Genevieve Swiss Industries, Inc.
Westfield, MA 01085
Nov 12, 2009 Ground from premium carbide grades for optimal tool life, UTILIS® Multidec 1600 series is capable of work under .125 in. dia utilizing insert widths from .0019-.108 in. thick with cutting edge repeatability within .0004 in. Geometries can be used for front turn, back turn, micro threading, and cut-off work. Full radius grooving and turning tools are offered in standard increments as well. Available with various coatings, tools accommodate holder shanks down to 7 mm.

Advanced Machine & Engineering Co.
Rockford, IL 61103
Nov 10, 2009 Accommodating max part width of 4 or 5 in., dovetail vise clamp features precision bushing holes that facilitate location of vise. While ½ in. to 13 SHCS and precision dowel screws are used to secure vise on 2 in. grid system, 15 in. dovetail angle holds pre-machined parts securely during machining operations. Vise is available in 5, 8, 12, 16, or 24 in. lengths with up to 12 jaws. Metric locating and mounting hole version is also available.

Hydratight
Red Wing, MN 55066
Nov 04, 2009 Suited for use on hard-to-reach pipe flanges whose integrity must be maintained, QuickFace has self-centering design with adjustable collets and clamps that provides concentric operation and accuracy. Portable tool weighs 15 lb and uses ½ in. cutting tools. Interchangeable lead screws make it suitable for resurfacing damaged raised-face and lens-ring joint flanges to varying finish standards. Rotated by hand, tool employs worm-gear mechanism that provides spiral gramophone finish.

Mate Precision Tooling
Anoka, MN 55303
Aug 07, 2009 Designed for TruPunch 1000 Series punch presses, Trumpf Style Tool Cartridges hold matching punches, strippers, and dies. When loaded with specified tooling components for particular punching job, cartridges are inserted into linear magazine of press for punching. Manufactured of steel and polymer, tool cartridges handle Mate's Next(TM), LongLife(TM), QuickLock(TM), and standard Trumpf style tooling systems.

Hypertherm, Inc.
Hanover, NH 03755 0010
Aug 05, 2009 EDGE Pro supports both oxyfuel and conventional plasma cutting systems. It comes pre-installed with Phoenix® software, including CutPro(TM) Wizard to simplify learning and operation of entire cutting system. Unit includes both analog and SERCOS motion control connectivity, touch screen display, and integrated operator's console and it is suitable for wide range of applications-from basic cutting jobs to most complex.

Dapra Corp.
Bloomfield, CT 06002 0260
Jul 24, 2009 Featuring 45 degree lead angle, RHINO-CARB Toroid inserts suit face milling, profiling, helical interpolation and chamfering applications. They come in ½, 5/8 and ¾ in. IC, with either T-land or dished-face edge. T-land inserts offer reinforced cutting edge for steels, irons and hard milling, while dished-face units provide high-positive cutting edge for stainless steels, high-temperature alloys and gummy materials. Units are also available in round/button, high-feed and square sizes.

Kennametal, Inc.
Latrobe, PA 15650-0231
Apr 27, 2009 Available in Beyond(TM) KCP10 and KCP25 grades for steel and KCU10, KCU25, and KU10 grades for stainless steels and high-temperature alloys, A4 GUP geometry extends tool life. Geometry eliminates bump in bottom of groove during groove/turning applications, optimizing productivity for makers of axles, bearings, valve bodies, and various automotive and aerospace components.

Kennametal, Inc.
Latrobe, PA 15650-0231
Apr 22, 2009 Beyond(TM) grade KCS10 is designed to optimize surface finish results and maximize tool life. It also optimizes chip control, resulting in minimal number of cuts per edge and maximized machine tool speeds. Medium Positive geometry grade is available in 6 styles for use with variety of standard toolholders.

Kennametal, Inc.
Latrobe, PA 15650-0231
Apr 15, 2009 Designed to help increase number of parts per edge, Beyond(TM) screw-on positive insert chip breakers - FP (Finishing Positive), MP (Medium/Roughing Positive), MW (Flat Top) - include 11 grades optimized for steel, stainless steels, and cast-iron applications. All share features such as micro-polished edges that promote edge toughness, post-coat treatment that reduces depth-of-cut notching, and fine-grained alumina layer that enhances coating integrity at higher cutting speeds.

Kennametal, Inc.
Latrobe, PA 15650-0231
Apr 01, 2009 With correct choice of inserts, Mill 1-14(TM) Helical Cutters can be used for medium to heavy roughing and semi-finishing in applications such as contour profiling, slotting, ramping, and plunge milling. Load-Optimized Insert Spacing technology helps optimize performance by finding sweet spot of insert spacing relative to torque and horsepower of machine tool, minimizing vibration. Up to 9 different coolant nozzle sizes are possible for consistent, focused coolant flow.

