Kennametal Inc.    Latrobe, PA 15650
Jan 29, 2013 Specifically engineered for titanium and stainless steel applications, KSRM™ Series supports pocketing, profiling, ramping, and plunging with up to 1 mm fz. Inserts are available in 12 and 16 mm dia for KSRM face mills and screw-on, Weldon®, and cylindrical KSRM end mills. SGE styles are designed for medium and heavy milling tasks, while ELE inserts should be used at low cutting forces and to avoid edge build-up. In addition, 20 mm dia insert is available for KSRM face mill models.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jan 25, 2013 Intended for roughing to semi-finishing, CoroMill 419 is available in 1.25–4 in. dia range with various insert grades and geometries to accommodate needs of most materials and applications. Through coolant on all cutters promotes wet machining efficiency, while compressed air cooling option aids chip evacuation in deep cavity milling and helical interpolation. Features ensure productivity in applications requiring light cutting action and extended tool life.

Datron Dynamics, Inc.    Milford, NH 03055
Jan 24, 2013 Featuring 69 x 69 in. footprint, M8 Cube is equipped with 3 kW, 40,000 rpm, liquid-chilled spindle for heavy machining. Brushless direct drives provide feed rates up to 866 ipm, while HSK-E 25 tool holders offer less than 1 micron run out. Built in to gantry and control, operation indicator lights provide visible machine status eliminating need for additional light sticks. Machining center is controlled by Windows-based software that can integrate with third-party software and automation systems.

AIRAM Co. Ltd.    Covington, OH 45318 0009
Jan 22, 2013 Using servo drive, pneumatic flying cut-off press provides flexibility to perform stamping and roll forming operations as well as extrusion applications. Operators can stamp, punch, cut, or pierce variety of materials, including steel, aluminum, plastic, cardboard, and rubber. Servo drive also helps accelerate line speed. Able to be used as part of stamping work cell or anchor front or back of roll forming line, press offers production uptime of 98% and requires minimal maintenance is minimal.

Walter USA, Inc.    Waukesha, WI 53188
Jan 17, 2013 Designed for use with Walter BoringMEDIUM system for 20–153 mm drilled holes and Walter BoringMAXI system for 150–640 mm drilled holes, E47 Counterboring Insert Geometry provides optimized chip breaking and removal properties that result from universal chip groove, positive rake angle, and strong cutting edge with 0° chamfer. Depending on shape of insert and size, depths of cut from 2.5–6.3 mm are possible. Inserts are aimed at material groups ISO P and K as well as ISO M and ISO S.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Jan 16, 2013 Operating on 90 psi air, ATLAS® RIV 990 promotes installation of full or half-hex bodied blind threaded inserts. Tool accommodates interchangeable noses to correspond with hole-size requirements. Upon proper hole conversion, variety of metric blind threaded inserts can be installed permanently in aluminum, steel, or stainless steel panels of any hardness and as thin as .020 in. Inserts can be specified in thread sizes from #8-32 to 5/16-18 and M4–M8, and in flat, thin, or countersunk head styles.

Hypertherm, Inc.    Hanover, NH 03755 0010
Jan 14, 2013 Featuring respective cut capacities of ¾, ½, and 3/8 in. for mild steel, stainless steel, and aluminum, HyIntensity® Fiber Laser HFL030 comes with pre-developed cutting processes and all necessary components for table integration/operation. This 3 kW fiber laser system, optimized for cutting applications, is designed to minimize maintenance requirements.

General Pipe Cleaners    McKees Rocks, PA 15136
Jan 11, 2013 Combining fold-down handle, stair climbers, truck loading wheel, and frame on 10 in. wheels for portability, Metro™ Power Drain Cleaner handles roots and other difficult stoppages in 3–6 in. drain lines using 75 ft of 5/8 in. Flexicore® cable, which consists of heavy-duty wire tightly coiled around 49 strand aircraft-type wire rope. For smaller jobs, users can switch to 100 ft of 9/16 in. Flexicore® cable. Machine's narrow profile facilitates handling in tight places and loading into truck.

Behringer Saws, Inc.    Morgantown, PA 19543
Jan 11, 2013 Designed to cut pipes and solid materials from 0.75–24 in. in diameter, Model HBP-610A features horizontal band arrangement and cast iron, dual column frame, which utilizes positive hydraulic downfeed, eliminates vibration, and provides rigid support for blade tensioning. Frequency-controlled drive delivers cutting speeds from 62–426 ft²/min. Downfeed power and saw blade pressure are monitored by automatic pressure sensing system, which automatically makes blade pressure adjustments as needed.

Newport Corp.    Irvine, CA 92606
Jan 10, 2013 Designed for 24/7 operation in manufacturing environments, Pulseo® 532-44 may be used to perform high-speed, precision cutting and drilling of semiconductors, glass, electronic packages, PCBs, ceramic substrates, and other microelectronics. Laser features greater than 44 W average 532 nm output power, with 30 ns pulse widths for minimizing undesirable heat damage to processed material. Less than 3% pulse-to-pulse stability promotes optimal process reproducibility and yields.

