Walter Surface Technologies    Windsor, CT 06095
May 25, 2012 Used for finishing steel and stainless steel as well as aluminum and other alloys, ENDURO-FLEX features design and flap configuration with cloth and abrasive composition. Disc produces consistent surface finish, and backing can be trimmed down in order to increase operational longevity. Latter results in decreased disc changeover requirements as well as reduced waste. With Grit 40, 5 in. disc removes up to 2,500 g over its lifespan.

Walter Surface Technologies    Windsor, CT 06095
May 17, 2012 Designed for extended life and to minimize changeovers, ENDURO-FLEX finishing disc has flap configuration with cloth and abrasive composition. Backing can be trimmed down, adding longevity to product. Design promotes consistent surface finish and material removal; 5 in. disc with Grit 40 removes up to 2,500 g over its lifespan. Suitable areas of use include finishing steel and stainless steel, aluminum, and other alloys.

CGW-Camel Grinding Wheels    Niles,, IL 60714
May 09, 2012 Abrasive nylon flap wheel drums, made of flexible nylon abrasive filaments, come in 46 and 80 grit sizes. Stainless steel wire flap wheel drums are made from .008 in. thick stainless steel wire that does not leave oxidizing deposit on work surfaces. Brass plated wire flap wheel drums, made from wire that will not scratch harder metals or create sparks, comes in .008 and .0120 in. thicknesses. All come in 4 x 2¾ x ¾ in. keyhole arbor, 4 x 2¾ in. x 5/8-11-hub, and 4 x 4 x ¾ in. keyhole arbor.

Rex-Cut Products, Inc.    Fall River, MA 02720
Apr 17, 2012 Stainless Steel Tube Finishing Kits grain-in or polish railings from weld removal to final finish in 3 steps. SS Tube Satin Finish Kit #749000 produces No. 4 food grade finish and includes 4½ x 7/8 in. medium and unitized 25FN discs, and 1½ x 23 in. Tex-Belt AO fine. For highly reflective finish, SS Tube Polish Kit #749001 produces No. 7 finish and includes 4½ x 7/8 in. medium and unitized 25FN discs, 4½ in. cotton felt disc, and 5 x 1 3/8 in. very fine rouge stick.

NLB Corporation    Wixom, MI 48393 2824
Mar 27, 2012 Using simple conversion kit, 125 Series water jet pump units can be converted to any of eight operating pressures from 6,000 to 40,000 psi. Series features flow ranges of 4.4 to 32.5 gpm and choice of 125 or 145 hp diesel or electric engine. Unit's ultra-high pressures offer flexibility to do diverse jobs with a single water jet pump unit. Applications include contractor and industrial uses such as, surface preparation, pipe/tube cleaning, concrete hydrodemolition, and more.

Tyrolit    Westborough, MA 01581
Oct 27, 2011 Featuring reinforced carbon fiber core that can be reused several times with addition of segments, GENIS CF Wheels are suitable for external cylindrical grinding of automotive components. Units feature thermally stable CBN grains within wear-resistant, vitrified bond, and porous abrasive layer that minimizes friction and heat generation in cutting zone. Wheels up to 700 mm dia are available for grinding truck crankshafts, while wheels up to 250 mm wide can be supplied for camshaft production.

Abtex Corp.    Dresden, NY 14441-0188
Oct 18, 2011 Accommodating needs of industries working with alloy steel parts, ceramic filament brushes are mounted in molded, composite material, feature hard, durable grain that produces sharp cutting edges as it wears. Available in every brush configuration, abrasive tools are designed to be application specific.

Saint-Gobain Abrasives, Inc.    Worcester, MA 01606
Oct 17, 2011 Available in 4½, 5, and 7 in. sizes, SG Blaze® Rapid Strip(TM) depressed center stripping and light stock removal disc features Type 27/fiberglass backing. Combination of ceramic alumina grain and open, aggressive mesh structure accelerates cutting and promotes longevity. Design also allows aggressive cutting on metal surfaces as well as elimination of loading on sticky coatings, adhesives, and soft metals. In addition, it will not snag or shed when used to deburr edges.

Saint-Gobain Grains & Powders    Worcester, MA 01615
Jul 20, 2011 Suited for metal fabricating industry, SG Blaze® R980P and TwinStar Quick Trim Flap Discs feature plastic back plate that enables full use of flaps and 100% abrasive material consumption. Quick Trim Norton SG Blaze R980P Type 27 flap discs have ceramic alumina abrasive grain and grinding aid to extend working life on hard-to-grind materials. Blaze R980P Quick Trim flap discs offer grinding lubricant which promotes accelerated and cooler cutting for improved part finish and integrity.

CGW-Camel Grinding Wheels    Niles,, IL 60714
Jul 18, 2011 Manufactured with self-sharpening ceramic grain and polyester flap backing, C3 Trimmable Flap Discs provide aggressive cutting action on materials such as stainless steel. Hybrid flap design compresses and compacts flaps at 4° angle for additional edge strength. Available in 4 ½-5 in. diameters, discs feature 7/8 in. arbor holes or 5/8-11 hub and come in grit sizes of 40, 60, or 80. Discs provide contaminate-free results and will not rust stainless steel.

