Deburring Machines

Robotics, Machinery & Machining Tools

High-Payload Robot conserves space while increasing capacity.

March 20, 2015

Designed to efficiently manipulate components of significant size and weight, SMART NJ 650 handles payloads up to 650 kg, offers maximum horizontal reach of 2.70 m, and provides ISO 9283 repeatability from 0.15 mm. Space-conserving design, characterized by stiffness, is suited for such industrial applications as handling, spot welding, and component manipulation as well as palletizing, deburring/polishing, packaging, and general machining. Read More

Machinery & Machining Tools

Deburring Tool cleans and chamfers pipe inside and out.

February 26, 2015

In one revolution, tools of DEB1 Series deburr and produce clean chamfer to manufacturers' standards. Model DEB1IPS-INT fits OD pipe on one end and ID with other, eliminating need to acquire two separate tools. Suitable for PVC, CPVC, PE, ABS, and PP, this 2-in-1 tool features replaceable blades, aluminum body that promotes longevity, and knurled grip for slip-resistance. Product fits ½, ¾, and 1 in. IPS pipe. Read More

Machinery & Machining Tools

Deburring Machine offers 5-second solution.

September 23, 2014

In 5 seconds or less, Turnamat thoroughly cleans burrs from end of steel, aluminum, and non-ferrous metal pipe or tube, ridding it of potential hazards to operational quality or handling safety. Machine also handles curved and square pipe and tubes along with angular pieces. At 1,300 lb, and with motor speeds of 1,500 and 3,000 rpm, Turnamat provides thousands of hours of trouble-free, 24/7 operation. Read More

Machinery & Machining Tools

Deburring System processes fineblanked parts.

March 18, 2014

Capable of being bulk fed or fed directly by upstream press, Tri-Ten System features 3 planetary head system that removes burrs on parts ranging from 3 mm to 0.40 mm thick. Three 254 mm flap discs on first head remove primary stamping burr, while six 254 mm, application-specific abrasive filament brushes on second and third heads eliminate secondary burrs and provide specified edge radius. To ensure part cleanliness and extend media life, coolant is liberally applied during deburring operation. Read More

Machinery & Machining Tools, Cleaning Products & Equipment, Services

Deburring System handles high volume fineblanked parts.

March 5, 2014

Capable of annual throughput of >15 million parts, Tri-Ten deburring system can be bulk fed by operator/robot or fed directly by upstream press. Vision System stops machine if parts are improperly loaded, and 3 planetary head system removes burrs on parts from 3–0.40 mm thick. While three 254 mm flap discs on first head removes primary stamping burr, six 254 mm application-specific abrasive filament brushes on subsequent 2 heads eliminate secondary burrs and provide specified edge radius. Read More

Machinery & Machining Tools

Deburring System utilizes 2 planetary heads.

February 1, 2013

At one end of Tri-Ten U-Series system, parts are placed on magnetic conveyor that carries them through first offset planetary deburring head where three 10 in. fiber abrasive disc brushes deburr upward facing surface. Parts then pass through second planetary head before being captured by turn-over conveyor that flips parts. After both sides are deburred, they are demagnetized, and pass under rinse and air knife. System is also equipped with mist collection system and coolant filtration system. Read More

Machinery & Machining Tools

Profile End Preparation System has compact, portable design.

November 27, 2012

Measuring 24 x 24 x 48 in., PEP system produces consistently uniform results. It completely removes burrs from aluminum extrusion profiles, regardless of work piece geometry, and lateral surface finish is not affected. Operator clamps sample part in place and manually feeds part across face of 8 in. abrasive filament brush. When part carrier makes contact with limit switch, included 2 hp, 1,750 rpm electric motor reverses direction for return feed against brush. Read More

Machinery & Machining Tools

Deburring System features machine-compatible design.

March 19, 2012

Customized for application-specific abrasive filament brushes, Tri-Ten Series accepts precision ground parts, in carriers, directly from grinding, lapping, or honing machine. As magnetized belt grips parts in carrier, they are presented to planetary head, where three 10 in. abrasive filament brushes deburr upward facing surface. Edge break, surface finish, and material removal are accurately controlled. Brushes may be specified with silicon carbide, aluminum oxide, ceramic, or diamond filaments. Read More

Machinery & Machining Tools

Electropolishing Systems can be tailored to user requirements.

May 5, 2011

Featuring single point graphical machine operation and monitoring of process parameters from touch screen, Technic Electropolishing Systems provide precise and repeatable electropolishing, sharpening, and deburring. Machines can be custom engineered with robotic parts feeding technologies, fixtures, tanks, tooling, and controls to meet user requirements. Suitable for stainless steels, Monel®, Hastelloy®, titanium, and related metals, systems can process parts from millimeters up to 20 in. sq. Read More

Machinery & Machining Tools, Materials & Material Processing

Pressure Washing and Deburring Machines handle simple and complex parts.

March 30, 2011

Comprised of 5 modular and fully programmable machines, JET CLEAN CENTER line is designed for precision washing and deburring of simple and complex parts. Products include CLEANRISER automated Millipore patch reading system as well as JCC drying equipment that uses plant or regenerative air or vacuum technology. Depending on machine, common base, stainless steel enclosure, and internal 3-axis module is used to streamline use of part handling automation. Read More

Machinery & Machining Tools

Portable Welding End Prep Tool features optimized ID clamping.

