Sandvik Materials Technology, Strip Products Div.
Benton Harbor, MI 49022
Sep 25, 2009 Used to lower heavy tools and instruments into oil and gas wells, Bright Surface Slicklines feature smooth surface that minimizes friction, maximizing life expectancy of pulleys, sheaves, and counters. Smooth surface also minimizes microscopic pores, which can lead to pitting, especially on line exposed to aggressive conditions encountered in deepest part of well.

IBAG North America
North Haven, CT 06473
Jan 10, 2008 Utilizing synchronous, dc motor technology, 20 and 22 mm diameter Compact Spindles operate up to 100,000 rpm with 260 W continuous power. Units feature ultra precision with less than 2 microns run-out for optimal accuracy and surface quality. Available in ready-to-install kit with spindle and drive, electrical and pneumatic lines, and optional spindle mounting blocks, spindles are suited for micro-milling and drilling as well as engraving and fine milling.

IBAG North America
North Haven, CT 06473
Oct 24, 2007 Rated at 4 hp peak and 2.6 hp continuous duty, Model HFK 95 S40 is designed for plug-and-go setup in vertical and horizontal machining centers capable of manual or automatic spindle change. Suited for precision milling, engraving, and fine drilling, it weighs 8.6 lb for toolchanger usage and is adaptable to 40 or 50 ISO or CAT taper machine. Air cooled with no chiller required, unit is equipped with portable drive system and quick release connector for air seal hose.

S-B Group
Fenton, MO 63026
Feb 14, 2007 Designed to fit onto any 3/8 in. reversible corded or cordless power drill, RiveDrill(TM) allows operator to set up to 14 rivets/min. Model RT120HP is intended for heavy-duty blind rivets, while Model RT110 is for standard blind rivets, and Model NT850 is for rivet nuts. Requiring 6.6 lb of pressure to operate, portable RiveDrill is suited for automotive, small aircraft and boat repair, as well as general facility maintenance and repair.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005-2550
May 05, 2005 Heavy-duty Right Angle Drill attachment, model 49-22-8510, enables users to work in tight spaces and facilitates drilling of holes or driving of screws. Suited for use with cordless 2.4 V or larger drills, product fits any ¼ in. or larger chuck and measures 2 in. wide. Attachment can control up to 235 lb-in. torque and accepts ¼ in. hex drive accessories, including screwdriver, hex drive, twist dill, and flat boring bits; extensions; and chuck adapters.

Shell Oil Co.
Houston, TX 77002
Feb 09, 2005 NEOFLOâ„¢ olefins are designed for changing environmental regulations in Gulf of Mexico and increasing standardization of environmental practices in other parts of world. Compliant with US EPA offshore discharge regulations, NEOFLO 1-58 internal olefin features linearity and purity that decreases sediment toxicity and improves biodegradability. Product also exhibits stability when exposed to extreme temperature conditions.

Ideal Industries, Inc.
Sycamore, IL 60178
Nov 11, 2004 PowerBladeâ„¢ Cable Cutter installs like drill bit on virtually any corded or uncorded drill with 3/8 in. drive shaft. With turning action of drill, it provides needed force to cleanly slice through up to 750 MCM hard-drawn copper cable or up to 1,000 MCM aluminum cable with minimal cable distortion. Adjustable torque arm securely holds drill in place, while textured Santoprene® grip provides control and minimizes vibration.

Sandvik Coromant Co.
Fair Lawn, NJ 07410
Sep 28, 2004 CoroDrill 880 uses Step-Tech insert technology for cutting force balance, as shape of insert center facilitates smooth entrance into workpiece. Wiper geometry and 4 cutting edges have favorable impact on hole tolerances and surface finish, suited for threading holes. Available with choice of insert geometries and grades, product is suited for use with different materials. Applications include helical interpolation, plunge drilling, and boring.

U.S. Tsubaki, Inc.
Wheeling, IL 60090 6431
Nov 13, 2003 Energy Series™ Chains are available in sizes 80–240 and up to 10 strands wide. Pins hold tight under extreme vibration, and smooth holes eliminate fatigue cracks that can compromise chain strength. Link plates help distribute loads evenly. Z-cotter connecting links hold tight, yet allow assembly and disassembly in the field. Chains are suited for on-shore and off-shore drilling applications.

ELTOOL Corp.
Cincinnati, OH 45214
Nov 06, 2003 Designed for use on machining centers that load from automatic tool changer, Titespot keyseat cutting head uses positive displacement ball piston motor powered by 300–2,000 psi coolant system. Lathe version allows keyseat cutting in combination with turning and boring operations. Spindle rotation can be used as indexer to machine multiple keyways in one part. It is suitable for machining in bores down to ½ in. ID, and cutters are available in widths from 3/32 to 1/2 in.

