Wheelabrator Group - Parts & Service    La Grange, GA 30240
May 25, 2007 Designed for machines that must meet surface preparation requirements of pipe coating industry, Upblast EZEFIT(TM) Wheel covers 2-120 in. dia pipe sizes and offers bidirectional operation for clockwise or counterclockwise applications. It mounts in blast cabinet and is positioned under pipe to maintain close and consistent distance to underside portion of pipe. Location results in removal of contaminants while achieving surface profile needed for effective bonding of protective coating.

CGW-Camel Grinding Wheels    Niles,, IL 60714
May 24, 2007 Engineered for cleaning of welds and removal of abrasive clogging materials, EZ Strip Non-Woven Wheels come in 4½ and 7 in. diameters with 7/8 or 5/8-11 arbor holes. Red wheels are suited for finishing angled and irregular surfaces, while black wheels are intended for cleaning and satin finishes. All can be used on stainless steel, aluminum, steel, non-ferrous materials, fiberglass, and stone.

Parker Hannifin Corp.    Houston, TX 77087
May 24, 2007 Featuring automatic cycle start triggered by tube insertion, Parflange 1050 produces 37° flares or flat-face flanges for tube assemblies. Depending on tube material and wall thickness, unit can accommodate max tube capacity of 1½ in. OD. Workstation includes automatic tool lubricator and automatic die clamping mechanism with operator safety shield. Able to hold up to 10 pin and die sets, machine is designed for mobility by wheels, forklift, or crane.

Dynabrade, Inc.    Clarence, NY 14031
May 22, 2007 Equipped with 1 hp variable speed motor, Stationary Versatility Grinder utilizes ¼ x 2 in. wide x 72 in. long abrasive belt that can travel in either forward or reverse motion. Pivot mount assembly allows operator to adjust sanding belt to any angle for optimum comfort, while 4 in. diameter vacuum port enables connection of dust collection systems. Full range of contacts arms is available for grinding, deburring, and polishing applications.

J Walter, Inc.    Hartford, CT 06114
May 15, 2007 Used to match or impart perfect line grain finish on stainless steel, LINE-MATE(TM) system is comprised of LINE-MATE(TM) II electronic angle grinder, inflatable drum, and drum belts. Users can refine line finish with one of LINE-MATE's finishing drums, available in coarse, medium, fine, two-in-one, or other grits. Handrail attachment enables post-weld tubing refinishing, while polishing felt belts and drums produce mirror finish when used with WALTER white and blue polishing compounds.

Rex-Cut Products, Inc.    Fall River, MA 02720
May 14, 2007 Rex-cut® Stainless Steel Kit includes four 0.045 in. thick Alpha-Green cut-off wheels capable of cutting pipe, rod, or tube; one Sigma-Green grinding wheel that aggressively removes heavy welds with chatter-free operation; and one cotton-fiber blending and finishing wheel that reveals fresh abrasives as it works, producing 32 rms or better finish. Designed to work with right-angle grinders, above Type 27 wheels measure 4½ in. dia.

CGW, Camel Grinding Wheels, USA    Niles, IL 60714
Apr 16, 2007 Designed for cutting soft metals such as aluminum, 36-grit flap discs contain calcium stearate coating that liquefies under heat to keep them cool and to prevent loading on soft materials. Manufactured from blue-fired aluminum oxide grain and polyester heat-treated backing, discs can also be used on brass, copper, and zinc. Products are available in 4½, 5, and 7 in. dia.

Rex-Cut Products, Inc.    Fall River, MA 02720
Mar 19, 2007 Rex-Cut® FUSION(TM) Flap Disc features interleaf construction that combines coated abrasive layer and surface conditioning layer. Design constantly reveals fresh abrasives to remove welds, light burs, and surface roughness, leaving smooth finish on stainless steel structures in one operation using right-angle grinder. Disc is offered with coarse, medium, and very fine grits in 4½ and 5 in. dia sizes to promote material removal and smooth operation.

ATI Industrial Automation    Apex, NC 27639
Mar 13, 2007 Suited for robotic and automated material finishing operations on aluminum, plastic, and steel, VersaFinish(TM) has floating motor and spindle arrangement that provides finishing tip's axial compliance to perform consistently on irregular part patterns. Motor maintains working spindle speed of 2,600 rpm, and compliance force is 3.2-16.7 lb at air supply pressure of 5-60 psi. Rotating spindle is equipped with 3/8 in. chuck to hold variety of finishing devices.

CGW, Camel Grinding Wheels, USA    Niles, IL 60714
Mar 12, 2007 Available in 7-14 in. diameters, Ruby Surface Grinding Wheels feature ruby aluminum oxide grain that provides sharp, friable abrasive engineered for grinding all tool steels, including steel with high levels of chromium. Wheels offer strong form-holding capabilities and require fewer dressing intervals.

