Dynabrade, Inc.
Clarence, NY 14031
Mar 17, 2008 Featuring ergonomic, pencil-type shaft for operator comfort and control, air-powered, 100,000 rpm Pencil Grinder is turbine-driven with rear-exhaust and no wearable gears, vanes, or blades. Tool speed is adjustable with twist of on/off switch. Available with 1/8, 3/32, 1/16, and 3 mm collets, grinder includes stainless steel tool housing, ceramic bearings, and tactile cues on shaft end that alert operator to rotating area.

ANCA Pty Ltd
Bayswater North VIC 3153  Australia
Feb 18, 2008 Designed for grinding cutting tools with diameters down to 0.5 mm, Model RX7SP includes linear scales for positioning accuracy of machine axes, V-block clamp, PLX pallet loader for unattended operation, and 3.5 kW HSK spindle that gives both face and taper contact on arbor for optimal wheel runout. With iBalance software, grinding wheels can be accurately balanced without taking them off machine.

Saar-Hartmetall LLC
Covington, KY 41017
Nov 09, 2007 Utilizing indexable carbide inserts with various coatings, Gerima SKF Series mills carbon steel, stainless steel, aluminum, copper, or plastic of any thickness. Tools are designed to mill straight edges, contoured edges, and cutouts with little or no chatter. Equipped with variable speed 110 V motor, tools accept various interchangeable mill heads of any angle from 10-80°, and are capable of chamfering up to 15 mm width.

Hitachi Power Tools
Norcross, GA 30093
Aug 22, 2007 Equipped with 15 A motor, 7 in. Model G18SCY and 9 in. Model G23SCY deliver no-load speed of 6,000 rpm. User Vibration Protection technology minimizes full-load tri-axial vibration, reducing end user fatigue. Tools have vibration absorbing main handles, which are connected to motor housing with moving joint mechanisms and padded dampers. To make grinders comfortable for both right and left handed users, on/off switches are center mounted on top of grinders.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Aug 07, 2007 TASKMASTER TM8500 series in-line grinders reduce sewage and sludge solids to fine particles directly in pipeline systems, featuring 2 counter-rotating stacks that intermesh at close clearance to shear and shred solids into fine bits. Cutter Cartridge Technology and drop-in housing allow for removal of cutting mechanism for periodic maintenance. Supplied for open channel or in-line applications, they are available for 4-24 in. pipe sizes.

Dynabrade, Inc.
Clarence, NY 14031
Jul 10, 2007 Available in 3,400 or 18,000 rpm versions, Extension Die Grinders are 1 hp straight-line air tools that work within long pipes, castings, and other extended reach applications. Products feature rear exhaust air motor and come in 19¾, 28 1/8, and 36½ in. lengths. Constructed of steel, each tool extension is designed for minimal vibration and does not spin during use. Safety-lock lever prevents accidental start-up of tool, and operating noise is 80 dB(A).

Accura Technics LLC
Keene, NH 03431
Apr 17, 2007 MicroTol(TM) features configurable work area that is totally enclosed for coolant containment. Standard X-axis travel is 8 in., while standard Z-axis travel is 4 in. Work area consists of a hydraulic chuck supported by Accura(TM)'s hydrostatic work spindle and hydrostatic bearings that provide added damping. The 20,000 rpm air bearing wheel spindle is rigidly mounted to machine base on micro-adjustable column, and grinding is performed with metal bond diamond wheel.

Ingersoll-Rand Co.
Annandale, NJ 08801
Feb 06, 2007 Engineered for automotive and maintenance professionals, 14.4 V IQV Models GS25 and GR25 are straight and right angle grinders with max free speed of 27,500 rpm and 20,000 rpm, respectively. Motors deliver 0.35 hp for tough grinding applications. Continuously monitoring tool operation and motor temperature, microprocessor pulses motor on and off if tool begins to overheat. IQV Grip offers twist-to-lock battery interface that locks battery securely in place.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Dec 08, 2006 Equipped with Electronic Kickback Protection, 5 in. Model 1803EVS and 6 in. Model 1806E are designed to shut off if wheel gets in bind situation. If slide switch is in ON position while unplugged or power source is interrupted, restart protection keeps tool shut off until user actively switches grinder OFF and back ON again. Model 1803EVS offers variable speed capability of 2,800-11,000 rpm, while Model 1806E provides speeds of 9,300 rpm at 12 A.

Gullco International Inc.
Cleveland, OH 44146
Nov 30, 2006 Comprised of models for ¼-2 in. thick plate as well as models that bevel underside of plate, portable KBM series produce cleanly machined bevel angles of 22 1/2° through 55° with no thermal distortion on mild steel, stainless steel, and aluminum. Adjustable-height, self-aligning, spring-loaded caster wheel assembly enables self-propelled operation along any length of plate, maintaining uniform bevel and consistent root face.