March 17, 2011

Suited for end prepping single water wall boiler panel tubes, air-powered Ground MILLHOG® requires 1 ½ in. radial clearance and features clamp rib assembly that incorporates captive internal band and smooth clamp ribs. Design facilitates removal of ID clamping tool from tube; it will not catch on burrs and is unaffected by repetitive cycling. Totally sealed for use in any orientation, right-angle drive scarfing tool can prep high-chrome content alloyed tubes from ½ ID to 2 ¼ in. OD. Read More

Machinery & Machining Tools

Wire Cutting/Deburring Machine is fully automated.

November 24, 2010

Fully programmable with recipe storage, Automated Cut and Deburr (ACD-5M) cuts and deburrs Nitinol and stainless steel wire from 0.2-1 mm dia and 35.5 cm to 5 m long. It turns spooled or rough cut wire into stacks of cut-to-length and deburred guidewire blanks ready for centerless grinding. Utilizing CBN grinding media, machine features color touchscreen, cleanable filters that capture fine grinding particulate, and hinged, interlocked, clear guarding. Read More

Machinery & Machining Tools

Round-Bowl Finishing Machine suits small-volume applications.

January 26, 2010

Targeted at job shops and metalworking departments, VM-1 VibeMaster has ½ cu-ft capacity for de-burring and finishing of small metal parts. It comes with or without pedestal, and has solid urethane bowl that can be removed from pedestal for emptying contents and occasional cleaning. Features include 45° angled spout for strength, and molded lip on tub to prevent escape of finishing media. Available options include flow-thru compound system and manual 5-piece screen set with container. Read More

Machinery & Machining Tools, Materials & Material Processing

Wet Grit Blast Cleaning Solution meets aviation MRO needs.

September 10, 2009

Enabling replacement of dry grit with wet grit blasting to reduce or eliminate parent material removal, Wet Tech Process helps meet and exceed SPOP for wet grit blasting of major rotating parts. Aqueous wet and water blast cleaning equipment and machinery suit advanced applications for OEM parts cleaning. In addition to automatic pushbutton method for determining media concentration, features include stainless steel tig welded construction and gun with controllable air pressure. Read More

Machinery & Machining Tools, Green & Clean

Wet Blast System operates without dust or strong chemicals.

April 13, 2009

Promoting sustainability and ecologically sound practices in manufacturing environments, ABS III can perform cleaning, deburring, and finishing capabilities in one step without any impact on environment. Design, which incorporates fluorescent lighting, non-corrosive cabinet, swing door, 20 in. dia turntable, and 2 hp slurry pump, promotes visibility. Functionality is promoted via abrasion-resistant pump, 6.5 gal slurry hopper, and process gun with 3/8 in. nozzle. Read More

Machinery & Machining Tools, Green & Clean

Wet Blast System combines ecology, economy, effeciency.

April 13, 2009

Used for cleaning, finishing, descaling, and deburring, SS-10 uses scrubbing action that cleans and deburrs via solution of media, water, and compressed air. No chemicals or solvents are used, promoting worker and environmental safety. Manual system has 60 x 70 x 96 in. fiberglass cabinet with 50 x 50 in. door opening, and load end provides 68 X 65 in. area for parking 49 in. trolley-mounted turntable. Other components include media collector and slurry delivery system. Read More

Machinery & Machining Tools

Deburring Machine uses vibratory action.

April 13, 2009

Bench-top Supernova 2000 has 24 in. square metal stand base featuring reinforced stainless steel top plate with 12 standard springs, self-leveling feet, and 0-60 min timer. Unit stands 26 in. high and has 24 in. OD bowl that measures 12 in. tall with 8 in. channel width. Bowl also has built-in ramp and discharge chute secured with 4 heavy duty fasteners, 2 of which also serve as ½ in. drain systems. Clear plastic cover lid has provisions for vacuum hose connection. Read More

Machinery & Machining Tools

Deburring System features return-to-operator configuration.

March 4, 2009

Suited for applications requiring small footprint and portability, Tri-Ten series planetary head deburring system is designed to deburr both sides of part in single pass. Magnetic conveyor passes parts loaded at one end of system through offset planetary deburring head, where three fiber abrasive brushes deburr upward facing surface, after which part is carried to flipping mechanism and transported back through planetary head for deburring. Read More

Machinery & Machining Tools

Deburring Station minimizes potentially flammability.

January 15, 2009

Wet Deburring Station uses wet filtration system to capture potentially combustible filings and dust in air/water mixing zone. By entrapping these particles in water, possible flammability is reduced. After pulling filings and dust through air/water mixing zone, material is disposed of as slurry. Model 64100 (21 x 20 x 36 in.) and Model 64100 (36 x 31 x 45 in.) feature tabletop design and can be placed either on countertop or cart. Read More

Material Handling & Storage, Machinery & Machining Tools

Centrifugal Disk Finisher eliminates hand deburring.

January 13, 2009

With small opening between spinning and stationery components at base of machine, Model ACDF-75 keeps tiny parts from disappearing during finishing process. Urethane-lined bowl does not require frequent relining, which saves equipment downtime. PLC-equipped for precision deburring, machine offers variable speed and is available in 4 sizes to accommodate varying part dimensions and batch quantities. Part/media separation screens are included to minimize operator involvement. Read More