Dremel
Racine, WI 53406
Oct 09, 2009 Used for carving, engraving, routing, grinding, sanding, cutting, cleaning, polishing, and more, corded Dremel® 4000 is compatible with all Dremel accessories/attachments and offers 5,000-35,000 rpm variable-speed range. Replaceable motor brushes extend motor life, fan motor helps keeps tool cool, and electronic feedback control ensures consistent power delivery. Also, 360° grip zone and additional pencil-grip nose cap promote comfort and stability during operation.

Sioux Tools, Inc.
Murphy, NC 28906
Oct 02, 2009 Featuring 4-position adjustable angle head with round motor barrel, SAG10 Series includes 6 models with 3 different speeds - 12,000, 15,000, and 18,000 rpm - and choice of ¼ in. or 6 mm heavy-duty, precision ground 200 series collet. Responsive teasing throttles promote smooth startups and control, while 5-vane motor, heavy-duty steel gear head, and gear packages lend to power, working speed, and durability. Also, 2.9 in. gear case permits access in tight spaces.

Dynabrade, Inc.
Clarence, NY 14031
Sep 23, 2009 Used for precision grinding, deburring, and blending on variety of materials, .4 hp Die Grinders are rated from 950-30,000 rpm and available with different size collets and collet inserts. Composite overmold housing reduces tool vibration and cold air transmission to operator, while muffler reduces sound levels in workplace. Geared and gearless air tools come with straight line, right-angle, or 7° offset handle designs. Front and rear exhaust models are also available.

Transor Filter U S A
Elk Grove Village, IL 60007
Aug 21, 2009 Replacing existing oil reservoir and pumps offered with grinder, Nano T Filtration System cleans oil to 1 micron, and, with integrated refrigerant system, controls oil temperature to ±0.2°C. Automatic backflushing procedure cleans filter elements and places debris in container for disposal or reclamation. Consisting of magnetic separator and mesh socks that remove large particles, MSK Combo pre-filter addresses applications involving magnetic materials or those with heavy stock removal.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Aug 12, 2009 Featuring cutting chambers optimized for handling bulky solids, TASKMASTER® TITAN (TM22000) has low headloss design and employs 2 counter-rotating shafts. One cutter stack intermeshes with second of greater diameter, promoting efficient feeding, reducing bulky solids, and helping flow pass through freely. Machine is also available as TITAN DUPLEX, featuring 2X cutting area, 10 hp motor, and cycloidal gear drive. PLC-driven S260 automatic reversing control system is also included.

Cooper Tools
Apex, NC 27502
Jun 25, 2009 Dotco die grinders 12LF Series and 10LF Series feature rugged aluminum body and dual-material composite body with cushioned areas, respectively. They are available with rated speeds of 12,000 or 20,000 rpm using either 9 or 11 cfm of air at 90 psi. Grinders feature design that does not require shim kit after disassembly, simplifying maintenance.

Modern Process Equipment, Inc.
Chicago, IL 60623
Mar 10, 2009 Urea Prill Gran-U-Lizer(TM) provides 90-95% yields for common urea or NPK prill grind sizes. Dust-tight system is infinitely adjustable and offers capacities from 2-20 Mtons/hr. Constructed of noncorrosive materials and high hardness rolls, it utilizes continuous roller-style method to maximize yield and minimize waste and energy usage. Grinder is suited for use in fertilizer process facilities.

Metabo Corp.
West Chester, PA 19380 4243
Feb 23, 2009 Model E9-125 Quick 5 in. angle grinder features vario constamatic (VC) electronic speed stabilization, which monitors motor current and adds voltage as load increases, optimizing running speed. Unit provides 950 W of power and 22 lb-in. torque, with power interruption protection. At 5.4 lb, it is protected from dust/debris and has side handle absorbing up to 60% of vibration. Soft start, optimized airflow, and heat dissipating housing are included along with various other safety features.

Metabo Corp.
West Chester, PA 19380 4243
Jan 28, 2009 Weighing 6.2 lb, 5 in. Stone Master WE14-125VS suits grinding, cutting, and finishing of granite, marble, or concrete countertops as well as grinding and finishing of specialty metals. Features include soft start, CoolFlow technology for unrestricted airflow, aluminum die-cast housing, and secure racket grip and dual grip zones for ergonomic handling. Motor offers 12.2 A and 1,400 W of power and variable speed range of 2,800-10,500 rpm.

Vollmer of America Corp.
Carnegie, PA 15205
Dec 23, 2008 Suited for manufacture of diamond tipped cutting tools, QWD 750H features 5 axis machining including rotating work head in E and A axes that enables precise, repeatable and continuous path profiling of complex tool shapes such as step and profile tools. It allows for cutting difficult axial and radial angles in single set-up. Unit can be equipped with magazines holding 4, 12, or 36 tools and multiple chucking systems, and can be fully automated to provide unattended operation.

