Burnishing Tools

Machinery & Machining Tools

New Compact Burnishing Tools are Ideal for Swiss-Type Machines

June 27, 2016

Dayton, OH - Swiss ID Burnishing Tools by Elliott Tool Technologies are ideal for accurate sizing, low micro-finishing, and surface hardening of ID holes down to 4 mm.  With the tool body completely inside the tool block, the new 5918 series features an adjustment knob which protrudes from the rear of the tool shank, thus allowing the burnishing tool size to be adjusted for diameter without... Read More

Machinery & Machining Tools

Burnishing Tools enhance fatigue-prone component manufacturing.

April 19, 2016

Self-contained hydraulic tools of 11073 Series are designed to manufacture fatigue-prone components in oilfield and heavy transportation industries using CNC lathe. With proper use, these tools enhance fatigue life of highly stressed, high-cycle components without slowing down process. Primary styles include Straight, Right Hand 45°, and Left Hand 45°, where each presents roll at different angle relative to shank. Tool angle can be further rotated (via lathe turret) to meet specific profile requirement. Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Non-Industrial Products, Portable Tools, Green & Clean

Floor Pad Scrubs, Buffs, Strips, and Polishes Floors while it Creates Jobs

March 4, 2016

Impact Earth™ Floor Pads from Impact Products include top quality stripping, scrubbing, spray buffing, polishing, and burnishing pads in a variety of dimensions. And these floor pads are also part of the USDA Bio-Preferred program, making them the greenest and most sustainable in the industry. Made from renewable, plant-based materials, Impact Earth pads are part of the “bio economy”... Read More

Machinery & Machining Tools

Skiving and Burnishing Machine creates hydraulic cylinders.

February 18, 2014

With feed rates up to 100 ipm, SBN300/1-600 Skiving and Roller Burnishing Machine can achieve hydraulic tube ID’s ranging from 1.37–16 in. and lengths up to 40 ft. using plain carbon steel, ST-52, ST-55, or aluminum for tube construction. Bore tolerances of IT7-IT8 and surface finish as fine as 4–6 Ra µin. are possible. Dual-pressure hydraulic clamping settings are programmable for self-centering vices that hold component in place during manufacturing, ensuring uninterrupted smooth finish. Read More

Machinery & Machining Tools, Services

Tornado® P Series Glazers(TM) Electric Burnishers

February 14, 2014

The P Series Glazers from Tornado are designed for operator comfort and unsurpassed burnishing performance. These machines are expertly balanced for ideal pad-to-floor pressure at sustained RPMs. This means greater efficiency, speed, and overall cost savings. With a patented design, the P Series Glazers have precision-balanced weight distribution, helping to eliminate the need for a... Read More

Machinery & Machining Tools

Micro Burnishing Tools come in internal and external styles.

August 5, 2013

Featuring rear adjustment mechanism which allows effective length of tool to be kept compact, Micro Roller Burnishing Tools are suitable for use where limited space is available on multi-spindle automatic and screw type machines. Internal through style tools are available in sizes from 0.187–0.501 in. diameter, and bottoming style for diameters larger than 0.246 in., while external tools come in sizes from 0.054–0.254 in. diameter in bottoming style. Read More

Machinery & Machining Tools, Green & Clean

It's a New Day with Tornado's Battery-Powered Glazer 17

July 16, 2012

The days of tangling with a power cord while working with corded electric high-speed burnishers are over. Introducing the Tornado Glazer 17-inch battery burnisher. <4444>This super-quiet, truly unique high-speed burnisher operates on environmentally friendly, maintenance-free gel batteries and delivers up to two hours of run time on a full charge. <4444>There will be no more stopping and... Read More

Laboratory and Research Supplies & Equipment, Machinery & Machining Tools, Services

Deburr Small Flat Parts Using the Power of Centrifugal Finishing

March 19, 2012

Our technology is ideal for finishing, deburring and burnishing of small flat metal parts that have a tendency to stick together. It is also suitable for thin delicate parts. This process offers 100% batch security as there is no mixing of parts. Centrifugal Finishing can be used for the manufacture of coin blanks for the Mint Industry. Email spaleck@vibra.com or call Doug Bradshaw 905... Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Portable Tools

Clarke to Showcase New Products at ISSA/INTERCLEAN® North America Trade Show

October 19, 2011

Plymouth, MN-Clarke, a brand of Nilfisk-Advance, Inc., announces it will be attending the 2011 ISSA/INTERCLEAN® North America trade show October 18-21, 2011 in Las Vegas, NV. Clarke will be introducing and demonstrating the company's new innovative products, including autoscrubbers, polishers and burnishers and carpet extractors. Clarke will be featuring its new products at booth... Read More

Machinery & Machining Tools, Portable Tools

Portable Electric Burnisher polishes stainless steel.

