Sunnen Products Co.
St. Louis, MO 63143
Oct 16, 2009 Suited for engine cylinders and cylinder liners with bore diameters from 2.25-12 in., Precision Hone Tooling System incorporates integral air gaging with automatic shutdown mechanism for non-contact, in-process bore sizing to tolerances of 0.0002 in. Tools use custom-designed and fitted multi-stone tool heads, with number and placement of stones dictated by application. Three abrasive options include diamond or CBN, aluminum oxide/silicon carbide, and abrasive impregnated filament.

DeVilbiss , ITW Industrial Finishing
Glendale Heights, IL 60139
Aug 28, 2009 Packaged in blow-molded case, StartingLine Complete Autobody Prep Kit is comprised of primer spray gun and 6 in. palm sander. Chrome-plated HVLP primer gun has 1.8 mm fluid tip setup and 600 cc aluminum gravity cup and uses 13 cfm @ 30 psi inlet pressure. With Velcro pad and free speed of 8,500 rpm, palm sander operates at max inlet pressure of 90 psi. Kit also includes required wrenches for spray gun and sander as well as set of 6 in. sanding discs in assorted grits.

Dynabrade, Inc.
Clarence, NY 14031
Aug 12, 2009 Powered by 1.3 hp air motor that promotes smooth and controlled operation, Model 52657 may be used on various materials for sanding and deburring applications, surface conditioning, weld preparation, and removing paint/rust. Tool operates at 6,000 rpm and accepts 7 in. dia abrasive discs with 7/8 in. center hole. While vibration-dampening side handle is removable for left- or right-hand use, exhaust system rotates 360° to accommodate operator.

Washington Mills Ceramics
Sun Prairie, WI 53590
Aug 04, 2009 Characteristically lightweight and clean, all-natural DURALITE® is formulated without synthetics or resins to ensure instant, constant, and aggressive cutting action throughout mass finishing operations. DURALITE II, which excels on machined aluminum parts as well as fragile/delicate parts and castings, offers alternative to plastic media for light deburring and surface conditioning on softer metals. DURALITE II-S includes silicon carbide abrasive for mild cutting action.

Esco Tool
Medfield, MA 02052
Jul 06, 2009 Capable of removing membrane and overlay from tube's outer surface, as well as bevel tube simultaneously, Membrane Removal Head is designed to fit 5 different MILLHOG® tools that cover tube range from 7/8-3 in. OD. It features Golf T inserts, which can be installed and removed without wrenches, and eliminate screws and head breakage. Head is available in 2 styles; to remove membrane only or to remove membrane and overlay.

Malish Corp., Plastic Div.
Willoughby, OH 44094
Jun 22, 2009 Diamabrush(TM) System is comprised of 4 tools, each designed to be used on standard low pressure commercial cleaning machines for concrete floor polishing, mastic removal, and hardwood prep. A 25 grit spring metal tool prepares concrete floor for epoxy recoating, and 6 tools, from 100-2,00 grit, are used to grind and hone. Other offerings include Diamabrush(TM) Mastic Removal Tool and Diamabrush(TM) Hardwood Prep Tool to remove polyurethane off of hardwood floors.

Weiler Corporation
Cresco, PA 18326 0149
Jun 22, 2009 Stem mounted end brush with nickel-plating has high melting point and conforms to military specifications for nuclear applications. It is suited for weld preparation and cleaning, cleaning and finishing recessed areas or ID's, and die, mold and tool cleaning and polishing. Crimped wire (solid end) brushes are available in ½, ¾, and 1 in. dia with trim lengths ranging from 7/8 to 1 1/8 in., while knot wire (hollow end) brushes are available in ¾ and 1 1/8 in. with 7/8 in. trim length.

CGW, Camel Grinding Wheels, USA
Niles, IL 60714
May 28, 2009 Designed to smooth die and mold surface finishes, polymer lapping product line consists of 8 tools and 2 abrasive compounds. Eight polymer tools are made in varying shapes and sizes and are used on air grinding tools, and abrasive compounds are available in 400 and 600 grits and must be used in conjunction with polymer tools. Technology aids efficiency of hand-applied micro-finishing process.

Pro-Link, Inc
Canton, MA 02021
May 20, 2009 Made from 100% recycled polyester material, Maroon Strip CF Pad suits all kinds of floors and floor finishes including wood floors covered with water-based urethane finishes and stone or terrazzo floors. Measuring 3/8 in. thick, pad follows contours of floor.

Weiler Corporation
Cresco, PA 18326 0149
May 01, 2009 Working with steel, iron, and other ferrous metals, Vortec Pro(TM) wheels are reinforced with fiberglass webbing for stability and resin-bond-formulated for aggressive stock removal and accelerated cutting. Type 27 grinding and cutting products, offered in 4-7 in. dia, have aluminum oxide grain and are designed for use on right-angle grinders. Available from 2-7 in. dia, Type 1 cutting wheels have same grain, incorporate metal ring around hub, and may be used on wider range of grinders.

