United Grinding Technologies, Inc.
Miamisburg, OH 45342
May 25, 2004 MGC-Special grinding centers provide horizontal, vertical, and inclined spindle orientations to enable face, bore and diameter grinding, as well as turning, milling, boring and drilling. Equipped with hydrostatic rotary NC table, machine provides index accuracy of ± 1 arc sec and variable table speed up to 80 RPM. X-axis travels range from 1300–3300 mm, 3 independent Y-axis spindle heads travel up to 1050 mm, and Z-axis travels are up to 220 mm.

United Grinding Technologies, Inc.
Miamisburg, OH 45342
Nov 17, 2003 BP-Smart provides steady deburring, edge preparation, and polishing of hard materials such as CBN, PCD, ruby, sapphire, and industrial ceramics. It can be operated with abrasive-loaded nylon brushes for simple shapes and/or with natural bristles with diamond paste for complicated shapes. Flat components are brushed on planetary polishing table. Rotary motions of polishing table, workpiece holders, and brush produce equal controlled radius on edges of component.

International Surface Preparation
Houston, TX 77054
Oct 07, 2003 Wheelabrator® Barrel Blaster consist of 13½ in. diameter, 12 bladed wheel unit, powered by 15 hp, 3,600 rpm, NEMA T-frame, direct mounted motor. Barrel is 32 in. diameter and 37 in. deep, providing 3 ft³ tumbling capacity for up to 600 lb. Adjustable, pneumatically-operated butterfly valve allows for positive media flow control. System provides contaminant removal, peening, and surface finishing of small parts.

Palmgren Steel Products
Chicago, IL 60617
May 22, 2003 Grinders and Buffers provide de-burring, stock removal, and cleaning of rust and scale. Long life motors offer 88+ minutes of continuous use at full load with less than 1% rpm loss from stated maximum. One grinder model includes variable speed control for lower speed applications. Tool rests on grinders tilt for angle grinding.

Wheelabrator Group
Burlington, ON L7L5V5  Canada
Sep 08, 2002 Barrel Blaster allows parts to tumble uniformly in abrasive blast for cleaning and surface preparation. It consists of one 13 in. dia, 8-bladed wheel unit, powered by one 15 hp, 3600 rpm, NEMA T-frame, direct mounted motor. Its 32 in. dia barrel is 37 in. deep, providing three cubic feet tumbling capacity for up to 600 lbs. Single slide gate and pneumatically operated butterfly valve allow for positive media flow control.

Micrel Semiconductor Inc.
San Jose, CA 95131
Jul 17, 2002 Model SY89830U fully differential PECL/LVPECL 1:4 fanout buffer operates down to +2.3 V. Model SY100EP15V, rated at 3.3V/5V, offers one input as single-ended while other input to MUX is differential. It also includes V_BB reference voltage for single-ended inputs or AC-coupled applications. Each fanout buffer includes synchronous enable function that forces all outputs into fixed logic state without possibility of short, runt pulses.

OTEC Precision Finish, Inc.
Acton, MA 01720
Jun 24, 2002 ECO benchtop deburring machine offers compact footprint and requires only 115 volt, 60 Hz single phase power input. It is available with 5 liter and 9 liter processing barrels in single or twin configurations. System can be used for dry or wet processing and has optional dosing pump. ECO is suitable for small job shops, cell production within larger manufacturers, and just-in-time processes. ECOmini is designed for wet or dry, truly small scale use.

USF Surface Preparation Group
Newnan, GA 30265
Apr 08, 2002 Super III Tumblast(TM) uses 15 in. bi-directional wheel with patented curved blades to provide batch cleaning of castings, forgings, and other metal working pieces. Its 14 cu ft work capacity makes it suitable for scale, rust, sand, and contaminant removal; preparing surfaces for coating, grinding or machining; and deflashing, deburring, and shot peening. Abrasive recycling system reclaims and recycles media to minimize abrasive expenditure.

Mori Seiki USA Inc.
Rolling Meadows, IL 60008
Feb 14, 2002 ASL 2400 2-axis CNC lathe provides finishing on wheels up to maximum of 24.5 in. It has one-micron encoders, precision spindle balanced to less than 3 g, and box-way construction for heavy metal removal while maintaining accuracy during interrupted cuts. Maximum spindle speed is 3,000-rpm with acceleration/deceleration time of less than 3.4 sec using standard finger chuck, top tooling, and wheel rams.

Micrel Semiconductor Inc.
San Jose, CA 95131
Feb 05, 2002 Model SY58016 differential CML buffer offers -3dB bandwidth greater than 7GHz, 45ps max rise/fall time, less than 1.5ps RMS jitter, and internal 50 ohm termination. Manufactured with high-speed 0.6um ASSET-2 Silicon Germanium (SiGe) process and promoting data rates in excess of 10Gbps, it is available in 16-pin MLF package or die form. Operation is guaranteed from 3.3V +/-10% power supply over -40 to 85 degrees C.