Vollmer of America Corp.
Carnegie, PA 15205
Dec 23, 2008 Featuring 5-axis CNC loader, QWD 760H includes rotating work head in E and A axes that enables precise, repeatable, and continuous path profiling of complex tool shapes such as step and profile tools. ExProg Software allows for simulating parts machining for review prior to eroding first workpiece. With completely programmable generator, which can be set for 4 erosion stages for coarse roughing, roughing, finishing, and fine finishing, unit achieves surface finishes less than 0.2 microns Ra.

T.C. Service
Willoughby, OH 44094
Oct 14, 2008 Targeting stainless steel fabricators as well as those working with aluminum, 330 RAD series geared grinders feature small head, in both diameter and height, allowing use in tight, space restricted surface areas. Available with .4 or .7 hp motor, right angle grinders are suitable for precision surface condition and finishing. Various speeds are available to meet surface and abrasive requirements.

Metabo Corp.
West Chester, PA 19380 4243
Sep 17, 2008 Suited for finishing welded seams, rough grinding for weld preparation, and sanding/cutting applications, Model W8-125 is 5 in. angle grinder that features 8.0 A motor with 800 W of power, 19.5 lb-in. of torque, and no-load speed of 10,000 rpm. Secure racket grip and dual grip zones ensure ergonomic handling, while anti-vibration side handle absorbs up to 60% of vibration. Unit offers safety features including tool-less guard adjustment, spindle lock, and safety slip clutch.

Munson Machinery Co., Inc.
Utica, NY 13503
Aug 04, 2008 Employed for coarse grinding of materials into particles of uniform sizes ranging from granules down to 20-30 mesh, Model SCC-15 Screen Classifying Cutter has 15 in. throat width and can be fitted with 30 parallelograms with 60 cutter inserts. Bed screen perforations range from 1/32 to 1½ in. in dia and up to 3 in. square, according to material characteristics and desired particle size. Shaft rotates at 30-3,600 rpm producing up to 500 cu ft/hr of sized product, depending on application.

Buehler, Ltd.
Lake Bluff, IL 60044
Jul 11, 2008 Equipped with variable-speed heavy-duty motors, EcoMet® 250 Metallographic Grinder-Polisher can be used alone for manual grinding applications, or it can be combined with AutoMet® 250 Power Head for semi-automatic applications. Unit includes sealed membrane keypad controls, cast iron base construction, LED lighting, retractable water hose, quick release chuck, replaceable bowl liner, and 360º bowl rinse system. Finish is stain, chip, and corrosion resistant.

Modern Process Equipment, Inc.
Chicago, IL 60623
Jul 09, 2008 Model 88 WC Granola Gran-U-Lizer(TM) utilizes water-cooled rollers and proprietary tooth profile to cut and tear granola into variety of grind profiles. Capacity ranges from 1,000-4,000 lb/hr, depending on grind size setting. Larger and smaller versions are also available.

Metabo Corp.
West Chester, PA 19380 4243
Jul 08, 2008 Measuring 4½ in., Model W8-115 Quick Angle Grinder features cool flow technology with repositioned brushes for unrestricted airflow. It has 8.0 A motor with 800 W of power, 19.5 in./lb of torque, and no-load speed of 10,000 rpm. Weighing 6.2 lb, tool includes double lipped labyrinth sealed bearings, winding protection grid, epoxy coated windings, racket and dual grip zones for ergonomic handling, anti-vibration side handle, and Quick tool-less wheel change system.

Herbold Meckesheim USA
Smithfield, RI 02917
May 09, 2008 Suitable for dry or wet operation, horizontally fed SB Series granulate containers made of Polyethylene Terephthalate (PET) and other recyclable plastics. Horizontal feeding screws force materials from hopper to adjacent cutting chamber at steady, even pace instead of depending on materials to fall directly into blades, which reduces fines and dust. Granulators can also be used for secondary size reduction of pre-shredded plastics.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005-2550
Apr 08, 2008 Weighing 6.8 lb, 4½ in. V28(TM) Grinder (0725-20) handles wide range of applications including cutting bolt, pipe, angle iron, and grinding weld beam. With 3.0 Ah, 28 V lithium-ion battery, it delivers 8,000 rpm and incorporates overload protection and soft start features. Large spindle lock allows for quick wheel replacement and 5-position tool-free guard facilitates adjustment. Battery fuel gauge indicates remaining run time. V28 Grinder is also available in kit.

CS Unitec, Inc.
Norwalk, CT 06850
Mar 21, 2008 VARILEX WSF 1600 speed-controlled angle grinder features 12.27 A motor and infinite variable-speed control from 2,000-7,300 rpm. Designed for heavy industrial use, it weighs 5.2 lb and includes EASY-LOCK clamping nut and spindle lock button for changing discs and standard 5/8 in. 11 UNC spindle thread connection with balanced handle. Machine is available with safety guards from 4½-7 in. for use with various-size grinding discs of 4-7 in. dia.