Northfield Precision Instrument Corp.    Island Park, NY 11558
Jul 01, 2011 Interchangeable with 4 in. chucks, 5C Collet Chucks utilize standard wet or dry air feed tubes with same bolt pattern as 4 in. models. All components are hardened and ground to 58/63 R.C. and all diameters are ground within 1/10,000 T.I.R. Utilizing standard 5C collets as well as 5C expanding collets, chucks run at speeds in excess of 8,000 rpm.

Doosan Infracore American Corporation    Suwanee, GA 30024
Jun 08, 2011 Suitable for parts up to 16.5 dia x 29.9 in. long, Puma 3100 accepts bar stock to 4 in. dia and employs 30 hp motor which drives spindle at speeds to 2,800 rpm and generates max spindle torque of 828 lb-ft. Thermal isolation system eliminates thermal deformation by preventing machine-generated heat from reaching bed or headstock. Other features include tooling system with conical and flat-face planar interface; non-lifting, 12-station turret; and Fanuc 0iTD controller.

Methods Machine Tools, Inc.    Sudbury, MA 01776
Jun 07, 2011 Nakamura-Tome Multitasking Turning Centers are available with CAMplete TruePath Turn/Mill software, which provides G-Code editing, optimization, analysis, and verification tools. Enabling range of turn/mill functions, software delivers full Simulation of Nakamura turning centers and programs as well as tooling and workholding libraries. Capabilities for G-Code editing and verification, reorder and move operations, as well as toal machine motion monitoring are standard.

Northfield Precision Instrument Corp.    Island Park, NY 11558
May 13, 2011 Model 627w (.0001 TIR) 6 in. dia., coolant/air blast thru, 2-jaw air chuck, with 1 in dia. counter bore for tap clearance, provides workholding package to grip hole saw blanks for turning and tapping. Sub-jaws have 2 bullet nosed pins that will grip blanks between 2 holes, and ¾ in. wide jaws fit between 2 hardened and ground full circle segments mounted to chuck face to support workpiece during machining. Accuracies range from 0.001-0.00001 in.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Mar 08, 2011 Featuring 3 in. diameter, hydraulically actuated, internal grip Collet Chucks mount on tilting table to drill angled hole. Fixed stop pad picks up inner face of automotive work piece while chuck expands and pulls back to grip part. Chucks repeat to 1/10,000 T.I.R. and have low profile that enables 8 chucks on one table.

Seco Tools Inc    Troy, MI 48083
Nov 23, 2010 Developed for finish turning of nickel-based super alloys, CBN 170 grade is optimized for toughness and wear-resistance that can help increase tool life and cutting speed. It incorporates whisker ceramic binder and satisfies surface finish, tolerance, and length of cut requirements found in finishing operations. Designed for continuous cutting applications, product can achieve depths of cut up to 0.020 in. at cutting speeds from 900-1,300 sfpm.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Oct 29, 2010 Able to handle prototype as well as production work, UTILIS® Multidec® 1600 series is comprised of micro grooving and turning tools ground from premium carbide grades. Turning tools, designed for small Swiss machines, cut .0019-.108 in. thick grooves with .0004 in. repeatability. Products meet design and production requirements of micro medical devices, dental implants, electronic, and other micro components utilizing micro grooving.

MAG IAS, LLC    Erlanger, KY 41018
Aug 27, 2010 Offering multiprocessing options for live spindle machining and grinding, fixed and adjustable-rail style turning centers feature twin columns mounted to base and come in 4 models with table diameters of 5, 6, 7, and 8 m. Modular products suit various industries, including wind and nuclear, with 150,000-250,000 kg table load capacity, 2,500 mm ram travel, and 1,500 mm min height under rail. Integral 350 mm cross-section ram is optimized for rigidity and chatter-free machining.

Toolmex Corp., Machinery Div.    Schaumburg, IL 60193
Aug 06, 2010 Designed to handle parts up to 39 in. dia x 295 in. long with up to 19,800 lb between centers, Model FTM1000 maintains 39 in. swing over bed and cross slide. Spindle bore sizes are available in 5.5, 8.6, or 12.5 in. Suitable for parts up to 27 x 177 in. with up to 8,500 lb between centers, Model FTM700 maintains 27 in. diameter swing over bed and cross slide and is available with 5.5 or 8.6 in. spindle bores. Both are suitable for machining cast iron, steel, and alloy parts.

Doosan Infracore America Corp & Eng Center    West Caldwell, NJ 07006
Aug 05, 2010 Providing 25.6 x 39 in. work envelope, Puma 480D features 10.8 in. through-hole diameter, 60 hp turning power, 3,293 lb-ft torque, and up to 6,102 lb Z-axis thrust. Wrap-around guideways are induction hardened, precision ground, and bonded with low-friction fluroplastic coating to minimize wear and dampen vibration. Power is supplied by 2-speed gearbox, generating spindle speeds up to 1,000 rpm. Employing 12.6 in. dia Curvic coupling, 12-station turret exerts 23,606 lb hydraulic clamping force.