Monza Corp.
Sparta, NJ 07871
Nov 17, 2006 With Fanuc control, Model CNC 1 is capable of storing program parameters for many different part numbers while also controlling Constant Surface Speed option. Fanuc CNC controls the combined Regulating Wheel and Work Rest slides via brushless digital servo drive motor with encoder positioning feedback. Slide movement is actuated via planetary roller satellite screw offering 2 mm pitch. Model CNC 1 is available in 6 models with grinding wheels from 12-24 in. dia.

Suhner Abrasive Power Tools
Rome, GA 30162
Nov 07, 2006 Comprised of 5 models with various speed ranges, K-Series features low-noise gears and abrasion-resistant carbon brushes. Constant ventilation shaft across units enables constant volume flow, while air gap and outer diameter of stator are cooled evenly. Digitally constructed, steady power electronics regulate engine speed and keep speed constant even under high loads. Starting current limitation, overload protection, and warm restart protection are provided.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Nov 06, 2006 Comprised of 4½, 5, and 6 in. models, 1800 Series features optimized motor commutator and brush system, which minimizes heat buildup. Select models incorporate channels at top, bottom, and sides to keep dust and debris from contaminating inner workings of tool. Pulling clean air from back of tool as opposed to front, channels direct airflow where it is needed most for maximum motor cooling.

Heck Industries, Inc.
Hartland, MI 48353
Oct 10, 2006 Suited for weld preparation beveling, Model 9000 Bevel Mill uses standard carbide inserts in milling cutter for beveling most machinable materials including mild steel, aluminum, and stainless steel. Machine is self-supporting on workpiece and is hand fed by operator along edge of plate at up to 6 fpm. Unit offers variable angle adjustments from 15-45°.

Union Process, Inc.
Akron, OH 44313
Sep 20, 2006 Laboratory-sized Q-2 circulation grinding system features flame-proof electricals and is sealed for grinding under inert gas. Metal free with ceramic-lined grinding chamber, mill features zirconium oxide sleeved agitator arms and Halar coated premix/holding tank. Dual dosing/additive tanks enable adjustments to premix-holding tank, and device utilizes 2.2 gal media volume with 5-20 gal recommended holding tank capacity.

Mate Precision Tooling
Anoka, MN 55303
Sep 19, 2006 Featuring multiple user-specified grinding programs, MPG Grinders allow for material removal in increments as small as .0002 in. to provide precise sharpening while avoiding overgrinding. One version allows manual adjustment of grinding wheel relative to top of tool component, while other version features laser sensor to automatically detect wheel position relative to tool. Both have fully enclosed work area and are equipped with CBN grinding wheel.

United Grinding Technologies, Inc.
Miamisburg, OH 45342
Sep 13, 2006 Helitronic Vision CNC tool grinder grinds carbide or HSS tools ranging from 1/8-12.6 in. dia. Machine features 2 rotary and 3 linear axes with direct drive linear motors that move up to 2,000 ipm, and dampening is provided by mineral casting for machine base and gantry. Tool Studio software offers ability to setup while machine grinds, and machine can be equipped with both automatic tool loader and wheel changer, enabling flexible multiple-shift operation with minimal manning.

United Grinding Technologies, Inc.
Miamisburg, OH 45342
Sep 12, 2006 Equipped with dynamic linear drives for linear and rotary axes, Prokos provides workpiece dimensions of 300 x 300 x 300 mm with XYZ-axis feed rates of 120,000, 10,000, and 50,000 mm/min, respectively. Speed stroke grinding keeps heat out of part, allowing grinding of titanium. Machine features 12,000 rpm variable speed motor and GE Fanuc 18i control with color flat screen, menu bars, softkeys, and Windows(TM) GUI. Optional tool-changing system combines grinding, milling, and drilling operations.

United Grinding Technologies, Inc.
Miamisburg, OH 45342
Sep 12, 2006 Offering automatic in-process regeneration (IPR) of grinding wheel, EWAG EWAMATIC line grinds and erodes round tools and inserts in PCD and carbide. Direct-drive C-axis workhead (PEK axis) lends to overall grinding precision and productivity. Using torque motor results in axis speeds to 1,000 rpm. While max wheel size is 11.8 in., max clamping power is 7,000 N. Automatic hydraulic compensation system ensures workpiece remains perfectly parallel.

Chevalier Machinery, Inc.
Santa Fe Springs, CA 90670
Sep 11, 2006 Combining linear motor drive and 3-axis closed-loop electronic control, Model FPG-608LM delivers reciprocating rate of 720 times/min at 5/8 in. stroke and 328 fpm table speed. Machine offers 6 x 8 in. work area, 0.0001 in. X and 0.000040 in. YZ axis repeatabilities, and 2,000-10,000 rpm spindle speed. Adjustable grinding head swivels with ±5° range to meet various applications. Control options include FANUC 18iM with FANUC linear motors or Smart control using Siemens linear motors.