Joining Technologies    East Granby, CT 06026
Jul 15, 2010 Used for splicing iron and nickel-based strip alloys, Infinite Web(TM) 355 employs all-in-one design that offers laser welding and cutting with single head. It joins leading and trailing edges of metal coils in strip processing lines, creating continuous feed with no downtime due to rethreading/realignment. Able to service multiple converting lines, standalone mobile system has touchscreen interface, canned programs for selected alloys, and self diagnostics.

ESS Technologies, Inc.    Blacksburg, VA 24060
Jul 13, 2010 Automatic top cap forming system allows manufacturers to automate creation of retail-ready display pallets and pallets that use top caps between layers for stability. It can be co-located with ESS Robotic Pallet Cell that places formed top cap on each completed layer or as required. Allowing changeover in under 10 min, product includes FANUC M-20iA robot with vacuum end-of-arm-tooling as well as Allen Bradley ControlNet networking controls which allow pallet cell to control timing of system.

EV Group Inc.    Tempe, AZ 85284
Jul 12, 2010 Designed to accommodate university and research demands, EVG610 mask and bond alignment system can process substrate pieces and wafers up to 200 mm. This flexible R/D system supports processes such as UV-nanoimprint lithography (UV-NIL) and fine patterning, wafer bumping, and chip-scale packaging for MEMS, IC, and compound semiconductor devices. Flexible configurations are available, for pieces up to 4, 6, or 8 in. substrates.

Kyocera Industrial Ceramics Corp., Industrial Ceramic Products Group    Mountain Home, NC 28758
Jul 05, 2010 Designed for machining gray and ductile cast iron, CA4505 and CA4515 carbide cutting tools utilize Bright Black coating technology for resistance to premature wear and fractures. CVD coating provides anti-peeling performance through combination of ultra-fine TiCN layer, alpha-alumina layer, and special-surface top layer, which minimizes material build-up on insert cutting edge. CA4505 is suited for continuous machining, while CA4515 is suited for continuous or interrupted machining.

Sunnen Products Co.    St. Louis, MO 63143
Jul 02, 2010 Using standard collet connection, KRQ tool requires no indicating for parallel or conical runout - accelerating setup and job changeover. This enables shops to inventory range of tool sizes for efficient processing of short production runs. Available in diameters of 5.0-19 mm in increments of 0.10 mm, tool can work with controlled-force honing technology to enable shops to obtain precise bore size control. Mandrel works with diamond and CBN superabrasives and utilizes carbide shoes.

Techno, Inc. - CNC Router Systems    New Hyde Park, NY 11040
Jul 01, 2010 Designed to simplify metal cutting operations, HPLC CNC Plasma Cutter Series is built from heavy-duty welded steel and includes precision drive system and fully automated CNC Plasma Interface to guide users through cutting process. High-quality plasma torch as well as electronic circuitry for automated torch functions promote smooth operation. Unit is available with choice of 3 standard table sizes, which can handle up to 1¼ in. thick material.

Optical Gaging Products, Inc.    Rochester, NY 14621 4839
Jun 30, 2010 Focus(TM) Specialist 16 in. Horizontal Contour Projector® employs completely telecentric optics which yield upright and reversed images that are crystal-clear and undistorted on 16 in. dia viewing screen. Along with all-LED TruLight(TM) illumination, eCAD(TM), and Projectron(TM) automatic edge detection technologies, benchtop comparator offers dedicated 5x magnification lens, motorized worktable with 15 x 6 in. XY travel, eChek(TM) metrology software, and mineral cast base.

Flexible Steel Lacing Co.    Downers Grove, IL 60515-4200
Jun 28, 2010 Available in workbench version and as splitter with its own stand, Novitool® PLY 130 cuts in between plies of conveyor belt, which is often required in preparation of splicing belt with splice press. Unit can prepare finger over finger splices as well as stepped splices. For safety, machine is provided with one electrical switch for on, off, and reversed operation, and foot pedal for controlling splitting operation.

Reed Manufacturing Co.    Erie, PA 16512
Jun 28, 2010 Combo Roll Groover model RGCOMBO812 forms standard rolled grooves in 8-12 in. steel, stainless steel, and aluminum pipe with up to 0.188 in. wall thickness. Professional-grade, 2-in-1 service tool allows complete change in minutes from power machine operation to manual work. Compact and designed for portability, tool meets jobsite grooving requirements of mechanical piping system installations and is available with one wrench for power grooving and angled wrench for manual grooving.

Amacoil Inc.    Aston, PA 19014
Jun 23, 2010 Able to be used with Uhing traverses and other level winding traverse drives, AVS system uses sensors to monitor and coordinate spool rotational speed relative to accumulation of material at spool flanges. Continual automated balancing of spool rotational speed with line feed speed and traverse speed/position results in smooth, level wind with no depressions or bulges at spool flanges. Suitable for spooling 0.008-0.197 in. dia wire, system handles spool rotational speeds to 3,000 rpm.

