Walter USA, Inc.    Waukesha, WI 53188
Feb 09, 2012 Promoting safety while speeding changeover in grooving, parting, turning applications, models G1511, G1521, and G1551 have respective approach angles of 0° (straight), 90°, and 45° and are optimized for shallow depth grooving to 0.236 in. Straight and 90° versions suit radial/axial face grooving and turning, while G1551 is intended for recesses, undercutting, and copy turning. Formed from Tigerotec® materials, all double-edged inserts offer clamping screw accessible from both sides.

PDC International Corp.    South Norwalk, CT 06854
Dec 15, 2011 Custom-engineered for cutting and perforating operations in tamper-evident banders and shrink sleeve labelers, PDC blade assemblies are manufactured from tool steels for wearability, toughness, flatness, and edge profile uniformity. Blades operate dust-free; eliminate hairs typical of spinning knife systems while delivering precise cuts for months, even under continuous, high-speed conditions; and can be re-sharpened multiple times. Double-edged (reversible) versions are available.

BIG Daishowa Seiki Co., Ltd.    Hoffman Estates, IL 60192
Dec 06, 2011 Intended for plunge-chamfering of holes, fixed-angle C-Cutters include two 30° tools for 16-85 mm dia holes and three 60° tools for 14-65 mm dia holes. Adjustable nozzles direct coolant efficiently to point of cutting, allowing feed rates to 0.6 mm/rev and speeds to 240 mm/min. Also available, Universal C-Cutter enables chamfers as shallow as 5° with minimum hole diameter of 5.5 mm and as steep as 85° with minimal hole diameter of 38.8 mm.

Worksaver Inc.    Litchfield, IL 62056
Nov 02, 2011 Suited for compact tractors with non-quick attach buckets, clamp-on snow blades features 3/8 x 6 in. cutting edge of 1044 steel and ability to angle right or left. Attaching frame slides over bucket cutting edge, and frame extends under bucket bottom for complete system support. Available in 5 and 6 ft models, blades are suited for use in removing snow from driveways or small parking areas and remove with chain and turnbuckle system.

Widia Inc.,    Latrobe, PA 15650
Oct 14, 2011 Featuring advanced VDS point geometry, VariDrill(TM) minimizes chipping on cutting edge and delivers extended tool life across range of materials, including steels, stainless steels, cast irons, non-ferrous materials, and high-temperature alloys. Its point and flute design enables chips to roll smoothly, minimizing friction, heat, jamming, and scratching. Available in 3XD, 5XD, and 8XD lengths as well as coolant-through and solid options, VariDrill provides optimum hole finish.

Walter USA, Inc.    Waukesha, WI 53188
Sep 20, 2011 Prototyp ConeFit(TM) solid carbide milling system is available with spade-type compression molded, changeable cutting heads suited for copy and plunge milling, chamfering, centering, and spot-facing holes. For graphite machining, PCD coated N50 variants are available as 4-flute cutters with corner radius and as double-edged, ball-nose end mills. Protoomax(TM)ST end mill provides maximum metal removal during roughing and finishing of steel, including stainless, and four-flute variant is also offered.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Aug 04, 2011 Made from corrosion-resistant C-4 micrograin carbide, Ply Veneer Worker Blade delivers rip and cross cuts of 2-sided plywood, finished or unfinished. It also provides finish-quality cross cuts on hardwood laminated sheet products and natural wood of all types. Measuring 10 in. in diameter with 10° hook and 70 teeth, blade performs flawless cuts without splintering or fuzz and without chip-outs on either top or bottom surfaces.

Seco Tools Inc    Troy, MI 48083
Jul 13, 2011 Suited for use with small and micro parts, MDT 2MM has 0.078 in. wide cutting edge and Secoloc insert clamping system. There are 2 sizes of inserts and toolholders available. For Swiss machining applications, MDT19 inserts are shaped to provide insert indexing accessibility even when space is restricted. With longer reach, larger toolholders, and broader product range, MDT28 size offers solutions for general machining applications and allows parting off of bars up to 2 in. dia.

ICO Surface Coatings    Brunswick, OH 44212
May 17, 2011 With ViTA-Nano coating, circular ferrous and non-ferrous saw blades offer extended life because edges are protected from steel build-up. Nanocomposite PVD coating, with thickness of 1-4 µm, offers hardness of 4,500 HV, 0.45 coefficient of friction, and maximum working temperature of 2,200°F.

Channellock, Inc.    Meadville, PA 16335-0519
May 11, 2011 Measuring 8.8 in. long and weighing 1.1 lb, No. 87 Rescue Tool features hardened cutting edges designed to shear through soft metal and standard battery cables. Narrow jaw fits into tight spaces, while tapered pry wedge helps firefighters, first responders, and EMTs open doors and windows. Additional features include gas shut-off valve slot and spanner wrench, with latter able to tighten/loosen up to 5 in. hose couplings.

