Wheelabrator Group
Burlington, ON L7L5V5  Canada
Jul 02, 2009 Available with unit bearing for belt-driven applications, EZEFIT® wheel contains all features and benefits of direct-drive wheel. It eliminates need for mounting base plate, reduces vibration and wheel assembly time, and offers fail-safe wheel component alignment. Mounting hardware allows for upgrades on most wheel blast machines - Wheelabrator® and non-Wheelabrator - that include Tumble Blast, Spinner Hanger, Monorail, Table, and Railcar Shot Blast systems.

Cooper Tools
Apex, NC 27502
Jun 25, 2009 Dotco die grinders 12LF Series and 10LF Series feature rugged aluminum body and dual-material composite body with cushioned areas, respectively. They are available with rated speeds of 12,000 or 20,000 rpm using either 9 or 11 cfm of air at 90 psi. Grinders feature design that does not require shim kit after disassembly, simplifying maintenance.

Rex-Cut Products, Inc.
Fall River, MA 02720
Jun 22, 2009 Available in 4½, 5, and 7 in. dia x 7/8 sizes, Rex-Cut® SIGMA ceramic flap discs feature ceramic abrasive grains bonded to treated material that is layered and stacked to provide aggressive and controlled stock removal with minimal pressure. Offered in 36 and 60 grit versions, with or without hubs, units are suited for use on stainless steel, mild steel, and exotic metals. These are also available with 5/8-11 adapters.

Pangborn
Hagerstown, MD 21741
Jun 22, 2009 Used for surface preparation, Genesis blast wheel incorporates features designed to reduce maintenance time and improve efficiency. Front-of-housing access to runnerheads enables full assembly in less than 1 hr, and dual-tapered vanes eliminate shot locking. Along with replaceable housing liners and cast linings made with P-41 metallurgy, wheel includes safety features such as lid with pin-locked safety hinges, integral U-shaped feed spout safety lock, and rapid release vanes.

Metabo Corp.
West Chester, PA 19380 4243
Jun 19, 2009 With functionality matched to specific applications, Choice Cuts series is comprised of 4 cutting wheels with selection of abrasive grains and engineered resin bond formulas. Original Slicers are 0.040 in. thick aluminum oxide wheels, and 1/16 in. LongLife Original Slicer versions are also available. Other products include 0.045 in. thick Slicer-Plus and 0.045 in. Super-Slicer. All wheels are available in 4.5 x 7/8 in. and 6 x 7/8 in. dia.

Jones & Shipman Precision Limited
Farmington, CT 06032
Jun 08, 2009 Holroyd Gear and Thread Grinder, model GTG2, offers precision grinding of helical/spur gears in diameters up to 350 mm. System enables users to grind small batches of gears to DIN and AGMA quality standards. On-board intelligence includes 3D scanning as well as stress prediction software which allows machine to optimize gear design. Machine can also produce master gears, precision prototyping, and timing gears for use in aerospace applications.

Metabo Corp.
West Chester, PA 19380 4243
May 27, 2009 Weighing 6 lb and measuring only 13 in., WB 11-125 features disk brake that stops tool in less than 3 sec when used with grinding discs, and in less than 1.5 sec with thin cutting discs. Unit is constructed of low-profile aluminum die-cast gear housing and features 9.6 A motor with 1,100 W of power, 26.9 in-lb. of torque, and no-load speed of 10,000 rpm. Safety features include tool-less guard adjustment, spindle lock, S-Automatic safety slip clutch, and anti-vibration side handle.

Pangborn
Hagerstown, MD 21741
May 11, 2009 Genesis series includes high-speed, 14-18 in. dia wheels with single- or double-sided runnerheads as well as low-speed, 19.5-26.5 in. dia wheels. Latter exhibits reduced abrasives consumption, better cleaning, and lower horsepower requirements. Features such as front-of-housing access to runnerheads enable full assembly in less than 1 hr, setting pattern length is one-step job, and dual-tapered vanes eliminate shot locking. Multiple safety features are also included.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 04, 2009 Suited for machining and grinding ferrous and non-ferrous alloys, semi-synthetic Multan® B 236(TM) and B 414(TM) can be used continuously for years with minimal biological degradation. Multan® B 236(TM) is intended for cast iron and steel, which require rapid cooling, corrosion protection, and moderate lubrication. Multan® B 414(TM) is similar but contains more oil and additional extreme pressure additives making it suited for aluminum, stainless steel, titanium, inconel, brass, or copper.

Weiler Corporation
Cresco, PA 18326 0149
May 01, 2009 Working with steel, iron, and other ferrous metals, Vortec Pro(TM) wheels are reinforced with fiberglass webbing for stability and resin-bond-formulated for aggressive stock removal and accelerated cutting. Type 27 grinding and cutting products, offered in 4-7 in. dia, have aluminum oxide grain and are designed for use on right-angle grinders. Available from 2-7 in. dia, Type 1 cutting wheels have same grain, incorporate metal ring around hub, and may be used on wider range of grinders.

