Messer - MG Systems & Welding, Inc.
Menomonee Falls, WI 53051
Dec 12, 2007 Available for TMC 4500ST Cutting Machine, Heavy-Duty Drill can be combined with normal plasma and oxyfuel cutting for single handling of part. Drill unit is activated and spindle rpm and feed rate are set automatically via CNC commands or manually by operator. Drilling up to 1¾ in. diameter, unit offers 4 in. drill stroke, which is feed-rate controlled to minimize tool breakage. Additional features include 50 taper spindle, automatic tool exchange, and mist coolant.

Messer - MG Systems & Welding, Inc.
Menomonee Falls, WI 53051
Nov 08, 2007 Offered with multiple plasma torch options, EdgeMax features unitized steel table/frame, full capture bearing assemblies, and low-mass aluminum beam driven by dual brushless ac motors. Global S CNC control with Windows® OS, also included, facilitates machine operation for any level of operator. The basic models available are H, for HVAC, blowpipe, and OEM shops; G, for general fabrication shops; and P, for precision plasma cutting.

March Plasma Systems
Concord, CA 94520
Nov 01, 2007 PROVIA(TM) system promotes uniformity of plasma treatment in HDI, flexible, and rigid circuit board processing applications such as desmear, etchback, and blind via cleaning. Gas distribution, vacuum, and electrical isolation technologies ensure uniform processing across each panel within individual processing cell as well as from cell to cell. Also supported, pre-etch conditioning technology minimizes processing time.

Thermal Dynamics Corp.
Chesterfield, MO 63017
Oct 04, 2007 With max pierce and cut capacity of 1.5 in., Auto-Cut® 300 is designed for end users engaged in production cutting up to 1.25 in. who do not require precision plasma cut quality. System is optimized for air plasma cutting of mild steel and can also work with stainless steel and aluminum when used in conjunction with Water Mist Secondary (WMS(TM)) feature. Speedlok® technology facilitates installation and precise locking of cartridges for accelerated process changes.

Messer - MG Systems & Welding, Inc.
Menomonee Falls, WI 53051
Jun 22, 2007 Available as option for plasma and oxyfuel cutting machines, Ink Jet Marker provides alphanumeric labeling with printing in one direction of travel, in addition to line and contour marking for showing bend lines and feature locations. It uses 7 dot head to provide legible characters up to 1 in. tall at speeds up to 17 characters/sec. With operating range of -5 to +45°C and humidity range of 10-90% RH, marker is suited for fabricating environments.

Hypertherm, Inc.
Hanover, NH 03755 0010
May 30, 2007 Combining Powermax® G3 Series(TM) plasma system with Sensor PHC automatic plasma height control, PowermaxEDGE Sensor PHC targets entry-level mechanized air plasma cutting as well as retrofits of existing oxy-fuel and plasma tables. Integrated with specially configured Powermax G3 Series system, Sensor PHC utilizes arc voltage sensing to optimize torch standoff. Customers can choose from 3 Powermax plasma systems. PowermaxEDGE with Powermax1650 cuts up to 88 ipm on ½ in. thick plate.

Messer - MG Systems & Welding, Inc.
Menomonee Falls, WI 53051
May 29, 2007 OL200s Model plasma lifter comes equipped with contact-sense initial height sensing to properly set the pierce height. Model OL200s' small limit switch detects heavily primed plates and underwater cutting requirements, while its magnetic collision sensor prevents torch damage during normal cutting conditions. Roller ball height control is available for thin sheet metal, utilizing pressure application to keep material flat.

Hypertherm, Inc.
Hanover, NH 03755 0010
Apr 27, 2007 Suited for small to medium sized companies, Hyspeed Plasma HSD130 cuts dross-free at 5/8 in. on mild steel, and features production pierce capability of 1 in. with max cutting at 1½ in. Machine includes LongLife® technology and 100% duty cycle. Before release, system is subjected to rigorous and exhaustive life testing procedures equivalent to over 10 years of use in operating environments from 14-104°F.

Hypertherm, Inc.
Hanover, NH 03755 0010
Apr 24, 2007 Integrating Powermax® G3 Series(TM) plasma system with standalone Sensor(TM) PHC Plasma Height Control or EDGE® Ti CNC with integrated torch height control, PowermaxEDGE suits small- to mid-range table applications. With Powermax1650, system cuts up to 88 ipm on ½ in. thick plate. EDGE Ti features 15 in. touch screen monitor and includes drives that support brushless motors up to 250 W. Windows-XP-embedded OS supports shape cutting software including HyperNest CNC for automated nesting.

Thermal Dynamics Corp.
Chesterfield, MO 63017
Jan 30, 2007 Series XT-300 and XT-301 are offered with SpeedLok attachment design, which facilitates user installation and precise locking of consumable cartridge assembly into torch body. To accelerate changing of consumable parts, only one-half turn is required to fully engage and lock cartridge retainer ring onto torch body. SpeedLok design is also available as retrofit by replacing torch head and retainer ring on consumable cartridge.