Reed Manufacturing Co.    Erie, PA 16512
Jan 10, 2013 Designed for manual cuts on 40–42 in. steel pipe, RC42S Rotary™ Cutter tightens via included wrench and requires 11.8 in. clearance. Pipe snaps off squarely once operator works RC42S manually around cut zone. For 2–4 in. steel, cast iron, or ductile iron pipe, LCRC4 Low Clearance Rotary™ Cutter features heavy-duty construction and requires 4 in. clearance around pipe to make cut. Proprietary cutter wheels are used in both models.

Bystronic, Inc.    Elgin, IL 60123
Jan 08, 2013 Available with ByLaser 4400 or ByLaser 6000 CO2 laser source, BySprint Pro 3015 offers accelerated pierce times across full material range. Automatic nozzle changer provides up to 40 nozzles and CNC controlled automatic nozzle centering. For economic efficiency, system features wear-free solid state power supplies and magnetic-bearing turbine. Electrical power consumption is minimized because excitation is automatically switched off when protective door is opened and when machine is at standby.

Spectra-Physics, Inc.    Mountain View, CA 94043
Jan 08, 2013 With greater than 44 W average 532 nm output power, Pulseo® 532-44 features short 30 ns pulse widths for minimizing undesirable heat damage to processed material and less than 3% pulse-to-pulse stability for maximum process reproducibility and yields. Laser is suited for high-speed precision cutting and drilling of semiconductors, glass, electronic packages, PCBs, and ceramic substrates.

RIDGID    Elyria, OH 44035
Jan 07, 2013 At 13.5 lb and 11.5 in. long, 238-P helps plumbers and mechanical contractors cut soil pipe in hard-to-reach spaces overhead and below ground. Product is designed for use with ½ in. impact driver and incorporates chain that can cut up to 8 in. dia no-hub cast iron, service weight cast iron, clay pipe, and up to 6 in.dia concrete pipe. Additionally, 2-directional operation lets users score pipe before cutting for cleaner result, and torque limit protects unit from overloading.

Quaker Chemical Corporation    Conshohocken, PA 19428
Jan 07, 2013 Designed for machining of aluminum alloys, QUAKERCOOL® 7000 ALF BAF machining and grinding coolant is water soluble as well as boron-free and amine-free. Low alkalinity properties aid in prevention of staining, while wetting abilities result in optimized cutting performance and microbiological growth control without biocide addition. Product also provides cleanliness on tools and machines with good detergency.

Syneo    West Palm Beach, FL 33404
Dec 28, 2012 Equipped with UV laser utilizing 355 nm wavelength, Accu-Lase V200 supports precision cutting of polyimide tubing and complex hole making as well as polymer marking. System handles ODs from 0.012–0.150 in. and input lengths from 5–72 in. Providing marking speeds of 5–1,000 mm/sec, machine features automatic mandrel insertion, vision system for viewing of process, and automatic feed from batch loading.

eurolaser GmbH    Lueneburg   Germany
Dec 19, 2012 New Generation 3XL-3200 eurolaser, able to handle textile sheets up to 3,210 mm wide, employs conveyor system that guides roller cleanly and without distortion to working surface. Removal table enables and facilitates parts removal from 3 sides. If required, leftover fabric can be automatically rolled up again after cutting. Also included, software enables support of transfer of data from other system providers' data – Lectra, CDR, EPS, HPGL, AI – as well as workflow enhancements.

Hyde Industrial Blade Solutions    Southbridge, MA 01550
Dec 10, 2012 Converting rolls of materials into sheets or smaller sections via crushing versus cutting action, Score Slitter Blades are designed to OEM specifications for various machinery brands and manufactured of 52100 steel; other alloys are available. Perforator Blades, used for finishing, feature machine-ground notches and are made to order based on tie length, cut length, and number of teeth required for application. Blades come in 1–15 in. dia tooth configurations with notches down to .005 in.

Hypertherm, Inc.    Hanover, NH 03755 0010
Dec 03, 2012 For cutting stainless steel less than ¼ in. thick, Hypertherm® HPRXD® Systems feature HDi technology, which applies vented nozzle process to create extremely sharp top edge quality, shiny surface finish, and optimal angularity with minimal angle variation. PowerPierce® technology and controlled motion pierce process combine to enable piercing on stainless steel up to 4 in. thick. In addition, set of parameters delivers optimized fine feature cutting on mild steel up to 1 in. thick.

NLB Corporation    Wixom, MI 48393 2824
Nov 28, 2012 Torrent™ 50 tank cleaning head, delivering water at 600 hp, is rated for pressures up to 20,000 psi and flows to 50 gpm. Unit features 2 high-velocity water jets that spin vertically while head spins horizontally, allowing for 3D coverage of tank or reactor interior to remove hardened resins or plastics. Stainless steel body is rugged and corrosion-resistant, while magnetic brake system allows for control of rotational speed.