IRWIN Industrial Tool Company    Wilmington, OH 45177-0829
Apr 15, 2011 Available in packs of 5, 10, 50, and 100, 4-Point Snap Blade enhances accuracy and productivity during work for tradesmen using utility knives by giving them instant access to sharp new point without need to change blades. Product snaps on score to create 4 cutting points, while 4 notches on blade's top edge allow for full blade extension despite of how many tips have been snapped off previously.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Mar 18, 2011 Suited for use with most table, circular, and panel saws, 12 in. dia Woodworker II blades are available with 1 or 5/8 in. bore or can be customized to end-user specifications. Products are engineered from corrosion-resistant C-4 micrograin carbide and have 1/8 in. kerf. Suited for making clean cross cuts, 48-tooth design facilitates feeding, and sharp teeth points have 25° bevel. Hand-straightened for perfect flatness, blades have side runout of ±.001 in.

Hyde Industrial Blade Solutions    Southbridge, MA 01550
Mar 11, 2011 Made of M2 high-speed steel, Hose Hog(TM) Hose and Tube Cut-Off Blades slice materials such as wire-reinforced hydraulic hose in automated manufacturing operations with little to no post-cut cleanup. Hose Hog Hand Knives can hack, pry, cut, shear, trim, slit, or slice materials, including hydraulic hose. They are precision ground for max cutting leverage and reduced binding through cut. Line consists of 10 machine blades and 3 hand knives in variety of standard shapes and sizes.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Feb 18, 2011 Designed specifically for Kapex KS 120 Sliding Compound Miter Saw, Signature Line Chop Master Blade features 10.2362 in. diameter and 1.1811 in. bore. Unit is made with corrosion-resistant C-4 micro-grain carbide, 90 carbide teeth, and angled carbide points. Designed to run cool and cut smoothly at any angle without bottom splintering, side scoring, or vibration, blade can produce delicate pre-finished crown molding, picture frame molding, and composite molding.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Feb 10, 2011 Application Specific SAWZALL® blades feature tooth fracture protection Nail Guard(TM) and Fang Tip(TM) designs, which keeps nails out of gullets and bites into wood on first contact. Flush Cut blade addresses window and door cut-out applications, and has Double Truss design that guides blade for straighter window cut-outs. Low profile Rough-In Sawzall blade cuts holes of 2 1/8 in. dia, and has optimized 7 3/8 in. length that allows blade to cut holes through double top plates.

Hyde Industrial Blade Solutions    Southbridge, MA 01550
Feb 03, 2011 Optimizing piece per yield for meat and poultry processors, MeatMiser(TM) Food Processing Blades are manufactured with arcuate or swooping teeth and beveled edges, which replace scallop edge blades. Arcuates enter cut gently along long arc without ripping into food to be processed, slicing meat cleanly. Made of 420 grade stainless steel and heat treated, blades come in 5.86, 6, 7.188, 10, and 10.63 in. diameters for various processing machines.

Hyde Industrial Blade Solutions    Southbridge, MA 01550
Dec 14, 2010 Constructed of stainless steel, Hyde IBS Seafood Processing Blades accommodate needs of fresh and salt water seafood processing. Microfinish lends to corrosion resistance while also reducing friction during cut and tendency of fish and waste products to stick to blade. There are 29 sizes available from 3.54-11.81 in., and these circular blades can be re-sharpened. Special edge coatings may also be applied to increase cutting edge hardness.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Dec 02, 2010 Intended for use by advanced woodworkers, Duraline Tenoning Blade facilitates and accelerates production of clean, reliable mortise and tenon joints. Tenon can be created in 2 steps, and perimeter concentricity and side runout are rated at ±.001. Suited for use with most all types of tenoning jigs, product is engineered from corrosion-resistant C-4 micrograin carbide and has 60 teeth as well as No. 6 grind with alternate top bevel/raker.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Oct 29, 2010 Able to handle prototype as well as production work, UTILIS® Multidec® 1600 series is comprised of micro grooving and turning tools ground from premium carbide grades. Turning tools, designed for small Swiss machines, cut .0019-.108 in. thick grooves with .0004 in. repeatability. Products meet design and production requirements of micro medical devices, dental implants, electronic, and other micro components utilizing micro grooving.

Stellram    La Vergne, TN 37086
Oct 07, 2010 Stellram® 7792VXE16 high-feed shell mill cutter provides high-speed metal removal in titanium and titanium-based alloys, nickel-based alloys, and cobalt-based alloys. Tool directs cutting forces axially into spindle, minimizing spindle wear. Able to take repeated shallow depths of cut, unit is capable of face milling as well as pocketing, slotting, and plunging. It is compatible with various insert grades to meet application needs.