February 4, 2011

Accommodating abrasive wheels from 4-4.5 in. in diameter and 5/8-4 in. wide, Model SE12-115 is suited for grinding, polishing, sanding, and removing scratches and rust. Unit is equipped with 10 A motor providing 1,200 W of power, 98 lb-in. torque, and no-load speed of 900-2,800 rpm. In addition to Vario Tacho Constamatic electronic speed stabilization, tool incorporates dust-deflection winding protection grid, overload protection, auto-stop carbon brushes, and spiral bevel gears. Read More

Machinery & Machining Tools

Thread Rolling for the Oil and Gas Industry

September 20, 2010

In support of our unwavering commitment to be the supplier of choice CJWinter offers a comprehensive line of thread roll products for the Oil & Gas Industry that conform to the API Specification. If you manufacture Sucker Rods, Pony Rods, Sinker Bars or Couplings, in either AISI Grade or API Grade Alloy's, CJWinter is the Best Choice for your thread rolling needs. Sizes available in 5/8", 3/4",... Read More

Machinery & Machining Tools

High-Speed Floor Burnisher is powered by propane engine.

July 7, 2010

Along with 21 in. pad to accommodate smaller spaces, 21 in. Answer Floor Burnisher has completely modular design, full cast aluminum body with centered deck, and adjustable wheels for fine tuning pad pressure. Kawasaki 603cc engine, rated to 3,600 rpm, drives pad at speeds to 2,000 rpm while emitting no more than 80 dB during operation. Floor buffer machine is suited for use in areas such as schools, convenience stores, small grocery stores, and other smaller facilities. Read More

Machinery & Machining Tools

Electric Burnisher delivers 2,000 rpm of polishing power.

October 29, 2009

Designed for burnishing all types of hard-surface floors, 20 in. Millennium electric burnisher has rotational-molded one-piece housing to absorb vibrations. It has precision-balanced weight distribution, which eliminates need for compensation center or front-mount caster, improving operation and ease of use. Read More

Machinery & Machining Tools

Sugino's Diamond Tip Burnishing Tools Create Micro Finish Surfaces

September 21, 2009

Sugino Corp, (Itasca, IL) introduces their Cat's Eye Diamond Tip Burnishing Tool Line and Single Roller Superoll SR Type burnishing tool. The Cat's Eye is designed for long-life and wear when working materials raging from 45 Rockwell C Hardness up to 60 Rockwell C. The Cat's Eye can be used to create micro finishes on ID, OD, End Surfaces, Tapered Surfaces, R surfaces and Spherical surfaces on... Read More

Machinery & Machining Tools

Fresh Air Never Smelled So Good

April 15, 2009

Burnishing floors can be a dusty job. The machine is actually grinding the top layer of finish off the floor, removing heel marks and contaminants as it cleans but creating dust at the same time.<4444>Now the Tornado Industries® 2500B Clean-Air Glazer(TM) burnisher leaves floors shiny and clean without releasing dust and impurities into the air.<4444>The 2500B has a clean-air filtering system... Read More

Cleaning Products & Equipment, Machinery & Machining Tools

Hybrid Scrubber facilitates floor maintenance.

November 26, 2008

Combining floor scrubber, burnisher, and vacuum recovery unit, EcoScrub-n-Buff is suited for tile, VCT, polished or unpolished concrete, marble, and terrazzo floors. System features zero turning radius, 27 in. burnishing pad, and squeegee that extracts dirt and solution, leaving floor dry. Powered by EPA and CARB approved propane engine, machine eliminates electric cords and battery disposal issues. Emissions monitor automatically shuts machine down if engine is not running at optimum. Read More

Machinery & Machining Tools

Burnisher maintains shine on multiple surfaces.

November 5, 2008

Powered by clean-burning propane and Kawasaki 585 cc engine, cordless EnviroPro® WA27 can shine polished concrete, terrazzo, marble, VCT, and other tile floors by adjusting head weight. Floor temperature may also be increased as needed for modern concrete densifier and guard products. During operation, built-in active vacuum filter system captures airborne dust particulates and filters them to 1 micron. Dust skirt assembly, featuring spring action, ensures constant contact with floor. Read More

Machinery & Machining Tools, Mining, Oil Drilling & Refining, Portable Tools

Special Twin Coin Punch Tool Achieves Chamfer Diameter and Location Specs, Greatly Reduces Costs

July 24, 2008

Special tool based on Cogsdill recessing head design used a coining arbor to punch the hole and chamfer in the bottom of the reservoir in their master cylinders. The tool fed into the bore and then was offset, which caused the punch to make contact with the surface. They could only manufacture one punched hole at a time. The method by which the tool was offset caused deflection problems,... Read More

Cleaning Products & Equipment, Machinery & Machining Tools

Floor Burnisher comes with air filtering system.

March 28, 2008

With ability to protect indoor air quality, 2500 B Series of Clean-Air Glazers deliver 2,500 rpm with adjustable pad pressure. Suited for high-speed burnishing, units have sloped housing to improve operator view, safety switches to prevent operation when cover housing is removed, and rear bumper that facilitates pad changing. Read More

Machinery & Machining Tools, Portable Tools

Burnisher features electronic speed stabilization.

May 8, 2006

Rated at 10 A with input rating of 1,200 W and no-load speed of 900-2,810 rpm, Model SE 12-115 includes Vario Tacho Constamatic speed stabilization, and is suited for finishing and polishing stainless steel for commercial kitchen and lab equipment. Motor has winding protection grid that deflects harmful dust and debris. Auto-stop carbon brushes protect motor from damaging arcing, while spiral bevel gears allow for efficient transfer of power from motor to spindle. Read More