Fieldtex Products, Inc.    Rochester, NY 14623
Jul 18, 2011 Flexible and conformal, Ice Tape cools by evaporation to deliver instant relief from swelling and pain associated with strains, sprains, and bruises without causing undesirable pressure. Product does not involve chemical reaction; users soak tape and apply to injured/sore area. Gel-embedded, self-adhering tape cools while it supports and may be used on people as well as animals. Equine Ice Tape is specifically designed to treat arthritic joints, soft tissue, tendons and ligaments.

CGW-Camel Grinding Wheels    Niles,, IL 60714
May 24, 2011 Featuring high concentration of diamond grit and solid steel body, CGW diamond wheels produce fewer sparks, no odor, and minimal material debris. They will not fracture during use, increasing safety, and consist of type 29 depressed center grinding wheels, type 1 notching/grinding wheels, and 16-20 in. combination cutting wheels. Intended for chop saws, stationary saws, gas saws, and rail cutting machines, each wheel type suits specific applications.

Saint-Gobain Abrasives, Inc.    Worcester, MA 01606
May 24, 2011 Intended for metal fabricating industry, Norton Vortex Rapid Finish Non-woven Right Angle Discs prepare surfaces before coatings/plating, perform light cleaning, and remove blemishes after welding stainless steel. Units feature thick nylon web for extended life and porous design for cool cutting. Type 27 Depressed Center discs are available in 4½ x 5/8 to 11 in. and 4½ x 7/8 in. sizes with aluminum oxide abrasive, and grit size of 100-120 with medium grade.

Weiler Corporation    Cresco, PA 18326 0149
May 23, 2011 Designed to address almost any automated deburring need, Burr-Rx(TM) Brushes feature black nylon filaments that are co-extruded with engineered ceramic abrasive grain. Extreme aggression of brushes minimizes cycle times by allowing use of high feed rates and short dwell times. Burr-Rx(TM) Brushes are suited for deburring tough materials such as Inconel, stainless steel, and titanium.

Rex-Cut Products, Inc.    Fall River, MA 02720
May 16, 2011 Made of cotton fiber impregnated with abrasives, Smooth Touch(TM) Deburring, Blending, and Finishing Wheels run smoothly and will not change geometry of pipe threads. Wheels are available in 2, 3, 4, and 6 in. diameters measuring 1/8, ¼, or ½ in. thick with coarse, medium, or fine grits. They are suited for cleaning oil field pipe threads made of stainless steel, Inconel, and other super-hard alloys, as well as iron and aluminum.

Buehler, Ltd.    Lake Bluff, IL 60044
Mar 24, 2011 When paired with MetaServ® 250 grinder-polisher, Vector® LC 250 Power Head upgrades from manual to semi-automatic preparation of material samples. Unit provides single-force pressure from 0-11 lb on 1-4 samples. Pressure is set individually for each sample using analog pressure setting display on front. Power head, which does not rotate, uses mechanical sample loading and head positioning.

Norton Company    Worcester, MA 01615 0008
Mar 15, 2011 Norton NorZon® BlueFire(TM) F826 Fiber Discs are available as Speed-Change fiber discs with twist-on and off Speed-Change fasteners, which are available in 5-7 in. sizes and lock to standard back-up pads. BlueFire F826 AVOS products have transparent design and scooped holes that create air flow for cool cutting. Blend of zirconia alumina and ceramic alumina abrasive on products offers micro fracturing capability that allows constant supply of self-sharpening cutting edges.

Rush Machinery, Inc.    Rushville, NY 14544
Mar 04, 2011 Built with heavy-duty, one-piece, cast iron base that provides rigidity and minimizes vibration, Model FC-250W is designed for truing and dressing of flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs. In addition to automatic power zoom and 2-axis DRO for measurement, features include computer-driven vision system with software program specific to this machine and its various applications.

Tyrolit    Westborough, MA 01581
Feb 23, 2011 Intended for internal/external honing of gear teeth, MIRA hard machining consumables use fused abrasives that promote extended lifecycle while reducing cycle time by allowing for increased feed rates. Resin-bonded rings use aluminium oxides embedded in epoxy matrix, and compound rings feature construction with vitrified conglomerates embedded in resin matrix. Vitrified rings, for high performance gear honing, are capable of stock removal rates as high as 0.1 mm per flank.

Weiler Corporation    Cresco, PA 18326 0149
Jan 28, 2011 DUALLY(TM) stringer-bead wheels facilitate practice of periodically switching mounting position in order to maintain speed and effectiveness of weld cleaning brushes during pipeline construction. To eliminate interference issues, design features nut with hex on each side of wheel tall enough to ensure adequate clearance on tool. Stringer-bead twist puts sharp wire tips at end of knot, allowing wheel to immediately cut through slag, spatter, and oxidation.