Surface Grinders

Machinery & Machining Tools

Rotary Surface Grinder produces 8 Ra or better micro finish.

October 1, 2014

Along with fixed spindle (10 hp) and rotary table that help maintain close tolerances (±.0001) and fine finishes, Okamoto PRG8-DXNC has electromagnetic chuck and automatic demagnetizer with 31.5 in. working diameter, ±5° table swivel, and 20–150 rpm rotary speed. This CNC surface grinder, built on rigid Meehanite cast base, has no table overhang as to promote accuracy and repeatability. Graphic and conversational, programming input accommodates multi-step (up to 4) grinding in one set up.
Read More

Machinery & Machining Tools

Walk-Behind Floor Grinder is capable of dust-free operation.

July 23, 2014

With 20 A/110 V motor and no-load speed of 1,380 RPM, heavy-duty EBS 235 removes epoxy, paint, and other hard coatings from such surfaces as concrete, screed, and natural stone before new paint or coatings are applied. This 9 in., 84 lb unit with height-adjustable chassis features dust extraction port and brush shield that allow for dust-free grinding when attached to industrial vacuum system. By removing side portion of dust guard, operators are able to grind directly to edge of work area.
Read More

Machinery & Machining Tools

Surface Grinder can be used in diverse range of applications.

January 22, 2014

Used for removing paint, thin set, adhesives, mastics, and other floor coatings, 55 lb SG7 features high-speed polisher and utilizes 7 in. dia diamond segment discs. Dual gas shocks dampen grinding forces and help produce level surfaces, while ergonomic frame lets operator work in fully upright position. Handle offers vertical height adjustment and allows use from either side of machine. When paired with Pro Polish™ system, grinder can also be used for concrete polishing applications. Read More

Machinery & Machining Tools, Materials & Material Processing

Surface Grinder is designed for mold and die manufacturers.

November 9, 2011

Capable of basic surface, slot, side face, and profile grinding with optimal straightness, flatness, and mirror finish over 2,000 x 1,000 mm area, ACC-208CHiQ double column, gantry-type surface grinder features 500 mm dia x 100 mm wide wheel driven by 22 kW motor and shift-plunge grinding cycles. Overhead dressing for rough grinding, combined with table top dressing for finishing, reduces cycle times, while touchscreen iQ control combines CNC technology and GUI for efficient operation. Read More

Portable Tools, Machinery & Machining Tools

Angle Grinding System features optional vacuum.

April 27, 2010

Suited for grinding small areas and vertical applications, 5 in. Angle Grinder Surface Prep Kit includes WE14-125 Plus variable speed angle grinder and dust control shroud. Small angle grinder is equipped with 12.2 A motor, offering 1,400 W power, 29.2 lb-in torque, and variable, no-load speed of 7,000-10,500 rpm. When used with optional vacuum, such as Metabo ASR 2050, Surface Prep Kit helps protect users from silica dust exposure in accordance with OSHA regulations. Read More

Machinery & Machining Tools, Materials & Material Processing

Meat Plate Grinders are engineered for operational longevity.

March 22, 2010

Specifically intended for meat plate sharpening within meat processing industry, rotary table surface grinders feature heavy cast iron machine construction that lends to long-term service and reliability. Standard features such as automatic feed control and flood coolant flow prevent alteration of meat plate metallurgy. Alternate fixturing options and variety of conventional and super abrasive grinding wheels are available. Read More

Machinery & Machining Tools

Punch and Die Grinder resurfaces turret press tooling.

March 22, 2010

Featuring 42 x 48 in. footprint, Model PDG has center-mounted rotary fixturing that holds punches and dies up to 6 in. in diameter with fixture enhancements available to sharpen dies up to 8 in. Punch fixturing allows sharpening of straight as well as shear angle punches with up to 10° pitch. Providing semi-automatic operation, grinder includes CBN superabrasive grinding wheel and 5 hp vertical spindle motor with through spindle and external coolant flow to keep parts cool. Read More

Machinery & Machining Tools

Rotary Table Surface Grinder is optimized for precision.

March 22, 2010

Suitable for production as well as tool room R/D applications, models IG 180 SD and IG 280 SD integrate mist collection and coolant filter systems that enable clean, self-contained operation. Machines respectively occupy 3 x 5 ft and 76 x 64 in. footprints and employ operator interface that facilitates machine control. Data is conversational, requiring no CNC programming experience on part of operator. Read More

Machinery & Machining Tools

Machine offers creepfeed, surface, and profile grinding.

October 1, 2008

Providing creepfeed, surface, and profile grinding in multi-axis configuration and GE-Fanuc® intelligent terminal CNC control from 2,025 x 1,500 mm footprint, Dominator 624 CNC Machine is suited for machine shops where space is at premium. By using cuboid machine bed design and mounting wheelhead on carrier assembly to provide 'Z' axis, work table then moves vertically to provide 'Y' axis. It offers grinding length of 600 mm x grinding width of 200 mm from 400 mm work table. Read More

Machinery & Machining Tools

Surface Grinder withstands harsh environments.

March 4, 2008

Available in multiple lengths ranging from 60-240 in., KGDM Vertical Spindle Surface Grinder comes equipped with through spindle coolant as standard. Carriage travel incorporates linear bearing technology, while CNC control of grinding stone down feed enables resolution up to 0.0001 in. Offering 360° rotation, magnetic chuck allows specialty fixtures to be mounted to backside of magnet while maintaining precision ground surface on magnet face. Read More

Machinery & Machining Tools

Profile Grinder performs ultra-precise work.

