Routers & Router Bits

Related Categories
Computer Hardware & Peripherals, Machinery & Machining Tools

Industrial Firewall keeps automation networks secure.

January 15, 2016

Powered by Intel® Atom™ E3815 processor, 3-port IFW330 Firewall with NAT/VPN/router all-in-one, is designed to protect sensitive networks and mission-critical assets against growing cyber threats. Fanless DIN-rail system provides stateful packet inspection, Denial of Service, and Intrusion Detection and Prevention. Supporting IPv4 and IPv6 dual-mode protocol, IFW330 offers high throughput rate up to 500 Mbps max. Appliance includes 2 GB DRAM and 2 GB CompactFlash™ for storage. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools, Electrical Equipment & Systems

Industrial LTE Router targets critical infrastructures markets.

January 15, 2016

Supplied in ruggedized aluminum enclosure, Digi TransPort® WR31 addresses industries that manage multitudinous remote assets in environments where onsite visits are infrequent or impractical. Class 1/Division 2 and ATEX solution has DIN-rail form factor and is available in multiple variants. Along with security and monitoring and intelligence to operate on nearly any 3G or 4G LTE network worldwide, features include support for global HSPA+ and 4G LTE networks, software selectable 3G/4G LTE. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools, Electrical Equipment & Systems

Wi-Fi Routers offer traffic optimization, WPS, and WPA or WPA2.

January 8, 2016

Incorporating amplifiers that maximize range and gigabit ports for supplemental wired connectivity, EXO series AC1900 Wi-Fi Router (DIR-879) and AC1750 Wi-Fi Router (DIR-869) provide whole-home coverage for Smart Home device connectivity. SmartConnect technology included with AC1900 router automatically assigns clients to wireless band to optimize bandwidth. Respectively, DIR-879 and DIR-869 deliver 11AC Wi-Fi dual band connectivity with up to 1,300 Mbps on 5 GHz band and 600/450 Mbps on 2.4GHz band. Read More

Machinery & Machining Tools

CNC Routers feature high-speed spindle.

December 21, 2015

Available on Pacer and Trident Series machines, with or without automatic tool change, PDS XLC70 High-Speed Spindle is capable of operating at speeds up to 40,000 rpm. Quick-release 3.0 hp spindle is cooled by compressed air, eliminating need for water chillers. PDS XLC70 is 100% rated, designed for S1 duty cycle, and can run at full speed and on full power all day. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools, Electrical Equipment & Systems

Wi-Fi Router accelerates network speeds via MU-MIMO compatibility.

December 18, 2015

Along with traffic and signal strength/throughput optimization technologies, AC3150 Ultra Wi-Fi Router (DIR-885L/R) incorporates multi-user MIMO (MU-MIMO) technology for simultaneous transmission to groups of clients. Router has 4 detachable external antennas and high power amplifiers and supports 4x4 data streams and speeds up to 2,167 Mbps on 5 GHz band and 1,000 Mbps on 2.4 GHz band. Four Gigabit LAN Ethernet ports provide wired connectivity, and one USB 3.0 port is standard as well. Read More

Sensors, Monitors & Transducers, Computer Hardware & Peripherals, Machinery & Machining Tools, Test & Measuring Instruments, Electrical Equipment & Systems

Wireless Router enables remote pressure readings.

December 15, 2015

Providing internet connectivity for Bluetooth-enabled CirrusSense™ pressure sensors attached to refrigerant, oil, and water lines, CirrusSense™ Wireless Router enables remote pressure readings, diagnostics, and immediate email/text alerts. All-digital sensors are available in 2 compensated accuracies of 1% and 0.25% and can monitor pressure of any fluid from vacuum to 10,000 psi. Sealed to IP65 rating, sensors uses one-piece, precision-machined stainless steel diaphragm and header. Read More

Machinery & Machining Tools

Mini CNC Router provides 2 x 3 ft cutting table.