Tornos    Lombard, IL 60148
Aug 05, 2010 Available with or without guide bush, single-spindle Gamma Turning Centers offer 1-2 tool systems and can handle parts up to 20 mm in diameter. Gamma 20/6 provides 6 linear axes, while Gamma 20/5 offers 5 linear axes. Ergonomic design provides access to all tool positions, while automatic lubrication unit, swarf tray, and removable oil pan facilitate maintenance.

Doosan Infracore America Corp & Eng Center    West Caldwell, NJ 07006
Jul 21, 2010 Puma 2600SY has structurally stable bed that absorbs low-frequency/high-amplitude forces of rapid acceleration/deceleration and vibration associated with heavy cuts. System has 24-position turret with 7.5 hp motor that turns live tooling at up to 5,000 rpm. Designed for parts with up to 14.8 in. dia and 29.9 in. long, unit also includes 35 hp spindle motor that generates speeds up to 4,000 rpm, while y-axis movement is achieved by linear interpolation and synchronous movement of X1 and X2 axes.

Emco Maier    Columbus, OH 43228
Jul 20, 2010 Equipped with 25 kW, 4,000 rpm main spindle that delivers 250 Nm torque, Model VT250 is designed for turning, drilling, and threading of chucking, cast, or forged parts. Max work piece turning diameter is 7.87 in. and max length is 5.91 in. Machine provides direct-driven travel of 20.9 x 12.2 in. in X and Z axes and ±3.5 in. in Y axis. Equipped with integrated pick-up system, VT250 self-loads workpieces. Conveyor system stores up to 24 workpieces and moves work into pick-up position.

FUJI Machine America Corporation    Vernon Hills, IL 60061
Jul 16, 2010 Equipped with dual 100 mm diameter spindles powered by 15/20 hp spindle motors, Model CSD-300 provides accurate turning of various heavy parts. System features hydraulic clamping loader, 8-10 in. capacity workholding chucks, hardened box way slide, and 2,260 mm wide machine base. Turret delivers speeds of 0.26 sec/index, while 3-axis gantry robot control achieves robot alignment to spindle center line. To save energy, machine includes auto shut-off LED light.

Doosan Infracore American Corporation    Suwanee, GA 30024
Jul 06, 2010 Lynx 300 features 10 in. dia, 3-jaw power chuck that turns 3 in. bar stock at speeds up to 3,500 rpm. Unit's bed is 1-piece Meehanite casting that absorbs vibration and dissipates heat. Linear motion guideways allow traverses of 945 ipm on X-axis and 1,181 ipm on Z-axis, and 12-station turret has 8.26 in. dia curvic coupling and 11,465 lb of hydraulic clamp force. Indexing repeatability is ±0.0005° and turret indexing is non-stop and bi-directional, with 0.15 sec next-station index time.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Jun 15, 2010 Model DPH-400W 4 in. dia diaphragm chucks feature stops with 3 small air detect holes for part seating conformation - air is pumped through holes, and when part rests on the stop air pressure rises, tripping pressure switch that starts machining process. Four clover adapters have grooves for CAM follower to snap into to orient chuck when stopped, and 8 passage rotary union actuates all four chucks independently when mounted to 4 spindle Theilenhaus machine.

Emco Maier    Columbus, OH 43228
May 26, 2010 In addition to 2 spindles, 2 turret tool systems with total of 24 driven tools, and VDI25 rapid change system, Hyperturn 45 includes Y axis with 70 mm travel in upper slide system and Z2 axis in lower slide system. Main and counter spindles are equipped with integrated water-cooled spindle motors with drive power of 15 kW, max speed of 7,000 rpm, and 100 Nm torque. Maximum turning diameter is 300 mm. For programming, machine includes Siemen's Sinumerik 840D-sl control and drive system.

MAG IAS, LLC    Erlanger, KY 41018
May 20, 2010 Adding surface finishing to processing capabilities of vertical turning centers, automatically changed Grinding Attachment allows finishing of ID, OD, and plane surfaces on parts up to 185 in. diameter. VTCs equipped with 22/33 kW grinding attachment can produce better than 10 µin. finishes and roundness of less than 60 µin. with diameter size control of 0.001 in. Utilizing wheel sizes up to 15.75 in., attachment produces 295 lb-ft torque and max speed of 3,000 rpm.

Kennametal, Inc.    Latrobe, PA 15650-0231
Apr 26, 2010 Beyond(TM) series include RU (Roughing Universal) and UP (Universal Positive) geometries in round inserts for optimal productivity in turning steel, stainless steel, cast iron, and high-temperature alloy. Engineered to promote chip control at lower cutting forces, geometries promote size control, surface finish quality, long tool life, and reduced load spikes. RU geometry suits heavy-duty roughing tasks, while UP geometry is designed for medium machining and finishing.

Emag    Farmington Hills, MI 48335
Mar 25, 2010 Intended for turned parts manufacturers, VL 5i integrates recirculating conveyor chain with carrier prisms; fluid cooling system for spindle motor and turret; and chip conveyor. Automation equipment helps create fixed production cycle, and pick-up station behind machining area lets operator remove finished components and insert new raw-parts at front of machine. With indexing times of 2.2 sec, 12-station turret accommodates turning and driven tools for drilling/milling.