September 12, 2006

Surface and profile grinding machine, Jung J 630, is suited for applications where it is necessary to produce micron-precise contours and profiles or ultra-fine finishes. PA 37 dressing system allows continuous profile dressing of grinding wheel, simultaneous with grinding process, while double V guide construction provides rigidity and stability. Grindable workpiece surface including wheel width is 600 x 305 mm, cutting speed is 35 m/s, and max load is 130 kg. Read More

Portable Tools, Machinery & Machining Tools, Cleaning Products & Equipment

Planetary Grinder minimizes swirl marks.

May 24, 2006

Three-headed Model BMG 435 is designed for multipurpose use on concrete, terrazzo, natural stone, and wood surfaces. On concrete, unit cleans and prepares surface, levels uneven areas, removes coatings, cleans glues and mastics, or polishes. Machine cleans dirt, grease, and scuff marks from terrazzo or natural stone, or grinds and polishes. For wood, BMG 435 cleans paint and coatings, and sands surface for refinishing. It is offered in 220 V single phase or 110 V models. Read More

Machinery & Machining Tools

Surface Grinder delivers ergonomic operation.

April 14, 2005

Hum-B allows users to stand upright during operation. Equipped with 6,000 rpm Dewalt grinder, 12-segment diamond wheel, and 5 in. caster wheels, unit features gas-filled shocks for level grinding. Product, suited for use on concrete, stone, or masonry, is also equipped with 150 W halogen light, 2 in. vacuum port, and Dust Grabber shroud, providing 99% dust-free performance with no suction lock. Read More

Machinery & Machining Tools

Profile Grinder is suited for precision applications.

January 13, 2005

Equipped with Siemens 840 D CNC control, Jung J 630 surface and profile grinder incorporates double V guide construction and PA 37 CNC system that allows continuous profile dressing of grinding wheel. Spindle, hydraulic system, and diving column enable micron precision during grinding process. With max load of 130 kg, grinder has 600 x 305 mm grindable workpiece surface and cuts at speeds to 35 m/s. Grinding wheel has 300 mm dia, width of 30 mm, and 76.2 mm ID. Read More

Machinery & Machining Tools

Surface and Profile Grinder suits high-volume production.

October 6, 2004

Featuring GE Fanuc 18i control, Blohm Planomat 408 HP, in split splash guard configuration, keeps doors open and lets operator exchange parts while machine goes through dress cycle. Linear guideways in all axes consist of 6-row ball and 4-row roller bearing systems that provide stick-slip free positioning. Work area is entirely enclosed to contain high-pressure coolant, and grinding range is 800 x 400 mm. Table clamping area is 1,200 x 400 mm. Read More

Machinery & Machining Tools

Single-Head Surface Grinder suits smaller-scale projects.

June 4, 2004

Suited for floor preparation projects, SG12/E is powered by TEFC 1.5 hp electric motor and features one rotating disc with 12 in. working width. It has top disc rotation speed of 250 rpm and is built for portability with folding handle. Able to be navigated through stairwells, unit has unitized, welded-steel plate frame that includes integral bail design, self-aligning ball bearings, and heavy-duty V-belt reduction drive system. Read More

Machinery & Machining Tools

Surfacing Grinder features comprehensive dust removal system.

July 19, 2002

Model 1773AK 5 in. Concrete Surfacing Grinder features 10 A motor operating at 11,000 rpm, diamond cup wheels, and brush-ring for dust-free work. Epoxy coated field windings, double sealed ball bearings and 2 lip-sealing protective rings protect against dust contamination. Built-in dust chute connects to vacuum hose for efficient debris removal. Wrap-around side handle for easy handling and multiple hand positioning optimizes any working angle. Read More

Machinery & Machining Tools

Surface Grinders feature computer numerical control.

July 15, 2002

FREEDOM Series consists of 3-axis Seimens 810 (FREEDOM I) and 840D (FREEDOM II) powered surface grinders with 8 x 18 in. table capacity and optional CNC over-the-wheel form dresser. Units feature menu driven, Ethernet, RS-232, or floppy drive for file management and programming. They can also be configured with CNC rotating or indexing fixture. Read More

Portable Tools, Machinery & Machining Tools

Surface Grinders have cast iron tables, saddles, and bases.

April 26, 2002

Equiptop Surface grinders employ heavy-duty walls and reinforced ribs. Machines are available with 8, 12, and 14 in. wheel dia. Equiptop handfeed models (CSG-618/818) feature timing belt table drive with handwheel indexing to 9 positions without backlash. Hydraulic models utilize hydraulic drive system with some motor driven cross movement. Fully automatic models have programmable hydraulic table speed control and rack and pinion table drive. Read More

Machinery & Machining Tools

Grinder is programmable to 10 millionths accuracy.

January 23, 2002

EZ-Surf XA Surface Grinder combines Newall Microsyn digital linear encoders with software specifically designed to interface with scales. It permits machinist to operate in manual, semi-automatic or fully automatic modes. EZ-Surf comes with 7 in. wheel with 8 in. wheel capacity, integral 2-diamond wheel dress, 3 in. diameter spindle, and 1.5 HP continuous-duty spindle motor. It provides 100 ipm rapid transverse for vertical y-axis and cross feed z-axis. Read More

  • 1