CS Unitec, Inc.
Norwalk, CT 06850
Apr 29, 2009 PLANTEX® COOL TOP® flap discs feature zirconium abrasive fabric, with top-size coating that optimizes grinding performance, and backing plate made of natural hemp with polypropylene binder. Discs automatically reduce in size during grinding, allowing full use of abrasive fabric. Suited for speeds of 5,000-8,000 rpm and able to run at maximum of 13,300 rpm, they are available in diameters of 4, 4½, 5, and 7 in. and in grits of 40 and 60.

Metabo Corp.
West Chester, PA 19380 4243
Apr 22, 2009 Weighing just 6 lb, 6 in. W11-150 Quick compact class angle grinder suits cutting and grinding applications in metalworking and mechanical maintenance industries. Features included are 9.6 A motor, 1,100 W of power, 29.2 in.-lb of torque, and no-load speed of 9,000 rpm. Unit also comes with encapsulated on/off switch, carbon brush holders, double-lipped labyrinth sealed bearings, and dust-deflecting winding protection grid.

Baldor Electric Company
Fort Smith, AR 72901
Mar 17, 2009 Providing over 5,000 fpm of belt speed, Belt Sander/Grinder 602E-MT has front contact wheel that can be used to grind, sand, shape, and polish flat and curved surfaces with smooth, fast cutting and less heat. Unit's 2 x 36 in. belt can be swiveled vertically or into any other position, while it's miter table tilts from 5-50° downward. Unit is supplied with 100 grit sand belt, 6 in. 0.014 ga wire wheel, and OSHA compliant guarding.

Modern Process Equipment, Inc.
Chicago, IL 60623
Mar 10, 2009 Urea Prill Gran-U-Lizer(TM) provides 90-95% yields for common urea or NPK prill grind sizes. Dust-tight system is infinitely adjustable and offers capacities from 2-20 Mtons/hr. Constructed of noncorrosive materials and high hardness rolls, it utilizes continuous roller-style method to maximize yield and minimize waste and energy usage. Grinder is suited for use in fertilizer process facilities.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005-2550
Mar 10, 2009 Built with 4-pole motor, 4½ in. M18 Model 2680-22 operates at speeds up to 9,000 rpm and includes L-shape intake vents to keep harmful debris from entering tool and damaging critical components. Grinder also features 3-position handle, tool-free adjustable guard, and Overload Protection to prevent damage in abusive situations. Milwaukee® 18V XC High Capacity LITHIUM-ION technology features DPM(TM) - Digital Power Management to provide maximum tool life and run-time.

Metabo Corp.
West Chester, PA 19380 4243
Feb 23, 2009 Model E9-125 Quick 5 in. angle grinder features vario constamatic (VC) electronic speed stabilization, which monitors motor current and adds voltage as load increases, optimizing running speed. Unit provides 950 W of power and 22 lb-in. torque, with power interruption protection. At 5.4 lb, it is protected from dust/debris and has side handle absorbing up to 60% of vibration. Soft start, optimized airflow, and heat dissipating housing are included along with various other safety features.

CGW, Camel Grinding Wheels, USA
Niles, IL 60714
Feb 16, 2009 Z-THRU(TM) flap discs feature laser cut flaps, precisely layered to create transparent grinding zone that let users view work piece while grinding. Made from zirconia alumina grain, high-grade cooling agent, and heat-treated poly/cotton backing material, discs may be used for blending, finishing, and rust removal and can be used on carbon and stainless steels. They come in 4½ and 5 in. dia, with 40-, 60-, and 80-grit sizes and 7/8 in. or 5/8-11 arbor holes.

Metabo Corp.
West Chester, PA 19380 4243
Jan 28, 2009 Weighing 6.2 lb, 5 in. Stone Master WE14-125VS suits grinding, cutting, and finishing of granite, marble, or concrete countertops as well as grinding and finishing of specialty metals. Features include soft start, CoolFlow technology for unrestricted airflow, aluminum die-cast housing, and secure racket grip and dual grip zones for ergonomic handling. Motor offers 12.2 A and 1,400 W of power and variable speed range of 2,800-10,500 rpm.

Rex-Cut Products, Inc.
Fall River, MA 02720
Jan 26, 2009 Megabrite(TM) Non-Woven Abrasives include unitized Type 1, convolute, and Type 27 wheels, mounted points and their finishing flap discs. They are manufactured by compressing non-woven synthetic fiber material with resin and abrasive grains. Open structured products are offered in soft to hard densities (2-9) and coarse to very fine grit. Flap discs blend and finish weld in one operation, and mounted points come in variety of A, B, and W industry standard shapes and sizes.

Metabo Corp.
West Chester, PA 19380 4243
Jan 26, 2009 Weighing just 6.3 lb, WE14-150 Quick 6 in. suits heavy duty cutting and grinding applications in metal working and mechanical maintenance industries. It offers 1,400 W of power, 31 in.-lb of torque and no-load speed of 9,000 rpm. It comes with wheel guard, inner flange, and flange kit for mounting both type 1 and type 27 wheels. Other features included are encapsulated on/off switch, double-lipped labyrinth sealed bearings, and dust-deflecting winding protection grid.