November 5, 2015

Suitable for any size production shop or educational institute, HD Mini CNC Router is powered by 2 hp HSD high-frequency collet spindle with precision ball screw drives on all 3 axes. Heavy-duty production machine is controlled using hand-held micro stepper controller that can run industry standard G and M codes. Featuring automatic tool calibration pad and aluminum T-slot table for part fixturing, router is suited for use with wood, plastic, fiberglass, and metal. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools, Electrical Equipment & Systems

Dual-Band Wi-Fi Router incorporates Smart Connect Technology.

November 3, 2015

AC1900 Wi-Fi Router (DIR-880L) is DD-WRT compatible and features Smart Connect Technology, which automatically connects each device on network to clearest band available to deliver best connection for handling bandwidth-intensive activities. Respective Wi-Fi® speeds are up to 1,300 and 600 Mbps on 5 and 2.4GHz bands. Along with four 10/100/1000Gbps Ethernet ports, features include USB 3.0 port, GUI, traffic prioritization via QoS engine, and wireless encryption via WPA™ or WPA2™. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

Wi-Fi Router provides 128 MB flash memory.

October 13, 2015

Based on dual-core 1.6 GHz processor, WRT1900ACS Dual-Band Gigabit Router is equipped with 512 MB RAM, 4x Gigabit LAN ports, 1x eSATA/USB 2.0 port, and 1x USB 3.0 port. Featuring 4 external antennas that are adjustable and removable, unit is capable of speeds up to 1.3 Gbps on 5 GHz band and up to 600 Mbps on 2.4 GHz band. Router includes Linksys Smart Wi-Fi setup and management tools and offers full open source support in OpenWrt's Chaos Calmer release 15.05. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools, Electrical Equipment & Systems

Cloud-Ready IP Routers suit small- to mid-scale applications.

September 28, 2015

Offering full IP edge routing capability in mid-size form factor, 7750 SR-e Service Routers come in 400 Gbps, 800 Gbps, and 1.2 Tbps variants that support GE, 10GE, and 100GE interfaces. NEBS-compliant systems enable converged IP-optical network with GMPLS UNI. Routers leverage FP3 silicon and SR OS operating system as well as common network and service management with 5620 SAM Service Aware Manager, and multi-layer SDN control with Network Services Platform. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

M2M Router facilitates migration of assets from 2G to 4G LTE.

September 25, 2015

Featuring 2 Gigabit Ethernet ports, vehicle voltage support, GPS, and ignition input for mobile assets, NTC-140-02 provides real-time M2M data connectivity and remote management over 4G. Router enables M2M applications, such as video surveillance, where power is available but fixed line Internet access is not. Along with automatic 3G failover and instant fall-back to 4G via Gigabit Ethernet ports for reliability, features include remote management protocol support and ruggedized enclosure. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

All-Outdoor Router integrates microwave capability.

September 14, 2015

Converging microwave and IP/MPLS functionalities into one device for all-outdoor deployments, CTR 8380 extends IP/MPLS to cell site to improve network scalability. Zero-footprint design eliminates need for shelters or cabinets and thereby reduces A/C requirements as well as power and fuel consumption. In addition to being suited for rooftop locations for delivery of enterprise services, this all-outdoor microwave router can be used for all-outdoor macrocell and small cell backhaul. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

WiFi Router supports M2M deployments on 4G LTE network.

September 14, 2015

Certified by Verizon Wireless for deployment in U.S., industrial-grade NTC-140W-01 facilitates seamless migration of devices, machines, and other assets from 2G to 4G LTE. Unit features 2 Gigabit Ethernet ports and high-speed WiFi along with vehicle voltage support, GPS, and ignition input for mobile assets. With automatic failover to 3G when outside of 4G coverage areas, device ensures reliable connectivity to time critical systems, tele-health services, and disaster recovery applications. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

Cellular Automation Products offers multi-carrier capabilities.