Sunnen Products Co.    St. Louis, MO 63143
Jun 21, 2010 Available on SV-1000 and SV-500 Series, multi-feed technology combines controlled-force tool-feed with controlled-rate feed system, allowing user to select best option for workpiece geometry, material, and tool type/size. Controlled-force honing ensures optimum cutting load on honing abrasive throughout cycle and eliminates glazing, while controlled-rate tool feeding is typically used with plated-diamond CGT honing tools, which use sleeve of abrasive for full contact with bore surface.

Agie Charmilles, LLC    Lincolnshire, IL 60069
Jun 16, 2010 Model FO350 SP contains microprocessors that automate the process of machining openings, from roughing to finishing. It features 3-sided drop tank to ease access to work area, and DPControl that suggests electrode undersize and rationalizes number of electrodes necessary for effective machining. Traverse rate is 2.36 ips on X, Y, and Z axes and unit can handle workpieces up to 31.5 x 21.7 x 14.6 in. and 1,100 lb and accommodates electrodes of up to 110 lb.

Tidland Corporation    Camas, WA 98607
Jun 14, 2010 Featuring dust-tight, water-resistant, rugged enclosure, Class III e-Knifeholder also offers automatic calibration of side-force and overlap to ensure reliable performance in demanding, mill-duty operations. Once optimal settings are configured, at factory or via electronic interface, changeover can be achieved without operator intervention.

Royal Products, Div. Curran Mfg. Corp.    Hauppauge, NY 11788
Jun 11, 2010 Comprised of PLC control, 1 m dia welded steel turntable with 850 in.² usable surface area and 700 lb payload capacity, and optional integrated conveyor, Rota-Rack® enables any bar-fed CNC lathe to run unattended for extended periods. It indexes each time finished part exits machine, and all contact surfaces are covered with UHMW plastic for optimal workpiece protection. Height-adjustable from 11-50 in., universal design enables use with any CNC lathe equipped with parts catcher.

Kason Corporation    Millburn, NJ 07041
Jun 10, 2010 Used for screening pharmaceutical powders and other contamination-sensitive products, Ultra Sanitary Mini Centri-Sifter(TM) is constructed of stainless steel with continuous welds ground and polished to sanitary standards. Unit can be disassembled in less than 3 min, providing access to all material contact surfaces, and sanitized manually or in autoclave. Gravity-fed design features rotating helical paddles, cylindrical screens of various materials, and 2 discharge outlets.

Endress + Hauser Inc.    Greenwood, IN 46143
Jun 10, 2010 Liquistation CSF48 automatically takes liquid samples from process streams, stores them in plastic/glass bottles, and can perform up to 2 online analyses at measuring point. Using Memosens sensors, measurements include nitrates, conductivity, oxygen, pH/ORP, and turbidity. In addition to integrated data logger, features include 2 digital inputs, 2 analog inputs and outputs, and alarm relay. Add-on modules allow upgrades from single- to multi-channel measurements.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Jun 09, 2010 Suited for recycling, disposal, or reprocessing operations, TASKMASTER® PRS (Product Recovery System) separates dry or liquid bulk product from packaging. Product is separated and discharged from one port, while containers and packages are transported to second discharge port. Suited for expired or returned products packaged in cardboard, plastic, metal cans, and corrugated cartons, system is offered in carbon- or stainless-steel construction options.

Watts    North Andover, MA 01845
Jun 07, 2010 Supporting flow rates from 0.5-10 gpm, single-cartridge style OneFlow® Model OFTWH ensures scale-free operation for all major tankless water heater brands. System prevents scale by transforming dissolved hardness minerals into harmless, inactive microscopic crystal particles that make their way through plumbing systems without attaching to pipes, fixtures, valves, or heating elements. Virtually maintenance-free system features ¾ in. connection sizes.

Renishaw, Inc.    Hoffman Estates, IL 60192
Jun 07, 2010 Featuring 6 minute warm up time, Lean-Design XL-80 brings nanometer-level motion analysis to calibration, error-mapping, and compensation of laboratory equipment, semi-conductor processing machinery, CMMs, machine tools, and robots. System takes readings at 50 kHz and maintains system accuracy of ±0.5 ppm over operating range of 32-104°F. Multi-signal connector provides standard trigger signal-in for data capture, analog voltage-out facility, and optional quadrature signal output.

Wilson Tool International Inc.    White Bear Lake, MN 55110
Jun 07, 2010 Available for Wilson American Precision and WT Style Precision(TM) press brake tooling, ExpressRail(TM) accelerates setups and changeovers for press brake fabricators. System automatically clamps and seats tooling along full length of beam in one operation via one touch of wireless pendant control. Featuring low-profile design that will not interfere with open height required for larger parts, clamping system is treated with Nitrex(TM) for corrosion resistance.