Deburring Media

Machinery & Machining Tools

Deburring Tool cleans and chamfers pipe inside and out.

February 26, 2015

In one revolution, tools of DEB1 Series deburr and produce clean chamfer to manufacturers' standards. Model DEB1IPS-INT fits OD pipe on one end and ID with other, eliminating need to acquire two separate tools. Suitable for PVC, CPVC, PE, ABS, and PP, this 2-in-1 tool features replaceable blades, aluminum body that promotes longevity, and knurled grip for slip-resistance. Product fits ½, ¾, and 1 in. IPS pipe. Read More

Machinery & Machining Tools

Deburring Machine offers 5-second solution.

September 23, 2014

In 5 seconds or less, Turnamat thoroughly cleans burrs from end of steel, aluminum, and non-ferrous metal pipe or tube, ridding it of potential hazards to operational quality or handling safety. Machine also handles curved and square pipe and tubes along with angular pieces. At 1,300 lb, and with motor speeds of 1,500 and 3,000 rpm, Turnamat provides thousands of hours of trouble-free, 24/7 operation. Read More

Machinery & Machining Tools, Cleaning Products & Equipment, Services

Deburring System handles high volume fineblanked parts.

March 5, 2014

Capable of annual throughput of >15 million parts, Tri-Ten deburring system can be bulk fed by operator/robot or fed directly by upstream press. Vision System stops machine if parts are improperly loaded, and 3 planetary head system removes burrs on parts from 3–0.40 mm thick. While three 254 mm flap discs on first head removes primary stamping burr, six 254 mm application-specific abrasive filament brushes on subsequent 2 heads eliminate secondary burrs and provide specified edge radius. Read More

Machinery & Machining Tools

Deburring/Chamfering Tools are designed for plastic pipes.

October 7, 2013

DEB1 tools deburr and chamfer PVC, CPVC, ABS, PE, and PP pipe up to 2 in. dia to manufacturers' standards within seconds, and solvent spreads evenly as chamfered pipe is joined. Options are available for iron pipe size (DEB1IPS), copper tube size (DEB1CTS), or metric up to 32 mm. Deburring tools, designed with internal pipe guides and knurled grip for slip-resistance, also feature blades that may be sharpened or replaced. Read More

Machinery & Machining Tools

Surface Finishing Products work on hard and soft materials.

April 23, 2013

Made of non-woven nylon impregnated with abrasive grain and smear-free resin, Norton Rapid Prep surface conditioning discs are suited for surface finishing applications across industries from aerospace and transportation to energy and metal fabrication. For use with right-angle grinders, in-line grinders, and die grinders, products have open structure that resists loading on softer materials while providing optimal surface finishing on hard materials. Read More

Portable Tools, Machinery & Machining Tools, Cleaning Products & Equipment

Abrasive Brushes support high feed rates, short dwell times.

April 1, 2013

Burr-Rx™ products include power tube brushes, small-diameter wheels, Bore-Rx™ internal deburring tools, mini-disc brushes, and banded end brushes in addition to large-diameter wheel brushes and shell-mill-holder disc brushes. Black nylon filaments are co-extruded with engineered ceramic abrasive grain, and brushes are suited for deburring inconel, stainless steel, and titanium. Assortment of filament configurations and fill densities enables use on any material. Read More

Machinery & Machining Tools

Deburring System utilizes 2 planetary heads.

February 1, 2013

At one end of Tri-Ten U-Series system, parts are placed on magnetic conveyor that carries them through first offset planetary deburring head where three 10 in. fiber abrasive disc brushes deburr upward facing surface. Parts then pass through second planetary head before being captured by turn-over conveyor that flips parts. After both sides are deburred, they are demagnetized, and pass under rinse and air knife. System is also equipped with mist collection system and coolant filtration system. Read More

Machinery & Machining Tools

Profile End Preparation System has compact, portable design.

November 27, 2012

Measuring 24 x 24 x 48 in., PEP system produces consistently uniform results. It completely removes burrs from aluminum extrusion profiles, regardless of work piece geometry, and lateral surface finish is not affected. Operator clamps sample part in place and manually feeds part across face of 8 in. abrasive filament brush. When part carrier makes contact with limit switch, included 2 hp, 1,750 rpm electric motor reverses direction for return feed against brush. Read More

Machinery & Machining Tools

Synthetic Media Formulations produce optimal finishes.

August 17, 2012

White/cream in color, 55 lb/ft³ SM is formulated to run clean and works in die cast operations. Product will leave bright, polished finish when used with proper compound. Tan in color, 55 lb/ft³, SY-1 general-purpose deburring media leaves finish capable of being plated or polished. This product is capable of replacing general-purpose plastic media applications. Read More

Machinery & Machining Tools, Materials & Material Processing

Wet Grit Blast Cleaning Solution meets aviation MRO needs.

September 10, 2009

Enabling replacement of dry grit with wet grit blasting to reduce or eliminate parent material removal, Wet Tech Process helps meet and exceed SPOP for wet grit blasting of major rotating parts. Aqueous wet and water blast cleaning equipment and machinery suit advanced applications for OEM parts cleaning. In addition to automatic pushbutton method for determining media concentration, features include stainless steel tig welded construction and gun with controllable air pressure. Read More

Machinery & Machining Tools

Blast Wheels help reduce cleaning cycle times.

July 2, 2009

Available with unit bearing for belt-driven applications, EZEFIT® wheel contains all features and benefits of direct-drive wheel. It eliminates need for mounting base plate, reduces vibration and wheel assembly time, and offers fail-safe wheel component alignment. Mounting hardware allows for upgrades on most wheel blast machines - Wheelabrator® and non-Wheelabrator - that include Tumble Blast, Spinner Hanger, Monorail, Table, and Railcar Shot Blast systems. Read More

Machinery & Machining Tools

Deburring Machine features compact form factor.

September 6, 2007

Designed for general manufacturing cells and small or specialty manufacturers, single station Thermal Energy Method(TM) (TEM(TM)) S-250 machine can integrate into lean manufacturing environments. Depending upon component size, compact unit can process million parts or more per yr and can handle small batch or mass production runs with average end-to-end cycle times of 60 sec. It also features computer controls for fine-tuning of process parameters. Read More

  • 1