Metabo Corp.
West Chester, PA 19380 4243
Nov 01, 2007 Available in diameters from 1½-6 in. and overall lengths of 12 and 22 in., carbide-tipped One-Piece Core Bits are sold in complete set with either SDS-Max or Spline drive shank. Bits are used by plumbing, electrical, and mechanical contractors in applications such as drilling for railing installations, relocating anchors, and through-wall drilling for electrical conduit, plumbing, and sanitary pipe.

Morse, M.K., Co., The
Canton, OH 44711
Oct 26, 2007 With precision hardened cutting edge on single-chip lift design, Self-Feed Wood Bits offer consistently accurate hole sizes. Self-feeding pilot screw pulls bit into and then through each cut. For fast bit changes and secure chuck grip, single-piece bits feature quick-change 7/16 in. hex shank with milled flats. Products range from 1-4 5/8 in. diameter and include 2 contractor kits and 5½ in. extension.

CS Unitec, Inc.
Norwalk, CT 06850
Jul 16, 2007 END 712 P Mini diamond drill is used for drilling dowel, anchor, and thru holes in tile, hard ceramic gres tiles, natural stone, granite, and concrete. Offering variable speed of 0-8,000 rpm, it drills without shock/hammering, eliminating cracks and blow-out. Features include 5 lb weight, 6.3 A motor with GFCI, built-in water swivel with hose connection and valve, keyless chuck, and depth gauge. Drill is suited for gravestones, countertops, plumbing, and other masonry applications.

PB Swiss Tools
Gainesville, GA 30501
Jul 05, 2007 PrecisionBits® universal bits feature color coding for different types, variations, and sizes of bits to make them easily distinguishable. Color rings denote screw size differences, while color differences show alternating bit-types. All bits feature nanotech coating for rust protection.

Hitachi Power Tools
Norcross, GA 30093
Jun 06, 2007 Diamond Grit Drill Bits, available in sizes ½, 5/8, ¾ and 1 in., are designed for use with Class 5 tile, marble, porcelain, granite, slate, and glass. Suitable for residential and commercial applications, bits feature raised lips with diamond grit particles sintered in place and core removal ejection slot. Bits are constructed of hardened and tempered thin wall alloy steel.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
Mar 09, 2007 Offered as model numbers DW1204(B)-DW1232(B), DW1263, and DW1269, cobalt PILOT POINT® drill bits are engineered for use on stainless steel and other hard metals. Each bit (3/16 in. and up) is designed with 130° pilot tip on top of 130° split point with 4 cutting edges. This minimizes walking on material and enables bit to start on contact. While open-head flute design aids material removal, no-spin shank has 3 flats that provide positive lock on chuck to prevent slippage in tool.

PFERD INC.
Leominster, MA 01453
Jan 29, 2007 Whether used for high stock removal or fine machining and deburring, HICOAT® tungsten carbide (TC) burs have proprietary coatings that promote chip removal while minimizing tool wear and heat loads. Available coatings include HC-FE multipurpose, gold coating for work on steel and cast iron; HC-HT silver coating for work on heat-resisting, nonferrous metals; and HC-NFE black, anti-adhesive coating for work on sticky, nonferrous metals that produce long chips when machined or cut.

Hitachi Power Tools
Norcross, GA 30093
Jan 15, 2007 Offered in 3/16, ¼, 9/32, 5/16, and 3/8 in. sizes, diamond grit drill bits cut through marble, porcelain, granite, and slate. They feature raised lips with diamond grit particles sintered in place allowing diamonds to adhere to bit. Hollow barrel of bit creates core to guide drill, and core removal ejection slot pushes core material out from bit. Constructed of tempered thin wall alloy steel, bits require water lubrication during use.

Command Tooling Systems LLC
Ramsey, MN 55303
Oct 03, 2006 Available in .468-3.960 in. diameters for reaming holes with diameters of 1.72-3.96 in., Urma CircoTec RX Reamers utilize cutting inserts with multiple cutting edges for delivering repeatability of under 4 microns in run-out. Reamers feature adjustable tool length, and are available in straight shank and Beta Modul® systems. Carbide or cermet inserts are available in uncoated and coated versions.

Genevieve Swiss Industries Inc.
Westfield, MA 01085
Oct 02, 2006 Designed for Swiss Type lathes, Floating Reamer Chuck can move parallel off center up to .009 in., and can be used in live tool spindles as well as static ID positions to ensure accuracy of small holes. Design prevents reamer from breaking by aligning tool with drilled hole. Spring-loaded bearing ensures reamer always returns to center. ER-8 Style comes in shank sizes of 8, 10, 20, and 22 mm as well as ¾ and 1 in., while ER-11 Style comes in 10 mm, 22 mm, and ¾ in shank sizes.

