Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Oct 10, 2008 Along with 15 A motor, RS35 heavy-duty reciprocating saw features adjustable aggressive orbital action, variable speed control, and Constant Response(TM) circuitry that maintains consistent, controlled power. Anti-Vibration system, with shock absorbing handle and counterbalance mechanism, is custom-engineered to isolate user from tool vibration while also promoting all-day comfort and control. Also included, LockJaw(TM) blade holder enables one-handed blade changes.

Hitachi Power Tools
Norcross, GA 30093
Sep 16, 2008 Powered by 9.5 A motors and featuring no-load speed of 5,500 rpm, Models C8FSE and C8FSHE slide compound miter saws weigh 31 and 32 lb, respectively. With bevel range of 48° to left and 5° to right for precise compound cuts, they feature thumb-actuated positive stops to adjust miter angles of 15, 22.5, 31.6, and 45° to both left and right. Portable units can handle materials up to 2 9/16 in. high, such as crown molding lying flat and 12 in. deep in 90° cross cut.

CS Unitec, Inc.
Norwalk, CT 06850
Sep 05, 2008 With blade stroke of 2 3/8 in., Model 5 1212 0050 will cut 24 in. dia pipe at 90° in one pass. Unit features 1.5 hp air motor that uses 51 cfm air volume at 90 psi air pressure. Certified to ATEX regulations EX 112 GcT5, saw can operate in hazardous atmospheres and environments classified as EX Zone 2. Portable tool uses range of heavy-duty blades from 8-37 in. long, which are available in HSS (M2) and HSS-SL with Molybdenum for cutting carbon steel, SS, and hard alloys.

Hilti Inc.
Tulsa, OK 74121
Sep 02, 2008 Suited for cutting pipe, strut, threaded rod, steel studs, and other miscellaneous steel, Hilti WSR 36-A can also be used for cutting wood with nails, wood beams, treated lumber, plywood, wood composites, or plastics. With 36 V 3.3 Ah CPC Li-Ion battery, it features Active Vibration Reduction technology that reduces vibration by up to two-thirds. Including ergonomic operating controls and comfortable handling, it maintains control when cutting overhead and in difficult to reach areas.

Kalamazoo Machine Tool, Inc.
Portage, MI 49002
Jul 30, 2008 Suited for prototype or limited production work, Model C315/350 features 14 in. HSS blade, 3.5 hp 3-phase TEFC motor, 2-speed spindle, totally enclosed transmission, 24 V controls, and built-in flood coolant. Double vise assembly, with 6¼ in. max opening, provides holding power on both sides of cut for burr-free operation. Machine cuts round shapes up to 4 in. dia at 90° and 3¾ in. dia at 45°; plus square and rectangular shapes up to 3¾ x 5 in. at 90° and 3¾ x 3¾ in. at 45°.

Kalamazoo Machine Tool, Inc.
Portage, MI 49002
Jul 30, 2008 Along with vertical column design for vibration-free sawing, Model C360SA features 14 ½ in. HSS blade; 4 hp, 3-phase TEFC motor; 2-speed spindle, 18 and 36 rpm; totally enclosed transmission; 24 V controls; and built-in flood coolant. Controls facilitate setup and operation, while full guards are removable for cleaning. Cutting capabilities include round and square profiles or solid mild steel as well as rectangular shapes of various sizes.

Pat Mooney, Inc.
Addison, IL 60101
Jun 17, 2008 Designed for fully automatic cycles, Nishijimax CNC Carbide Cutoff Systems feature auto loaders and bar stockers. With NC Saw Spindle Feed Axis, precise feed rate is set automatically and input chip load is maintained. Powder metal saw blade brake enables zero vibration when blade enters cut, while gearbox oil chiller maintains constant gearbox temperature. Offering blade capacities from 2.75-9.00 in., systems feature rigid construction, which enables surface finishes from 40-80 rms.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005-2550
May 12, 2008 Featuring Matrix II bi-metal construction and precision-ground tooth geometry, Ice Hardened(TM) hole saw is suited for metal and wood cutting in wide variety of HVAC, electrical, plumbing, and maintenance/repair applications. It features positive rake angle for fast cutting, radiused tooth back that helps reduce stress on teeth, and deeper gullets that quickly remove chips. Including 49 models, hole saw comes in variety of diameters as well as kits that range from 10-28 pieces.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
Apr 16, 2008 Weighing 33 lb, Model DW7440RS rolling table saw stand is equipped with large rubber wheels and heavy-duty kick stand that allows unit to balance upright. It comes with folding legs with quick release levers that allow users to tuck legs under the stand, detachable brackets for quick disconnect of table saw for loading/unloading, and retractable soft grip handle that slides out. Unit is also available in DW744XRS combo kit with DW744X 10 in. compact table saw.

Klein Tools, Inc.
Lincolnshire, IL 60069
Apr 07, 2008 Designed with ½ in. universal shank to fit all common reciprocating saw tools, Great White® premium and standard reciprocating saw blades can cut through variety of wood, wood with nails, and thin or thick gauge metal. Premium reciprocating blades are 1 in. wide and come in blade lengths of 6, 9, and 12 in., while ¾ and 7/8 in. wide standard blades are available in lengths of 6, 8, 9, and 12 in., and can be used for different cutting applications.

