Henkel
Rocky Hill, CT 06067
Jul 30, 2009 Formulated to generate minimal foam and be used continuously for years with minimal biological degradation, Multan® B 236(TM) and B 414(TM) are semi-synthetic, water-soluble solutions for machining and grinding ferrous and non-ferrous alloys. Multan B 236, suited for most water conditions and multi-metal applications, offers optimal performance on cast iron and steel. With additional properties, Multan® B 414 contains more oil and is formulated with additional extreme pressure additives.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 04, 2009 Suited for machining and grinding ferrous and non-ferrous alloys, semi-synthetic Multan® B 236(TM) and B 414(TM) can be used continuously for years with minimal biological degradation. Multan® B 236(TM) is intended for cast iron and steel, which require rapid cooling, corrosion protection, and moderate lubrication. Multan® B 414(TM) is similar but contains more oil and additional extreme pressure additives making it suited for aluminum, stainless steel, titanium, inconel, brass, or copper.

JTM Products, Inc.
Solon, OH 44139
Jan 15, 2009 Containing mineral oil and extreme pressure additives, semi-synthetic KoolRite(TM) 2365 coolant can be used with cast iron, all steels, and non-ferrous metals with exception of magnesium. It is especially suited for use on aluminum. In addition to controlling foam from high pressure chip removal systems, KoolRite 2365 will not stain non-ferrous metals and is formulated with JTM BioArmor(TM) Technology, making it resistant to bacterial and fungal growth, yielding long sump life.

Master Chemical Corporation
Perrysburg, OH 43552
Oct 16, 2008 Effective in range of operations from surface and centerless grinding to broaching, gear hobbing, surface, pocket, and thread milling, TRIM® E906 emulsion has balance of cooling and lubrication that extends tool life and surface finishes. Tight emulsion reduces carryoff and gets fluid to point of cut. E906 does not contain phenol, is removed with water, working solution, or TRIM® CLEAN aqueous cleaners, and can be recycled or disposed of with conventional techniques and equipment.

JTM Products, Inc.
Solon, OH 44139
Feb 01, 2008 Combining qualities of synthetics with those of soluble oils, KoolRite(TM) 2580 provides light oily residual film that lubricates and protects machine components. Non-foaming coolant helps prevent rust and will not split or separate. Formulated with Bio Armor(TM) technology, product is resistant to bacterial and fungal growth. It is suited for machining high-temperature and high nickel alloys, stainless steel, titanium, aluminum, and exotic metals.

Master Chemical Corporation
Perrysburg, OH 43552
Dec 07, 2007 Meeting stringent nuclear and aerospace chemical content and machining requirements, TRIM® C350 is suited for machining and grinding of aircraft air frame and power plant parts/components. Using synthetic ester technology, synthetic coolant does not use conventional sulfur or chlorine based EP additives. Product's pH neutral and less than 100 ppm total chloride working solutions provide corrosion and stain resistance even on most sensitive alloys.

ITW Rocol North America
Glenview, IL 60025
Oct 31, 2007 Natural-/vegetable-based metalworking oil, Accu-Lube FG-2000, is suited for use in food and medical applications requiring machining, drilling, and tapping. It provides lubricity to cutting edge of any tool for sawing of solids up to 6 in. dia as well as tubing of any size. Consumed in cutting process, non-toxic and biodegradable product eliminates need for clean up, disposal, and flood coolant. It is safe for use on all metals and certified by NSF as safe for incidental food contact.

Exxon Mobil Corp.
Irving, TX 75039 2298
Nov 16, 2006 Offered in 3 different viscosity grades, Mobilmet® 760 Fluids are suitable lubricants for cutting stainless steel, titanium, nickel alloys, and tool steel. Anti-wear properties help minimize unscheduled maintenance and extend component service life. Compatible with Mobil hydraulic, spindle, and slideway oils, heavy-duty fluids withstand rigors of difficult applications, such as broaching, gear manufacturing, and tapping.

Blaser Swisslube Inc.
Goshen, NY 10924
Aug 14, 2006 Offered in 2 versions, Grindex water miscible synthetic grinding fluids are suited for steel and iron. Mineral oil-free products provide optimal rinsing and settling behavior required in grinding operations. While Grindex 10 is considered common version, Grindex 10CO is highly inhibited for carbide grinding to prevent cobalt leaching. Both offer corrosion protection and are engineered to ensure good washing action and foam protection.

