Dynabrade, Inc.    Clarence, NY 14031
Sep 22, 2011 Operating at 14,000 strokes/min, DynaPen Series features one-touch on/off button and 6 ft air line that swivels 360° for maneuverability, especially useful when working on contoured parts. In-line filter prevents debris from entering tool from air line. Available with 1/8 in. or 3 mm collet insert, DynaPen Series is suited for use on plastics, composites, steel, aluminum, and other materials found in aerospace, mold making, firearm, and machine shop environments.

Weiler Corporation    Cresco, PA 18326 0149
May 23, 2011 Designed to address almost any automated deburring need, Burr-Rx(TM) Brushes feature black nylon filaments that are co-extruded with engineered ceramic abrasive grain. Extreme aggression of brushes minimizes cycle times by allowing use of high feed rates and short dwell times. Burr-Rx(TM) Brushes are suited for deburring tough materials such as Inconel, stainless steel, and titanium.

Rex-Cut Products, Inc.    Fall River, MA 02720
May 16, 2011 Made of cotton fiber impregnated with abrasives, Smooth Touch(TM) Deburring, Blending, and Finishing Wheels run smoothly and will not change geometry of pipe threads. Wheels are available in 2, 3, 4, and 6 in. diameters measuring 1/8, ¼, or ½ in. thick with coarse, medium, or fine grits. They are suited for cleaning oil field pipe threads made of stainless steel, Inconel, and other super-hard alloys, as well as iron and aluminum.

Wilson Tool International Inc.    White Bear Lake, MN 55110
Apr 19, 2011 Available for Trumpf® or thick turret style punch presses, Wilson De-burring Tool coins small chamfer on cut edge to accurately deburr straight lines or arcs, including acute angles and very small radii. Ball assembly design minimizes setup and adjustment time by enabling operators to adjust ball pressure without disassembling tool. Ball assemblies also extend tool life when working with wide variety of sheet materials.

Parker Hannifin Corp., IPD Instrumentation Group    Huntsville, AL 35805
Mar 22, 2011 Suited for CPI(TM) and A-LOK® tube fittings, hand-operated tools include tube benders with indexing handle for ¼, 3/8, and ½ in. tubing sizes and calibration markings for left-hand, right-hand, and offset bends. Tube cutter for 1/8 and 1 1/8 in. stainless steel, steel, soft, copper, and aluminum tubing is also included, along with deburring tool for 3/16-1½ in. OD tubing. Inspection gauge and sawing vice, with hacksaw guide accommodating 3/16-2 in. OD tube, pipe, and hose, are also integrated.

Brush Research Manufacturing Co., Inc.    Los Angeles, CA 90022
Jan 13, 2011 Specialty Flex-Hones blend and radius sharp edges as well as remove microburrs on chamfered holes, eliminating stress risers caused by chamfering. Tools polish and radius outer corners as well as inner corners and hole. Flexibility also lets tool pass through thin web sections and polish chamfer on back side. In eliminating hand finishing operations, tools produce consistent finishes from hole to hole and part to part. Various grit sizes and abrasive types are available.

Rex-Cut Products, Inc.    Fall River, MA 02720
Jan 11, 2011 Rex-Cut® Smooth Touch(TM) deburing, blending, and finishing wheels are made of cotton fiber impregnated with abrasives and have bond that provides one density suitable for applications of conventional 2-9 density unitized wheels. Flexible and conformable for use on contoured and flat surfaces and to reach into corners, they offer smooth control and come in standard coarse, medium, and fine grits in 2, 3, 4, and 6 in. dia., 1/8, 1/4, and 1/2 in. thick sizes.

Mate Precision Tooling    Anoka, MN 55303
Dec 22, 2010 Designed to deburr mild steel, stainless steel, and aluminum sheet material in any thickness, Rollerball Deburr(TM) Tool performs burr removal automatically as part of punching process. No off-line manual burr removal is needed. Available for thick turret or Trumpf Style press applications, tool uses special ball in both upper and lower parts to push burr away, creating slight radius on punched edge. All part contours can be processed, including small, tight corners.

Rex-Cut Products, Inc.    Fall River, MA 02720
Aug 03, 2010 Made from non-woven synthetic that is compressed, bonded, and impregnated with abrasives, Mebabrite(TM) mounted points are designed for light deburring, blending, and polishing. They feature medium/fine grits and soft/hard densities for smooth, chatter-free operation on precision machined and cast parts without changing their geometry. Points are available in over 150 industry standard A, B, and W shapes with 1/8 and ¼ in. shanks, in aluminum oxide and silicon carbide abrasives.

Weiler Corporation    Cresco, PA 18326 0149
Apr 26, 2010 Suited for nuclear power industry where Foreign Material Exclusion programs may limit or exclude use of wire brushes in some areas during routine maintenance or repairs, Nylox® Ceramic Filament Brushes can be used for many deburring, cleaning, and surface preparation applications. Ceramic grain enables use on materials such as Inconel, stainless steel, and titanium. Models are available for Weiler/Metabo right angle grinders and Weiler/Metabo die grinders.