Sandvik Coromant Co.
Fair Lawn, NJ 07410
Oct 02, 2006 CoroDrill 880 has center insert that uses Step Technology to facilitate smooth entrance into workpiece and perfectly balance cutting forces. To hold tight tolerances and achieve optimal surface finish, its inserts present 4 cutting edges and wiper geometry. Choice of insert geometries and grades are available for various applications and materials, including helical interpolation, plunge drilling, and boring. Diameters range from .473-2.5 in.

RotoZip by Bosch
Mount Prospect, IL 60056
May 17, 2006 Multi-purpose 5/32 in. XB-MPGP2 Tracing XBIT(TM) makes correct cuts every time by avoiding object behind surface and only cutting out material desired. To use bit, users plunge directly into workpiece and bit is driven in one direction until it hits edge of object being cut out. Using object as template, users follow edge around to complete cut. Compatible with RotoZip and Spiral Saws®, bit is suited for applications in materials ranging from wood to fiberglass.

Bondhus Corp.
Monticello, MN 55362 9347
May 08, 2006 Designed for use with battery powered drills and screwdrivers, Allstar bit holder incorporates 2 rare earth magnets to hold ¼ in. shank bits and screw securely in place. One magnet holds bit in place, while other securely holds fastener. Product is available individually or packaged with bit assortment, all of which are machined from European Chrome-Moly-Vanadium steel and heat-treated.

RotoZip by Bosch
Mount Prospect, IL 60056
Mar 17, 2006 Offering alternative to metal snips, shears, power shears, and nibblers, XBITS(TM) Spiral Saw® XB-MC1 provides RotoZip users with 5/32 in. diameter metal cutting bit for contractor-rated applications. Drill point tip enables users to plunge directly into material for complex cut-outs. Bit is suited for cutting duct work, auto body panels, gutters, aluminum siding, sheet metal, or studs up to 18 gauge thickness.

Valenite, Inc.
Madison Heights, MI 48071 9636
Oct 12, 2005 Available with various blade types and sizes, MODCO® PI (Padded/Indexable) reamers are suited for general-duty uses and short range applications. Modular products, custom configured to meet application specifics, can finish holes from 5.9-60.50 mm for through hole work and 7.875-60.50 mm for blind hole applications. They feature 3 top rakes and 3 entry angles. Engineering is capable of delivering H6 tolerance grade, and surface finishes as low as Ra 0.25 are obtainable.

Greenlee Textron, Inc.
Rockford, IL 61109
Oct 11, 2005 Made from high-speed steel, Combination Drill/Tap Bits allow users to drill, tap, and countersink metric hole in one motion. Units tap up to 10-gauge metal and have hex shank to ensure strong connection to drill chuck. Back taper beyond tap helps prevent thread damage from over-drilling. Packaged individually or in kits, bits are suited for electrical, HVAC, plumbing, automotive, and DIY end-users.

Valenite, Inc.
Madison Heights, MI 48071 9636
Aug 25, 2005 Capable of achieving surface finishes of Ra 0.3–0.8, MODCO® BHR (Brazed Head Reamer) Reamer series is offered with choice of ValProâ„¢ carbide grades, sizes, and shank styles. Though custom-configured to specific job needs, standard construction consists of shank and interchangeable cutting head module. Reamers, engineered for blind hole or through hole applications, offer full working diameter range of head sizes for finishing holes from 9.75–32.50 mm.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Jul 21, 2005 Type I Spur and Type II Ship Auger Bits feature Power Band Tip, which keeps all drilling power focused to cutting edge. Ranging in size from ¼-1½ in. dia with overall lengths of 7½, 13, and 17 in., Type I bits utilize cutting spur to cut clean holes in applications unlikely to encounter nails or staples. Type II units range from 3/8-1½ in. with overall lengths of 7½, 17, and 24 in. Self-feeding screw point cuts through nails, staples, and screws in soft or hard wood.

Rex-Cut Products, Inc.
Fall River, MA 02720
Feb 16, 2005 Carbide Bur Kit features 8 styles of double-cut carbide burs including ball nose, ball, bur tree, cone, cylinder, ball nose tree, flame ball nose, and cylinder with industry standard SCTI numbers. They are suitable for metal removal, weld preparation, deburring, chamfering, edge breaking, and for creating radii on all hard metals. Measuring 5 x 3 x 3½ in., protective oak box can fit on workbench or into tool kit.

LMT-Fette
Cleveland, OH 44135
Jan 26, 2005 Series SBR features fine radial adjustment for hole accuracy and compensation after regrinding. Two-point cutter clamping ensures precise support for cutting inserts. In addition to extra-wide guide strips consisting of ultra-fine grit carbide, reamers come equipped with coolant valve, making machining of blind- and through-holes possible with one tool. Internal coolant supply can be controlled by turning routing valve.