Hypertherm, Inc.
Hanover, NH 03755 0010
Nov 27, 2006 Powermax30 manual 30 A plasma cutting tool features tapered torch for arc visibility and flexibility in hard-to-reach locations. Able to cut mild steel, stainless steel, and aluminum up to 3/8 in. thick, and sever metals up to ½ in. thick, 20 lb, 12 x 6.6 x 14 in. unit is suited for on-the-spot metal working. Unit features small-angled retaining cap, deflector, post-flow cooling feature, safety interlocks, and built-in parts compartment.

Thermal Dynamics Corp.
Chesterfield, MO 63017
Nov 21, 2006 Featuring portable design, Drag-Gun® Plus offers maximum arc visibility for operator control and includes SureLok® torch, which provides ½ in. genuine cut capacity. Built-in air compressor minimizes moisture content in air supply. Cutting system delivers full cut capacity at 230 V @ 15-35 A, which is continuously adjustable.

ESAB Welding & Cutting Products
Florence, SC 29501
Oct 09, 2006 Weighing just 16 lb, HandyPlasma 250 cuts up to ¼ in. carbon or stainless steel and is portable enough to travel to any job site. Single-phase unit produces 20 A at 20% duty cycle and comes complete with torch, spare parts, air filter/regulator, input power cord with plug, and work cable with clamp. Additional features include side-mounted pressure gauge and automatic air purge when unit powers on.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Sep 27, 2006 Able to connect to any 115-230 V, single-phase power supply, 100 A Spectrum 375 X-TREME(TM) provides cutting capacity of 3/8 in. on mild steel and ¼ in. on aluminum. Internal filter and factory-set regulator eliminate need for operator to adjust air pressure. Once connected to 90 psi minimum air compressor, cutter automatically regulates internal air pressure to torch. Auto-Line adjusts for spikes or losses in input voltage levels while maintaining constant cutting arc.

Thermadyne Industries, Inc.
St. Louis, MO 63017
Aug 25, 2006 Equipped with XT(TM)-301 precision torch technology, Auto-Cut 200 and Auto-Cut 200 O2 are designed for cutting materials of 1 in. or less. While Auto-Cut 200 is optimized for air plasma cutting of mild steel, Auto-Cut 200 O2 is equipped with gas control box that gives it added efficiency for cutting with oxygen plasma. Both are suitable for stainless steel and aluminum when used in conjunction with Water Mist Secondary feature.

ESAB Welding & Cutting Products
Florence, SC 29501
May 24, 2006 Housed in composite case weighing 53 lb, PowerCut® 650 manually cuts 5/8 in. and severs ¾ in. Output is 40 A at 40% duty cycle, 30 A at 60% duty cycle, and 22 A at 100% duty cycle. Torch cable prevents snagging on fixtures and materials, while XT nozzle features extended shape for visibility. PowerCut 650 offers drag or standoff cutting and template-following features that duplicate curves or straight lines. Adjustable output allows operator to tailor current to material being cut.

ESAB Welding & Cutting Products
Florence, SC 29501
May 23, 2006 With single plasma torch, ESAB m3 Plasma System produces high-speed standard plasma cutting, precision cutting and marking, and high-current, thick-plate cutting. PT-36 torch produces cut face with low dross, requiring little secondary clean up, and can function in both dry and water injection modes. When configured for 600 A operation, system can cut and mark material from 20 Ga to 6.25 in. without sacrificing cut quality.

American Torch Tip Co., The
Bradenton, FL 34203 5304
Apr 12, 2006 By eliminating small secondary gas ports, Hypertherm® HT4400® Nozzle avoids spatter build-up. To further decrease spatter, specialized plating can be used when cutting thick materials. Designs are available for most high current applications.

Hypertherm, Inc.
Hanover, NH 03755 0010
Feb 07, 2006 Designed for HyDefinition HD4070 metal cutting systems, HyPerformance torch-and-lead upgrade kits come with 6, 10, or 15 ft torch lead. Each contains 200 A machine torch, HyPerformance torch lead set, and upgrade software, plus upgrade field service bulletin and ID and safety labels. HyPerformance technology enables virtually dross-free, precision cuts consistently throughout full life of torch electrodes and other consumables.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jan 23, 2006 Weighing 97 lb, Spectrum® 1251 has 100 A output and has rated cutting capacity of 1.25 in. On thinner material, such as ¾, and 5/8, and ¼ in. steel, cutting rates rise to 25, 40, and 140 ipm, respectively. Unit also cuts stainless, aluminum, copper, and any metal that conducts electricity. In addition to Auto-Line(TM) power management technology, unit features Auto-Refire(TM) Technology, which automatically controls pilot arc when cutting expanded metal or multiple pieces of metal.