ELTOOL Corp.
Cincinnati, OH 45214
Aug 29, 2003 Titespot® Coolant Driven Drill Heads utilize high-pressure coolant systems, from 200–1,500 psi, to drive integral positive displacement ball piston motor. Products feature hardened spiral miter gears and compact head profiles that eliminate secondary operations. Capable of multi-position machining in 1 in. diameter bores, products can function as indexers, allowing multi-position machining with one angle head and one set-up.

ELTOOL Corp.
Cincinnati, OH 45214
Jun 05, 2003 Driven by high-pressure 300–1,500 psi coolant, custom drill heads machine at any angle from 90–0° and do not require spindle rotation for power. Where multi-position machining is required, spindle can function as indexer, eliminating need for multiple mechanically driven heads or parts indexers. Capable of speeds to 13,500 rpm and output to 1.5 hp, heads are available in 3 sizes and can machine radially in cavities as small as 1 in. in diameter.

Excellon Automation
Rancho Dominguez, CA 90220
Feb 18, 2003 Spindle Upgrade Kit allows Uniline Series single-station drilling machines run spindle speeds up to 150,000 rpm. It contains spindle covering full range from 20,000-150,000 rpm, all electronic components for integration of spindle, as well as software modifications to enable enhanced capabilities in controller.

Huot Mfg. Co.
St. Paul, MN 55104-1701
Nov 27, 2002 Silver Deming Drill Dispenser features labeled compartments that ID each drill bit. It holds 11 most commonly used sizes ranging from 1 to 1 ½ in. and can store 2 bits of each size. Measuring 14 5/8 in. wide by 7 3/8 in. deep by 7-3/4 in. high, dispenser fits on shelf, in cabinet, and on top of work bench. It is fabricated from heavy-gauge steel with epoxy powder finish.

Huot Mfg. Co.
St. Paul, MN 55104-1701
Oct 01, 2002 Tooling dispenser can be added to pre-existing workbenches as under-mount drawer, allowing users to store materials to avoid clutter in their workspace. Drawer provides up to 75 compartments to organize various tooling. Measuring 26 1/8 x 12 1/2 x 3 in. (W x D x H), it comes with built-in cam-lock. Equipped with heavy-duty ball bearings, drawer slides smoothly during opening and closing. Drawer is also available with marking for three drill types.

Centerline Centroid, Inc.
McHenry, IL 60050
Jul 18, 2002 Universal Angle Heads (UAH) enable drilling, milling, and other metalcutting operations to be performed at any angle between ±90°. Shot pins are inserted at any angle to suit customer requirements and any number of angles may be selected. UAH 140, 175, 205, and 240, sealed, maintenance-free units cover spindle tapers from 30 to 50 BT-CT-DIN-HSK. Maximum tool dia that may be clamped in ER collet varies from 0.4 to 0.8 in. according to model.

TechniDrill Systems Inc.
Kent, OH 44240
Apr 03, 2002 Model 200 BTA system has drilling capacity of 2.5 in. dia and 84 in. effective drilling depth. It is equipped with special refrigeration for proper coolant temperature control. Counter-rotation of workpiece helps system attain close tolerances. System drills nickel-base Inconel 600 and 700 series workpieces at penetration rate of 1.5 in./min.

Lobster Tools/S-B Industries, Inc.
Fenton, MO 63026-2914
Mar 21, 2002 RiveDrill(TM) converts cordless electric, electric, and pneumatic power drills into blind rivet guns. It sets up to 14 rivets per minute, and requires 6.6 lbs of pressure to operate. Suitable for light- to medium-duty applications, RiveDrill attaches to 3/8 in. reversible power drills. It sets any standard blind rivet up to 3/16 in. aluminum, and comes equipped with nosepieces for 1/8, 5/32 and 3/16 in. sizes.

Huot Mfg. Co.
St. Paul, MN 55104-1701
Feb 12, 2002 Metric Cabinet is 14-5/8 in. wide x 7-3/8 in. deep x 7-3/4 in. tall, and fits onto work benches, storage shelves at workstations, or tool cribs. It has 3 drawers and 27 compartments to hold metric taps, drills and dies from 2.5 x 0.45 up to 12.0 x 1.75. Each compartment is pre-labeled on drawer-pull. Cabinet is fabricated from CRCQ steel with phosphate pretreatment and powder coat finish.