8,000 rpm 5 hp spindle aids in high speed turning operations, while additional 4 X-axis live tools on Y-axis slide allows unit perform complex machining operation.

Hydratight
Red Wing, MN 55066
Nov 04, 2009 Suited for use on hard-to-reach pipe flanges whose integrity must be maintained, QuickFace has self-centering design with adjustable collets and clamps that provides concentric operation and accuracy. Portable tool weighs 15 lb and uses ½ in. cutting tools. Interchangeable lead screws make it suitable for resurfacing damaged raised-face and lens-ring joint flanges to varying finish standards. Rotated by hand, tool employs worm-gear mechanism that provides spiral gramophone finish.

Kalamazoo Industries, Inc.
Kalamazoo, MI 49001
Nov 04, 2009 Model C315/350 manual cold saw incorporates double vise assembly, with 6¼ in. maximum opening, that provides holding power on both sides of cut for burr-free operation. Saw includes 14 in. HSS blade; 3.5 hp, 3-phase TEFC motor; 2-speed spindle; totally enclosed transmission; 24 V controls; and built-in flood coolant. It can cut round shapes with up to 4/3¾ in. dia at 90° and 45°, respectively, as well as square/rectangular shapes up to 3¾ x 5 in. at 90° and 3¾ in. x 3¾ in. at 45°.

Knuth Machine Tools USA, Inc.
Lincolnshire, IL 60069
Nov 04, 2009 Featuring rigid construction, RSM Series Multi-Functional ID/OD Grinding Machines offer max grinding diameter of 12.5 in., max center distance of 80 in., and infinite variable spindle speeds. Machines are available with in-process measurement and include separate handwheels for manual grinding on X and Y axis. Optimized with hydraulic tailstock, which operates via foot pedal, RSM Series incorporates max 12 x 1.5 x 5 in. wheel diameter, preloaded ball screws, and automatic central lubrication.

Alcatel-Lucent
Paris 75008  France
Nov 04, 2009 Service Router Models 7750 SR-c12 and 7750 SR-c4 give service providers alternative for offering smaller communities same quality mobile, residential, and business services delivered in larger metropolitan areas. They are powered by FP2 chipset, which delivers network processing and traffic management at speeds to 100 Gbps. In addition to multiple high-availability features, products run under Service Router Operating System and integrate 5620 Service Aware Manager.

INDEX Corporation
Noblesville, IN 46060
Nov 03, 2009 Featuring vertical cast machine bed with heavily ribbed, enclosed modular design, Model R200 utilizes two 18,000 rpm motorized milling spindles and 2 movable 5,000 rpm work spindles that perform machining operations in 2 independent subsystems, each capable of full 5-axis machining of bar stock to 65 mm. System offers B-axis swivel ranges of 270° and 230° and rapid traverse rate of 45 m/min. It can accomplish full reverse side machining as well as parallel machining.

Schunk
Morrisville, NC 27560
Nov 03, 2009 Measuring 10 x 10 in. and suited for 5-axis machining centers, UNILOCK NSA SF achieves precise centering using 4 short tapers on corners, which also compensate for torques and tilting moments. Single clamping module generates 16,860 lb of force. UNILOCK NSA SF is failsafe, using 4 spring driven form-fit, self-locking clamping slides into centering sleeve that can be monitored. To unlock clamping modules, standard air supply pressure of 6 bars is sufficient.

OK International, Inc
Suwanee, GA 30024
Nov 03, 2009 Suited for production soldering, touch-up soldering, and SMD rework, MFR-2200 Series features SmartHeat® power and control technology, which responds to load, delivering energy required for each connection, while protecting sensitive components and substrates from damage. One or two hand-piece operation is chosen via front panel switch. With 2 separate power supplies, full power is available for each hand-piece that is in use. Three handpiece options are available.

AAEON Technology Inc
Taipei   Taiwan
Nov 02, 2009 Supplied in 1U form factor, FWS-7150 comes in 2 models featuring either up to 2.0 GHz VIA C7(TM)/Eden(TM) CPU with 400/800 MHz FSB or 1.0 GHz onboard C7 CPU with 400 MHz FSB. There are 5 LAN ports, which consist of 5 PCI 10/100Base-TX Ethernet LAN ports - 2 of which offer bypass function. Equipped with VIA CN700 +VT8237R+ chipset, appliance offers two 240-pin DDRII 400/533 DIMM sockets that accommodate up to 2 GB max system memory. Range of I/O promotes connectivity as well as expansion.

Royal Products, Div. Curran Mfg. Corp.
Hauppauge, NY 11788
Nov 02, 2009 Suited for common turning applications, Royal Live Centers feature Royal Roto-Shield with live center point machined from solid bar, and which incorporates coolant slinger. Device's shield also features spring-loaded seal that is resistant to abrasion, high temperatures, and most metalworking fluids.

Schleuniger, Inc.
Manchester, NH 03103
Oct 30, 2009 Designed to interface with cut or cut and strip machines, fully synchronized CableCoiler 1300 features 2 high-speed coiling pans and color touchscreen. All-electric unit is virtually maintenance-free and processes cable diameters up to ½ in. Coiling diameters from 4.3-9.0 in. and coil weights up to 22 lb allow for flexible production. To assure controlled coiling process, coiling pans have anti-slip surface and coiling pins inside.

Schober USA, Inc.
Fairfield, OH 45014
Oct 30, 2009 Used inline at printing press or offline in converting system, Embossing Modules and Tools are applicable for both web and sheet fed processes, in wide variety of materials including paper, board, and laminates. Braille set is comprised of negative segment that includes all possible 288 Braille positions and positive segment, which holds changing Braille embossing patterns.

Powr-Flite
Fort Worth, TX 76140
Oct 29, 2009 Designed for burnishing all types of hard-surface floors, 20 in. Millennium electric burnisher has rotational-molded one-piece housing to absorb vibrations. It has precision-balanced weight distribution, which eliminates need for compensation center or front-mount caster, improving operation and ease of use.

Glenro, Inc.
Paterson, NJ 07501 1799
Oct 29, 2009 Cantilevered Multi-Unwind and Rewind System offers auto edge control that is accurate to ±1 mm, and auto jog that allows material to automatically advance when pulled over load cell roll. System's auto run mode automatically unwinds start tension control when tension set point is reached. Configurable, PID-controlled product allows enable/disable, under/over-wind, tapering, and side-lay of each winder. It is suited for webs up to 18 in. wide with 20 in. roll dia and 100 lb roll weight.