Esco Tool    Medfield, MA 02052
Feb 21, 2007 Powered by 2/3 hp pneumatic motor, Mongoose MILLHOG® machines stainless steel and other highly alloyed materials. Designed for beveling any angle of prep on water wall boiler tubes, unit requires only 2¼ in. clearance and can bevel tubes from 5/8 in. ID to 3 in. OD. Tool features EscoLock(TM) rigid blade lock system with TiN-coated bits, dual-opposed tapered roller bearings with right angle gears, push-pull clamp and release mechanism, and permanently attached wrenches.

Aremco Products, Inc.    Valley Cottage, NY 10989
Jan 23, 2007 Pyro-Tape 682-Series tapes are for use in plasma spray masking, heat protection, and abrasion-, chemical-, and electrical-resistance applications. Able to withstand temperatures to 500°F, 682-PM is for plasma spray masking, 682-HR is heat reflective tape for components and pipes, and 682-CR is non-stick and corrosion-resistant. Type 682-DS is double-sided tape, while 682-ER is used for electrical insulation. Used to provide abrasion-resistance, 682-AR functions at up to 200°F.

Wheelabrator Group    Burlington, ON L7L5V5  Canada
Jan 04, 2007 Operating from 230 or 460 V, Smartline(TM) Basket Blaster is equipped with removable rotating load basket to tumble parts as they are being blasted from bottom of heat-treated steel basket. Basket is 20 in. dia x 27 in. long with max capacity of 224 lb. Machine also includes gravity reclaim system and integral bag type dust collector. Skewer system adaptation is available for low production quantities where relatively large parts can be affixed and rotated for overall cleaning.

Rex-Cut Products, Inc.    Fall River, MA 02720
Dec 22, 2006 Suitable for industrial fabrication and maintenance purposes, Sigma Screen(TM) depressed center Type 27 wheel with 4.5 in. dia features blend of zirconia-ceramic abrasive grains bonded to flexible mesh for grinding, blending, and finishing applications. Cool-running, chatter- and clog- free mesh wheel is available with coarse, medium, and fine grits. Several wheels can be stacked onto grinder and they can be used on stainless steel, metals, aluminum, composites, and wood.

Kärcher    Camas, WA 98607
Dec 04, 2006 Eliminating need to disassemble machinery before it is cleaned, Model IB 15/80 uses 150-3,000 cfm compressed air to propel tiny dry ice pellets at supersonic speeds so they flash freeze to lift grime, paint, rust, mold, and other contaminants from metal surfaces. CO₂ pellets are non-abrasive, non-toxic, and non-hazardous, and, since they vaporize into air, there is no wastewater or solvents to dispose of. Blaster operates on 120 V, 5 A and uses 44-230 psi pressure.

Weiler Corporation    Cresco, PA 18326 0149
Nov 16, 2006 Exhibiting shock resistance and dimensional stability, Nylox® Composite Metal Hub Wheel Brushes (NMX) are constructed with steel shell and designed for optimal density. Polymer technology retains brush filaments, eliminating need for internal metal components, and NMX technology allows for multi-section stacking. Crimped or rectangular filament wheels, both made with silicon carbide, have 2 in. bore that allows for direct mounting on equipment without adapters.

Saint-Gobain Abrasives, Inc.    Worcester, MA 01606
Nov 15, 2006 With blaze orange grain-side color, Norton SG® BLAZE R980 discs cut materials such as stainless steel, cobalt, chrome, inconel, and titanium. Conical shaped Type 29 flap wheels; single- and 3-ply Speed-Lok discs; and Type 27 flat discs feature wear resistant ceramic grain, polyester backing, and grinding aid. Each grain continually fractures in grinding process, along sub-micron faults in crystalline structures, repeatedly exposing new sharp cutting edges.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Nov 06, 2006 Measuring 42 x 30 x 75 in., twin spindle RSSA-6 blast cabinet employs 2 side-by-side spindles for pressure cleaning or surface preparation of IDs and ODs of cylindrical components. Each spindle is topped with mini-turntable fixture that secures component during processing, and 2 pressure-blast nozzles traverse vertically to provide thorough coverage of full part height. Programmed blasting routine is followed by automatic blow-off and media recharge cycles.

Viking Corporation, Blast & Wash Systems    Wichita, KS 67226
Nov 06, 2006 Utilizing six 15 hp VC-1 direct driven center-fed blast wheels for cleaning, Model RT 9616-SP is used for exterior surfaces of plates up to 8 ft wide and 3 in. high and structurals up to 16 in. wide and 24 in. high. Dual direction, powered roller table conveyor system features variable travel speeds ranging from 1-20 fpm. Variable feed rate can be adjusted to provide surface finishes ranging from SSPC-7 brush off finish to SSPC-5 white finish.

Esco Tool    Medfield, MA 02052
Oct 25, 2006 Prepzilla MILLHOG® features rigid blade lock system and T-15 tool steel cutter blade that transfers heat away from pipe surface to chip. Suited for prepping Super Duplex, stainless steel, and other hard pipe, it can sever 8 in. schedule 160 pipe within 10 min and then compound bevel and face it simultaneously. Tool has one mandrel and 8 sets of clamps for prepping pipe from 1.5 in. ID to 8.625 in. OD. It generates 1,500 lb-ft torque at cutting blade.