Kennametal, Inc.
Latrobe, PA 15650-0231
Mar 12, 2009 Available in two- and three-flute styles with choices of corner radii, MaxiMet solid carbide end mills are designed for roughing, semi-finishing, finishing, and super-finishing operations. They are suited for slotting operations up to 1 x D axially and side milling operations up to 0.5 D radial and 1.5 x D axial. Models with three-flute style utilize HARVI(TM) unequal flute spacing to reduce harmonics in cut.

Sandvik Coromant Co.
Fair Lawn, NJ 07410
Mar 05, 2009 Serration Lock head model SL40 offers modular, exchangeable head connection for boring bars in internal machining applications, while SL70 provides modular, exchangeable blades for profile grooving with round inserts and CoroCut® grooving system for lathes, multi-task machines, and VTLs. High-pressure coolant system harnesses pump capability and channels jet through nozzles. Resulting increase in focus and velocity of coolant jet reduces contact between rake face of insert and chip.

Kennametal, Inc.
Latrobe, PA 15650-0231
Feb 24, 2009 Featuring 5 unequally spaced flutes, patented flute form and end geometry, and AlTiN coating, VariMILL II solid-carbide end mill provides single solution for roughing, semi-finishing, slotting, and profiling. With geometries that eliminate chatter and harmonics, mill can slot up to 1 XD, and perform side milling operations up to 0.5 D radial and 1.5 XD axial. Product handles stainless steels, high-temp alloys, nickel and carbon-based alloys, and titanium.

Kennametal Inc., Advanced Materials Div.
Latrobe, PA 15650-0231
Jan 21, 2009 Mill 1-10(TM) performs all common machining applications, such as face milling, shoulder milling, pocketing, slotting, interpolating, and ramping for steels, aluminum, or exotics, all with one common insert style. Multifunctional cutter bodies come in straight flute and helical flute styles; end mills are offered with cylindrical shanks in 3 lengths, Weldon shanks, or as a screw-on style head. Inserts, offered with 6 geometries, feature super positive cutting rake and integrated wiper facet.

Kyocera America, Inc.
Irvine, CA 92614
Jan 05, 2009 Manufactured with PR1025 PVD-coated carbide material, SIGE small-diameter internal grooving system incorporates screw-clamp toolholder that provides maximized chip evacuation. Chip control is handled by GER-M type insert with 3D molded chipbreaker and system also includes GER-A type insert with 8 mm minimum cutting diameter and 2-edge design. Cermet and other coated-carbide grades are also available.

Kennametal, Inc.
Latrobe, PA 15650-0231
Dec 09, 2008 Comprised of 2000+ line items, CVD-coated Beyond(TM) grades feature post-coat surface treatment that optimizes depth-of-cut notch resistance and micro-polishes surface to minimize friction and workpiece sticking. They also feature fine-grained alumina layer to maximize productivity at high cutting temperatures. Product line consists of 5 grades and 22 geometries for steel, 3 grades and 10 geometries for cast iron, and 3 grades and 8 geometries for SS turning.

Kyocera Industrial Ceramics Corp., Industrial Ceramic Products Group
Mountain Home, NC 28758
Dec 05, 2008 Equipped with internal screw-clamp holder for optimal chip evacuation, SIGE Swiss Cutting Tool System uses GER-M type insert with 3D molded chipbreaker for chip control, and GER-A type insert with 8 mm cutting diameter and 2-edge design. PR1025 PVD coated carbide material provides stable machining and extends tool life. Cermet and other coated-carbide grades are also available.

KYOCERA Corporation
Kyoto 612-8501  Japan
Dec 03, 2008 Double-sided negative insert tool system provides 2 cutting edges, with sharp cutting edge equivalent to positive insert edge, promoting stability as well as chip control from roughing to finishing. PVD-coated grades include PR1005, optimized for wear resistance with titanium and free cutting steel, and PR1025, optimized for fracture toughness when working with stainless steel and general use. Toolholder design facilitates multiple tool-post locations without sub-spindle interference.

Sandvik Coromant Co.
Fair Lawn, NJ 07410
Jun 24, 2008 Using 4 cutting edges, CoroMill 690 provides 2D profile milling of titanium components for aerospace industry. Optimized chip flutes reduce chip jamming and each insert pocket contains threaded coolant hole. Unit is suited for circular interpolation from pre-drilled hole, square shoulder milling, and edging and contouring. Integrating iLock(TM) interface, tool is compatible with Capto® toolholders, allowing it to be used in applications with long overhangs and reaches.

TRUMPF Power Tools
Farmington, CT 06032
Apr 28, 2008 Nibbler N500-8 operates in reverse and in 4 directions, enabling users to move tool horizontally toward them or vertically from top to bottom. Weighing less than 9 lb, it features 1,400 W motor and operates in tight spaces. Device can cut through sheet metal up to 0.197 in. thick and SS 0.125 inches thick with working speed of 4.9 fpm. It can also cut through workpieces with 90° bends and double sheeting, such as tanks, containers, and guard rails.