Advanced Machine & Engineering Co.
Rockford, IL 61103
Dec 11, 2007 Model AMSAW® S300 allows for cut lengths up to 30 in. and multi-indexing when length exceeds 30 in. It has capacity of 3.00-12.00 in. and utilizes cermet or carbide tipped, disposable, or re-grindable saw blades with diameters from 24-36 in. Automatic sawing system includes 60 hp spindle motor, and has compact design that incorporates hardened spindle gears with minimum backlash. Unattended sawing is possible with automatic bar loading table.

Esco Tool
Medfield, MA 02052
Nov 26, 2007 Operating on 90 psi air, APS-438 has 3 hp motor; includes standard grease fitting, safety throttle handle, and relief valve; and uses 10 or 12 in. fiberglass reinforced abrasive blades. It is available with chain-mount Esco Single Cut Bracket, which attaches universal air-powered saw to pipe and bar stock up to 4 in. OD for applications requiring multiple cuts in shop or on job site. Bracket enables saw to make square cuts with ±1/16 in. accuracy.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Nov 01, 2007 Featuring diamond-ground carbide teeth for removal of materials, carbide hole saw cuts through wood, ceramic tile, brick and cinder block, cement board, fiber cement board, and plastic. Drop-shaped chip clearance slots allow for chip and dust removal, resulting in uninterrupted cutting. Carbide line has 19 cups ranging from 1 in. to 4 1/8 in.

Doringer Cold Saws, Inc.
Gardena, CA 90248
Oct 12, 2007 Equipped with 14 in. resharpenable high-speed steel blade, Model D-350 is suitable for cutting steel, stainless steel, and non-ferrous metals. It can cut up to 4¾ in. round, 4 x 4 in. square, and 2½ x 6 in. rectangular. Miter table allows operator to miter up to 45°, left and right, without moving cutting material. Saw blade turns at 54 rpm so there is no heat, sparks, or dust.

Esco Tool
Medfield, MA 02052
May 01, 2007 Featuring 3 hp motor, APS-438 uses fiberglass reinforced blades to cut alloyed materials up to 4 in. thick. It is available with PanelHog® Quick-Clamp Assembly, which adjusts to fit all types of boiler tube panel sections. Assembly comes with 2 in. wide steel track sections that attach securely using wedge-style clamps. Cut-line indicator gauge facilitates setup and alignment, permitting clean, straight cuts without rework. Assembly eliminates need for tack welding tabs and hot spots.

Doringer Cold Saws, Inc.
Gardena, CA 90248
Mar 22, 2007 Featuring factory set programmable controls, 14 in. Model D-350 FA makes trim cut to insure accuracy, then follows programmed instructions until completed and automatically turns off. Controller can be linked to communication port or interfaced with other controllers. Material feeder system uses servomotor with absolute feedback and ball-screw linear module. Offering 0.002 in. accuracy/ft of travel, system feeds at 12 ips and has unlimited multi-strokes.

Kalamazoo Machine Tool, Inc.
Portage, MI 49002
Mar 08, 2007 With solid hinge-type design suited for prototype or limited production work, Model C315/350V single-phase saw offers infinite control over blade speeds from 24-105 rpm. Double vise assembly, with 6¼ in. max opening, is mounted on slide assembly for optimal workpiece positioning and provides holding power on both sides of cut for burr-free operation. Components include 14 in. HSS blade, 3-phase TEFC motor, totally enclosed transmission, and 24 V controls.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
Oct 11, 2006 Designed to cut heavy hardwood materials, 10 in. Model DW744X is equipped with 15 A, 2,600 MWO motor and electronic module that helps maintain blade speed and cutting torque. Rack and Pinion® fence system maintains accuracy of cut within 1/64 in. Fence includes telescoping feature that provides 24 in. of rip capacity to right of blade, allowing user to split for 4 x 8 ft sheet goods. Panel perforations on front panel of saw facilitate cooling and airflow to motor.

CDS, Inc. (Custom Downstream Systems)
Lachine, QC H8T2Y3  Canada
Oct 02, 2006 ARC(TM) (Angled Repositioning Cuts) saw is used inline for rendering angled edges on post-extruded profiles. Able to cut from 45-135°, inline multi-angle V-notch saw features 36 in. table travel and cut length accuracy of ±0.020 in. Device includes 18 in. dia carbide-tipped saw blade and 3 hp ac motor. PLC-controlled graphical interface panel enables operators to set cutting angle and cut length, adjust cutting cycle duration, and program variable batch cuts.

Morse, M.K., Co., The
Canton, OH 44711
Oct 02, 2006 Equipped with 72 tooth Metal Devil® carbide-tipped blade, CSM14B 14 in. metal cutting saw makes burr-free cuts in 5 1/8 in. dia and 3¾ in. rectangular metal pipe. Saw features 15 A, 1,300 rpm motor, and steel base provides stability with pre-drilled holes for bolting to workbench. With 6 pre-set markings in base, vice can be set for 45° and 90° cuts.