Blaser Swisslube Inc.
Goshen, NY 10924
Jun 23, 2006 Facilitating part machining with minimized waste, Blasocut® BC37MG solves issues of instability, separations, and short fluid life normally associated with machining magnesium. Mineral oil-based, chlorine-free liquid tool is also suited for other ferrous and non-ferrous materials such as brass and/or bronze, as it will not form insoluble lead soaps.

Tap Magic, A Div. Of The Steco Corporation
Little Rock, AR 72202
Mar 30, 2005 Usable as stand-alone or booster fluid, Tap Magic Xtra-Foamy is suited for use on all metals up to 45 Rockwell hardness. Foamy consistency provides visibility so that users can gauge application rate and fluid presence. Offered in 17 oz aerosol can, product contains EP-X3 proprietary additive and eliminates metal hardening during cutting operation. Single application stays with tool and workpiece for cuts of long duration.

Blaser Swisslube Inc.
Goshen, NY 10924
Mar 17, 2005 Mineral oil-free Synergy 15â„¢ cutting fluid is suitable for machining and grinding hard metals and copper alloys when oil free coolant is required. It can be used with hard or soft water, provides foam control, and achieves long term sump life without use of bactericides.

Castrol Industrial North America Inc.
Downers Grove, IL 60515
Dec 19, 2003 Castrol Syntilo® 2109 oil-absorbing synthetic fluid absorbs 1–2% tramp oil to enhance corrosion protection and improve machining lubrication. When contaminated with tramp oils, low-foaming product resists microbial attack and remains clean-running.

ITW Fluid Products Group
Glenview, IL 60025
May 23, 2003 Biostable chlorinated semi-synthetic cutting fluid, Rustlick® Ultracut 375R, offers lubricity and rust protection for ferrous and non-ferrous metals. Translucent emulsion has chlorinated and non-chlorinated EP additives. Fluid is used for machining and grinding operations in machine shops and is available in 5 or 55 gal containers.

Castrol Industrial North America Inc.
Downers Grove, IL 60515
Dec 06, 2002 Synthetic emulsion, Syntilo® XG 100 is formulated for grinding ferrous metals as well as nickel and titanium alloys. Extremely bioresistant, Syntilo XG 100 decreases problems associated with dirty, rancid soluble oils by resisting micobial attack in high contamination situations. It has low propensity to foam when applied through high-pressure nozzles, and remains clean running in hard water conditions.

Castrol Industrial North America Inc.
Downers Grove, IL 60515
Sep 16, 2002 Alusol® A semi-synthetic metalworking fluid is formulated for machining and grinding aerospace aluminum and aerospace alloys in either large central systems or single sump applications. It is chlorine-free, yet overcomes tool wear, poor surface finish and staining. Alusol A is extremely bioresistant, and provides wetting properties for penetration at point of cut with minimal fluid drag-out. It exhibits foam control and only has mild odor.

Tap Magic, A Div. Of The Steco Corporation
Little Rock, AR 72202
Sep 11, 2002 Tap Magic Xtra-Thick heavy-duty cutting fluid is suited for machining work on inconel, titanium, and stainless steel. Fluid eliminates work hardening and ensures single application stays with tool and work piece for cuts of long duration. Clinging action is suited for reaming, lathe, and mill work. Xtra-Thick contains EP-X3 and is offered in sizes from 16 oz to 55 gallons.

CRC Industries, Inc.
Warminster, PA 18974
Jul 30, 2002 Honey-like TrueTapâ„¢ HD, for severe applications, clings to cutting tools. TrueTapâ„¢ Foamy aerosol foams on contact with cutting tool, penetrating deep into cut. TrueTapâ„¢ LV, for re-circulating coolant pumps, floats on surface for skimming. Biodegradable TrueTapâ„¢ NTL is non-irritating to eyes, skin, and respiratory tract. Water-soluble TrueTapâ„¢ Aqua replaces solvent or oil-based fluids. True Tapâ„¢ AL suits aluminum and its alloys. True Tapâ„¢ EP is for extreme-duty applications. TrueTapâ„¢ Wax Stick removes heat and lubricates.

ITW Fluid Products Group
Glenview, IL 60025
Mar 05, 2002 Rustlick® Ultracut 370R can be used for both machining and grinding. Heavy-duty coolant is formulated for wide range of ferrous and non-ferrous metals. It provides long sump life due to biostability and rust protection. Coolant is available in 5 and 55 gal containers.