Multiquip Inc.
Carson, CA 90746
May 22, 2006 Powered by 60 hp Deutz diesel engine, CS-7060 walk-behind saw has 36 in. blade capacity and max cutting depth of 15 in. Handles remain level regardless of saw's operating position and are coupled with unit's moving center of gravity for optimal balance in all cutting applications. Clutchless bladeshaft disengaging system can stop and start bladeshaft rotation while engine is running. Unit weighs 1,725 lb and is suited for professional cutters engaged in road work and repair.

Multiquip Inc.
Carson, CA 90746
Jan 05, 2006 Driven by 60 hp Deutz diesel engine, walk-behind Series PS is 34 in. wide without outer blade flanges attached. Stay Level Handles are adjustable and remain level regardless of saw's operating position, minimizing operator fatigue and risk of back injury. Clutchless bladeshaft disengaging system enables bladeshaft rotation to be stopped or started while engine is running. Saw also includes automatic parking brakes and vibration control mounting system.

Dimas North America
Olathe, KS 66061
Dec 10, 2004 Utilizing Cummins 85 hp turbocharged diesel engine, Model RS 8500 delivers travel speeds up to 4 mph with zero turn radius for accurate alignment and cutting. It features 26 in. blade and inline right angle gearbox that uses 14 belts. Upcutting blade rotation lifts slurry from cut. Sealed bladeshaft assembly operates 250+ hours before needing to be greased. Single-handle control facilitates forward and reverse travel, as well as blade raising and lowering.

Dimas North America
Olathe, KS 66061
Sep 08, 2004 Equipped with Cummins 85 hp turbocharged diesel engine and 26 in. blade, RS 8500 has inline right angle gearbox configuration that uses 14 belts to transfer power to drive bladeshaft. Protective sealed bladeshaft assembly operates 250+ hr before requiring grease, and unit suits partial- to full-depth cutting jobs. Riding saw has 4 mph max travel speed, zero-turn radius, and single-handle control for forward/reverse travel and blade raising/lowering.

CS Unitec, Inc.
Norwalk, CT 06850
Apr 13, 2004 Portable, pneumatic Model CSR 150 features 9.5 hp air motor with gearbox that reduces turning speed from 5,250 to 2,900 rpm to regulate blade speed and increase torque to cut hard materials. Crank handle raises and lowers blade for cutting depths up to 7 in. Saw features 1 in. arbor, blade capacity up to 20 in. diameter, solid rubber casters, pointer to follow scribe line, and ¾ in. water connection port for wet cutting applications.

USF Surface Preparation Group, Sawtec
Oklahoma City, OK 73121
Jun 19, 2002 Sawtec® CC-100 Crack Chaser walk-behind crack chasing saw cuts concrete or asphalt to 1 in. depth. Highly maneuverable unit cuts up to 3,000 linear ft/day, depending on material being cut, and features swivel caster and retractable control handle. Available in gasoline and electric models, it uses 6 in. dia dry diamond blade in 0.250, 0.375, or 0.500 in. widths, and operates virtually dust-free when connected to Sawtec Maxi-Vac dust collector.

Internation Surface Preparation Corp.
Fresno, TX 77545
Feb 12, 2002 Sawtec(R) Crac-Vac crack chasing saw operates virtually dust free when routing out cracks and joints in preparation for application of repair compounds. Vacuum housing with internal impeller fan routes dust to reusable dust collection bag. When mounted on dolly, saw can be used for straight-line joint cleanout work, or for cutting artificial grout lines for decorative concrete applications.

Internation Surface Preparation Corp.
Fresno, TX 77545
Jan 17, 2002 Crack chasing and joint cleanout saws rout out random cracks and joints prior to use of repair compound. All concrete cuts can be made with either hand held or walk-behind saws. Crac-Vac routs out random cracks to depth of 1-1/4 in., and can be used for straight-line joint cleanout work. Cutting to 1-1/2 in., walk-behind CC-100 crack chaser cuts up to 8 ft of crack/min. Cut-Vac cuts to 2-1/2 in. JS-90 and JS-110 clean joints at 20 to 60 ft/min.

Internation Surface Preparation Corp.
Fresno, TX 77545
Jan 17, 2002 JS-90 and JS-110 walk-behind cutting saws have upcut rotation, which enables dust extraction and allows quick connection to dust collection system. Using dry diamond blades, both saws cut to maximum depth of 3 in. and clean joints at rate of 20 to 60 ft/min. Saws allow for simultaneous use of 2 blades for spalled joint repairs. JS-90 has 9-hp Honda gas engine, and weighs 160 lbs; JS-110 weighs 180 lbs, and has 11-hp engine.