Maxitec Pty Ltd    New South Wales 2229  Australia
Apr 21, 2010 Mate Rollerball Deburr(TM) tool, available in thick turret and Trumpf Style versions, allows operators to perform punching/deburring of materials in one step. System utilizes Rollerball(TM) technology that uses programming capabilities of presses that operate in X and Y axes with ram down. Ball in both upper/lower sections of tool allows every part contour to be processed. Three springs that allow users to adjust tension appropriate to material being punched are also included.

Brush Research Manufacturing Co., Inc.    Los Angeles, CA 90022
Sep 25, 2009 Engineered using resin bond diamond crystals with high friability, Diamond Flex-Hone® Tools are suited for deburring, edge blending, and surface finishing in hard materials such as carbide, ceramic, or aerospace steel alloys. Premium coated abrasive aids in heat dissipation and optimizes bond retention. Tools are available in 4-20 mm diameters and 3 different mesh sizes.

Wet Technologies    Holbrook, NY 11741
Sep 10, 2009 Enabling replacement of dry grit with wet grit blasting to reduce or eliminate parent material removal, Wet Tech Process helps meet and exceed SPOP for wet grit blasting of major rotating parts. Aqueous wet and water blast cleaning equipment and machinery suit advanced applications for OEM parts cleaning. In addition to automatic pushbutton method for determining media concentration, features include stainless steel tig welded construction and gun with controllable air pressure.

Robotic Accessories    Tipp City, OH 45371 9468
May 15, 2009 Offering choice of air motor or high-speed electric spindle motor, Models DT-A390 and DT-E400 feature variable speed and 360° of uniform radial compliance to accommodate part and path variations without changes in robot orientation. Each comes with mounting saddle that provides 3 ISO bolt patterns and 5 mounting angles. For consistency, tools allow burr to accurately follow part profile, maintaining constant force on part surface.

Dynabrade, Inc.    Clarence, NY 14031
Apr 28, 2009 Available in 35,000, 50,000 or 60,000 rpm versions, Central Vacuum Pencil Grinders power optional carbide burrs and mounted points for precision deburring, engraving, deflashing, etching, cleaning, and finishing. Vacuum Shroud captures dust, debris, and contaminants, including hexavalent chromium, to external vacuum source while air-powered tool is working. Collet sizes of 1/8 and 3 mm are available, and each includes urethane vacuum shroud, air line, and vacuum hose.

CGW-Camel Grinding Wheels    Niles,, IL 60714
Nov 28, 2008 Manufactured with 3 complete layers of fiberglass and high-quality grade aluminum oxide grain, Super Quickie-Cut cut/grind combo wheels are designed for stainless steel and steel applications. They are available in type 29 shape, 46 grit size and in 4½ and 5 in. dia with 7/8 or 5/8-11 arbor holes. Combo wheel cuts by angling right-angle grinder at 90° position, and grinds when positioned at 30° angle.

SGS Tool Co.    Munroe Falls, OH 44262
Oct 21, 2008 Featuring deep flute configuration, Omega Burs provide rapid stock removal in hard materials with minimal chatter. Configuration also optimizes tool life, even when working in challenging applications such as mild steel, stainless steel, cast iron, and other ferrous metals. Targeted industries include marine and shipbuilding, offshore MRO, foundries, automotive, and metal fabrication.

Brush Research Manufacturing Co., Inc.    Los Angeles, CA 90022
Aug 08, 2008 Available in Diamond Abrasive filled nylon filament, Miniature Deburring Brushes are suited for finishing ceramic, glass, aerospace alloys, and tool steel. Brushes for thru holes (81 Series) and bottom end applications are available for holes as small as .024 and 1/8 in., respectively. Twisted-in-wire deburring brushes can be used by hand or rotated under power, and are suited for wide range of applications such as electrical/electronic, medical tubing, and aerospace.

CGW, Camel Grinding Wheels, USA    Niles, IL 60714
Jun 24, 2008 Optimized for sharp cutting action and extended working life, zirconia flap wheels have cotton-backed flaps for flexibility and ¼ in. shanks to facilitate use. Products come in 1, 1 ½, 2, and 3 in. diameters with grit sizes of 40, 60, and 80. Offered in quantities of 10, products are recommended for smoothing and deburring steel, stainless steel, non-ferrous metals, and alloys.

Rex-Cut Products, Inc.    Fall River, MA 02720
Jun 20, 2008 Cotton Fiber Finishing Sticks, available in round and square geometries, precisely fit into holes and slots for deburring, removing mold lines, finishing, and cleaning machined and cast metal parts. Featuring reinforced non-woven cotton-fiber layers with aluminum oxide or silicon carbide abrasives that are bonded and pressed together, sticks come in ¼ x 4 in. to ½ x 6 in. sizes with 24-320 grain as well as soft, medium, and hard bonds.