Drills and Cutters provide portable presses and accurate holes.

Durabore(R) Drillmate(R) converts hand held air drills, corded electric, and battery operated hand drills into portable drill presses. Hole diameters up to 1 1/16 in. are produced with 1/2 in. hand drills when using DuraBore(R) center free mini cutters. Vacforce(R) converts hand held air drills into 8 lb portable drill presses. Hole diameters to 1 1/16 in. through 5/8 in. material thickness are...

Read More »
Abrasive Saw cuts 5 in. solids and 8 in. shapes.

Abrasive Saw cuts 5 in. solids and 8 in. shapes.

Model K30PH 30 in. saw features air over oil power downfeed, 1 3/4 in. arbor with sealed ball bearings, 1,800 rpm spindle speed, and 25 hp motor with magnetic starter. It also includes cog belt drive, cam vise, heavy safety guard, and down stop. Stock conveyor is optional.

Read More »
Semi-Automatic Saw performs wet abrasive cutting.

Semi-Automatic Saw performs wet abrasive cutting.

Model K20E totally enclosed saw features 15 hp SD motor with magnetic starter, 1950 rpm 1 in. spindle arbor, and coolant pump system with dual coolant hoses. Operation includes manual feed with air over oil precise downfeed, and automatic saw head return at end of cut. Adjustable down stop limits depth of cut. Unit includes V-belt drive, sealed ball bearings, air chain vise, and front and side...

Read More »
Air Plasma Cutting System produces 1 in. genuine cut.

Air Plasma Cutting System produces 1 in. genuine cut.

CutMaster 100 features PCH-102 SureLok(TM) torch with MaximumLife(TM) electrode. IGBT variable power supply delivers up to 80 amps of cutting current. Unit produces 1 in. cut, with no rework or grinding required, at 10 in. per minute on mild steel. Maximum cut rating is 1 1/4 in. and severance cut rating is 1 1/2 in. Extended tip and shield cup allow beveling at angles up to 45 deg. System has...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Laser Systems cut accurately.

Laser Systems cut accurately.

Z-1 and Z-2 Laser Cutting Systems combine rigidity and accuracy of VMC with Coherent Diamond-Series CO2 pulsed lasers. Z-1 has 100 W laser and 16 x 12 x 10 in. (XYZ) travel, making it suitable for etching, engraving and cutting small metallic and non-metallic parts. Z-2 has 500 W laser and travels of 40 x 20 x 25 in. Both are available with 4th and 5th axis, providing ability to tackle...

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Cutting Machine handles stranded cables up to 3/0 AWG.

Cutting Machine handles stranded cables up to 3/0 AWG.

PowerCut 3500 automatically cuts large round cables up to 1.0 in. dia and flat ribbon cables up to 3.9 in. wide. It features electronic control and variety of interfaces for accessories. Feed belts are driven by servo-motor that transports material in length increments of 0.004 in. while providing extra feeding power needed for heavier cables. Pneumatic cutting machine can be used alone or fully...

Read More »
Tool Kit suits electrical and electronics applications.

Tool Kit suits electrical and electronics applications.

TK2100 field service kit is designed for electrical and electronics installation and repairs. It includes Model 410T Micro-Shear(R) Flush Cutter; FSS-6 stainless-steel scissors for cutting PVC jacketing, cables, pins and dowels; and 450 Tweezer Nose(TM) pliers for forming connectors, tightening pins, and holding wire. Items are packed into tri-fold nylon fabric pouch with individual pockets.

Read More »
Round Insert Cutter offers productivity ratio of 10:1.

Round Insert Cutter offers productivity ratio of 10:1.

CoroMill(R) 300 round insert cutter is suitable for machining of materials from soft aluminum to hardened steel. Designed for multi-axis milling, CoroMill 300 is available in long shank versions for machining deep closed pockets and narrow cavities with shallow radial and axial cuts. Available diameters range from 0.375 to 0.750 in. Precision ground inserts are available in carbide grades GC1025,...

Read More »
Plasma Cutter works in demanding environments.

Plasma Cutter works in demanding environments.

Portable CutMaster(TM) 75 air plasma cutting system, designed for field use, withstands handling, metal dust, and demanding conditions. It has IP-23C protection certification for operator safety and moisture resistance. Unit makes genuine cut of 7/8 in., maximum cut of 1 in., and severance cut of 1-1/4 in.

Read More »

All Topics