July 23, 2015

Sixnet® series RAM® and IndustrialPro® cellular automation products have built-in 4G LTE multi-carrier cellular support for North American carriers. With multi-carrier capabilities, those using Red Lion RAM cellular RTUs and IndustrialPro routers can select and switch between wireless carriers to alleviate cellular coverage or bandwidth issues. Built-in event engine can trigger I/O or send SMS text messages based on real-time data to provide local control and real-time remote monitoring. Read More

Machinery & Machining Tools

CNC Router increases productivity in plastics industry.

June 30, 2015

Helping streamline plastics fabrication in production shops, Venture Plus handles cutting, drilling, and carving while delivering high polished accuracy with smooth edge finish. Features include 12 hp HSD automatic tool changer spindle with 8 tool rotary carousel, 4-zone vacuum table, 10 hp rotary vane pump, and material alignment pop up pins. Along with PC-based OSAI industrial controller, components include Delta AC servo motors and drives and precision helical rack and pinion. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools, Test & Measuring Instruments

LTE Cellular Gateway maximizes reliability and minimizes latency.

June 15, 2015

OnCell G3470A-LTE helps system integrators utilize LTE to transform M2M applications. Integrated high-speed, 4-port Gigabit Ethernet switch allows up to 4 devices to be connected with ability to NAT and route between cellular connection and wired ports. Together, features such as dual SIM support for cellular connection redundancy, dual power input, and GuaranLink™ technology for connectivity ensure uninterrupted video streaming over LTE networks in harsh and demanding industrial environments. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

IIoT Gateway simplifies field device integration.

June 11, 2015

Equipped with dual serial ports, FieldServer EZ Gateway Modbus to BACnet (FS-EZX-MOD-BAC) interfaces Modbus RTU and Modbus TCP devices, such as power meters and flow meters, to BACnet MS/TP or BACnet/IP systems in commercial and industrial facilities. EZ Profiles feature reduces configuration and installation time, while DeviceProxy™ virtualization allows Modbus devices to be managed and reconfigured as though they are native participants in BACnet management framework. Read More

Electrical Equipment & Systems, Optics & Photonics, Computer Hardware & Peripherals, Machinery & Machining Tools

Multi-Stream Router delivers 5.4 Gbps total Wi-Fi data rates.

June 5, 2015

Used where multiple devices concurrently stream HD and Ultra HD content, 8-Stream 5G WiFi XStream MU-MIMO platform features pentacore architecture that realizes max speeds over 3.8 GHz. MU-MIMO support improves wireless networking efficiency, while 1024 NitroQAM™ technology promotes performance, reach, and rate through high-power RF on 5 and 2.4 GHz bands. Router supports 8 streams at 5 GHz and 4 streams at 2.4 GHz; extended 5 GHz support adds three 80 MHz channels and two 160 MHz channels. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

High-Throughput Router suits high-security corporate networks.

June 5, 2015

Available for JUPITER™ System, Model HT1300 is designed to operate over conventional C-band and Ku-band, as well as Ka-band satellite capacity. Device provides 100 Mbps throughput and boasts high availability via L-band interface to operate with variety of outdoor units, including high-power amplifiers. Fully managed from central location, Model HT1300 provides continuous status monitoring and diagnostics that are integral to JUPITER's embedded web GUI. Read More

Electrical Equipment & Systems, Optics & Photonics, Computer Hardware & Peripherals, Machinery & Machining Tools, Communication Systems & Equipment

Satellite Communications Router supports 100 Mbps throughput.

June 1, 2015

Fully managed from central location, HT1300 enables satellite operators worldwide to leverage JUPITER™ System over conventional satellite capacity while positioning them for seamless migration to future high-throughput (HTS) satellites. Router operates over conventional C-band and Ku-band while also supporting Ka-band satellite capacity. High availability and flexibility via L-band interface enable operation with outdoor units, including high-power amplifiers. Read More