VSM Abrasives Corporation
O'Fallon, MO 63366
Feb 18, 2009 Available in grits from P120-P600, COMPACTGRAIN KK712F coated abrasive accelerates completion of multiple finishing steps using single-layer abrasive. Granulates regenerate, exposing new sharp grains during use, to provide consistent and uniform surface finish throughout entire product life. In addition to flexible cotton backing, suited for mechanical pressure and hand polishing applications, features include cured resin bonded granulate construction that optimizes service life.

Anderson Products
Worcester, MA 01610
Feb 10, 2009 Controlled Flare End Brush (CFE) is designed to remove heavy weld spatter, flash, and scale in hard-to-reach areas such as right angles and corners. Patent-pending design reduces filament fatigue resulting in less wire breakage in heavy-duty fabrication applications. Product is available in both steel and stainless steel wire with .0104, .014, and .020 dia, while brush diameters include ½, ¾, and 1 in. in various trim lengths.

Rex-Cut Products, Inc.
Fall River, MA 02720
Jan 26, 2009 Megabrite(TM) Non-Woven Abrasives include unitized Type 1, convolute, and Type 27 wheels, mounted points and their finishing flap discs. They are manufactured by compressing non-woven synthetic fiber material with resin and abrasive grains. Open structured products are offered in soft to hard densities (2-9) and coarse to very fine grit. Flap discs blend and finish weld in one operation, and mounted points come in variety of A, B, and W industry standard shapes and sizes.

VSM Abrasives Corporation
O'Fallon, MO 63366
Oct 17, 2008 Designed to work with heat-sensitive materials such as stainless steel, titanium alloys, and superalloys, CRIMSON red SK855X features aggressive grain orientation and cool cut feature to optimize cut rate. Self-sharpening ceramic grain promotes service life, and available grits range from 24-120. Suited for medium- to high-pressure backstand and power assist applications, solution can satisfy various grinding applications in belt and disc form.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Sep 24, 2008 Powered via 12 V Max Litheon(TM) battery system, PS50 Multi-X(TM) uses modular accessories to achieve multifunctional operation with tool change times down to 60 sec. Included adaptor enables use of Dremel, Fein, or Proxxon accessories. Weighing 2.2 lb, multi-purpose oscillating tool features 240° adjustable tool holder; variable speed dial (5,000-20,000 rpm); and ergonomically designed chassis that has soft grip surface with 6.88 in. circumference for optimal maneuverability.

Weiler Corporation
Cresco, PA 18326 0149
Apr 17, 2008 Burr-Rx(TM) disc brushes are made of black nylon filaments co-extruded with high aggression ceramic grains. Constructed with steel shell, they provide dimensional stability, and are produced with 2 in. bore that allows for direct mounting on equipment without need for adapters. Burr-Rx brushes are suited for deburring materials such as inconel, stainless steel, and titanium and are also available in stem-mounted wheel, mini disc brushes, and banded end brush configurations.

CGW, Camel Grinding Wheels, USA
Niles, IL 60714
Feb 13, 2008 Measuring 6 x 9 in., non-woven hand pads include 5 types in premium line and 3 types in standard line. Premium line, constructed from strong and flexible materials, includes maroon-colored pads for all-purpose use, grey-colored pads for fine finishes, green-colored pads for general cleaning, tan-colored pads for heavy-duty use, and white-colored pads for light-duty work. Standard hand pad line includes maroon-, green-, and white-colored pads.

Electronics, Inc.
Mishawaka, IN 46545
Jan 02, 2008 Used to quantify intensity of shot stream during shot peening process, Almen A, N, or C strips are available in Grades 3, 2, 1, and 1-S. They can be provided to any specification, from standard MIL to rigid aerospace, and conform to width, height, thickness, flatness, and hardness requirements. Pre-qualified and ready-to-use, products are subject to heat treatment process that promotes control of hardness and flatness while eliminating decarburization potential.

American Beauty Soldering Tools
Clawson, MI 48017
Aug 02, 2007 Prolonging life of industrial soldering irons, Soldering Iron Maintenance Kits include everything necessary to remove flux residue, contamination, and oxidation that builds up between inside of iron's heating element and surface of tip. Each kit contains spiral brush with ¼ in. hex shank to fit most drills, steel wire brush, and non-woven abrasive pads that wrap around tip's shank. Five kits for servicing 40-550 W soldering irons and complete kit for all sizes are offered.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jan 23, 2007 Pyro-Tape 682-Series tapes are for use in plasma spray masking, heat protection, and abrasion-, chemical-, and electrical-resistance applications. Able to withstand temperatures to 500°F, 682-PM is for plasma spray masking, 682-HR is heat reflective tape for components and pipes, and 682-CR is non-stick and corrosion-resistant. Type 682-DS is double-sided tape, while 682-ER is used for electrical insulation. Used to provide abrasion-resistance, 682-AR functions at up to 200°F.