Disk Grinders

Machinery & Machining Tools

Vertical Grinders handle heavy material removal.

April 11, 2014

Compatible with industry standard abrasives, Vertical Grinders are engineered for heavy metal fabrication processes in multiple industries including shipbuilding, rail and foundry, and infrastructure applications. Units feature reversible handle and one-piece, all metal housing for harsh environments. Available in 3 hp and 4 hp versions with industrial governor, grinders offer variety of guard options, including 6 in. Type 6 and Type 11, 7 in. Type 27, and 9 in. Type 27.  Read More

Machinery & Machining Tools, Portable Tools

Vertical Sanders and Grinders serve heavy-duty applications.

January 17, 2013

Available in 2 and 3 hp versions, 7 in. Diameter Vertical Depressed Center Wheel Grinders (6,000, 7,200, or 8,500 rpm) and 6 in. Diameter Vertical Cup Wheel Grinder (6,000 rpm) are suited for heavy deburring as well as fast weld and stock removal. Also available in 2 and 3 hp variants, 7 in. Diameter Vertical Disc Sanders run at 6,000, 7,200, or 8,500 rpm and are suited for grinding sheet metal and sanding metal parts, as well as removing mill finish, paint, and rust. Read More

Machinery & Machining Tools

Double-Disc Grinders offer minimized dressing cycle times.

November 19, 2010

Double-disc grinding machine tools DDG450 and DDG600 are available with in-situ measurement system for in-process positioning of grinding wheel surface. System measures wheel surface during grinding process itself, even for workpieces down to 2.0 mm thick, and automatically corrects for any wheel wear. Non-contact scanning of grinding wheel surface at peripheral speeds of 30 m/sec is accurate to 5 µm and not influenced by challenges to grinding environment. Read More

Machinery & Machining Tools, Materials & Material Processing, Green & Clean

C & B Machinery Wins Grinding Machine Order to Produce Connecting Rods for the Chevy Volt

October 8, 2010

Livonia, MI - C & B Machinery has been awarded an order by GM for two special double disc grinding systems to finish grind both coplanar and non-coplanar connecting rods for the auxiliary 1.4L engine in the electrically powered Chevy Volt.<4444>Double disc grinders grind both sides of flat parts at the same time using opposing wheels. The C & B Double Disc Grinder is equipped with horizontal... Read More

Machinery & Machining Tools, Portable Tools

Angle Grinder features quick tool-less wheel change system.

May 27, 2009

Weighing 6 lb and measuring only 13 in., WB 11-125 features disk brake that stops tool in less than 3 sec when used with grinding discs, and in less than 1.5 sec with thin cutting discs. Unit is constructed of low-profile aluminum die-cast gear housing and features 9.6 A motor with 1,100 W of power, 26.9 in-lb. of torque, and no-load speed of 10,000 rpm. Safety features include tool-less guard adjustment, spindle lock, S-Automatic safety slip clutch, and anti-vibration side handle. Read More

Machinery & Machining Tools, Portable Tools

Angle Grinder features quick change wheel system.

April 22, 2009

Weighing just 6 lb, 6 in. W11-150 Quick compact class angle grinder suits cutting and grinding applications in metalworking and mechanical maintenance industries. Features included are 9.6 A motor, 1,100 W of power, 29.2 in.-lb of torque, and no-load speed of 9,000 rpm. Unit also comes with encapsulated on/off switch, carbon brush holders, double-lipped labyrinth sealed bearings, and dust-deflecting winding protection grid. Read More

Machinery & Machining Tools, Materials & Material Processing

Double Disc Grinder uses rotary plunge grinding process.

September 11, 2006

Available with choice of Siemens or Fanuc CNC control, Landis Giustina R220 utilizes grinding process that promotes optimal parallelism, flatness, size control, and squareness. It processes parts from 18-40 mm wide and enables part-to-part changeovers in as little as 3 sec. Machine also accommodates wheel changes in 30 min or less. Within its compact footprint, grinder features cast iron bed; servo-controlled, precision ball screw feed system; and rotary feed carrier. Read More

Machinery & Machining Tools, Materials & Material Processing, Non-Industrial Products

Disc-Style Coffee Grinders provide grind uniformity

April 20, 2005

Utilizing Platinum Series Burrs(TM), Series GPX Grinders produce batch sizes as small as 1 lb, and are designed to grind 350-600 lb/hour. Dial allows selection of any desired coffee grind, with end result being ability to achieve full range of grinds for variety of coffee production applications. Read More

Machinery & Machining Tools, Portable Tools

Angle Grinders feature spanner wrench on handle.

April 26, 2004

Series 7430K and 7416K 4½ in. angle grinders have spanner wrench on handle that facilitates changing pad, blade, disc, or other accessory during use. Operating at 10,000 rpm and incorporating 3-position auxiliary handle and case, 7430K provides 8 A power with paddle switch and 7416K provides 6 A power with slide switch. They suit sharpening, cutting, sanding, stripping, and grinding applications in construction, masonry, and automotive sectors. Read More

Machinery & Machining Tools

Resin Fiber Discs perform aluminum grinding operations.

March 12, 2003

Resin Fiber Discs resist loading and ensure constant grain contact with work surface. Discs are used for weld blending, grinding, deburring, and finishing on aluminum surfaces. They are offered in Twist-lock and Posi-grip styles for air tools and with 7/8 in. arbor hole for electric tools. Discs do not require grease sticks. Read More

Machinery & Machining Tools

Rotating Fixture improves quality of disc grinding.

February 26, 2003

Power-Rotating Fixture allows simultaneous grinding of both sides of parts. It is used with company's vertical double-disc grinders to produce lap-type tolerances in grinding parts with flat and parallel surfaces. Part rotation is fully programmable using servo-controlled fixture, so amount of rotation can be varied during grind. Because it is independent of carrier drive system, fixture can be installed and removed with little downtime for changeover. Read More

Machinery & Machining Tools

Wheel Grinder has ergonomic design.

November 13, 2002

Depressed Center Wheel Grinder, with 1 hp air motor, has one-piece governor design for maintaining rpm under load. The 4 1/2 in. diameter, 12,000 rpm tool is suitable for fast stock removal, metal clean up prior to welding, and removal of weld beads. Grinder features safety-lock throttle to prevent accidental start-up, along with Grip-traction side-handle to increase safety and reduce hand fatigue. Rear exhaust inline muffler assembly reduces sound levels to 78 dB. Read More

  • 1