Dynabrade, Inc.
Clarence, NY 14031
Mar 17, 2008 Featuring ergonomic, pencil-type shaft for operator comfort and control, air-powered, 100,000 rpm Pencil Grinder is turbine-driven with rear-exhaust and no wearable gears, vanes, or blades. Tool speed is adjustable with twist of on/off switch. Available with 1/8, 3/32, 1/16, and 3 mm collets, grinder includes stainless steel tool housing, ceramic bearings, and tactile cues on shaft end that alert operator to rotating area.

Extrude Hone Corp.
Irwin, PA 15642
Feb 19, 2008 Suited for small to medium-sized workpieces that may be inherently delicate or intricate, CoolPulse 200(TM) electrolytic machine deburrs, polishes, stress relieves, and cleans in one finishing process. Machine can remove rough surfaces from 2.5-5 µm Ra and produce smooth surfaces down to 0.1 µm Ra, providing bright or mirror-like finish on stainless steel and bright to matte finish on aluminum. Electrolyte used in process consists of chilled, non-fuming, odorless, near-neutral solution.

Abtex Corp.
Dresden, NY 14441-0188
Nov 12, 2007 Wet Tri-Ten Series Series motors and electrical components are outside of process cabinet, isolating them from wet environment. System includes planetary head with 3 brushes, bathed in spray of coolant, that deburr top surface of parts. Also included is magnetized overhead conveyor, second planetary head with brushes bathed in coolant to deburr bottom of parts, and demagnetizer.

Dynabrade, Inc.
Clarence, NY 14031
Oct 04, 2007 Utilizing ½-2 in. wide x 30 in. long belts, air-powered Dynabelter Abrasive Tools are available in .7 hp Standard Duty, 1.2 hp Heavy-Duty, 2.0 hp Extra Heavy-Duty model with pressure bar and top control handle, and 1.2 hp Heavy-Duty model that includes Adjust-A-Wheel, which controls depth of abrasive belt cut. Adjust-A-Wheel allows for controlled grinding on flat surfaces without undercutting. Tools are suitable for weld grinding, blending, deburring, and finishing.

Almco, Inc.
Albert Lea, MN 56007 2751
Oct 01, 2007 Requiring 15 ft² of floor space, Model S2-30 finishes up to 480 parts per hour with uniformity, consistency, and process repeatability. Parts measuring up to 2½ x 3 in. can be loaded on one or both spindles, manually or with robots, and unloaded after typical 15 sec deburring cycle. Mounted on air-actuated collets or ID expanding collets at ends of rotating spindles, complex parts are pivoted into rotating tub with stream of abrasive slurry moving at speeds to 2,000 fpm.

Extrude Hone Corp.
Irwin, PA 15642
Sep 06, 2007 Designed for general manufacturing cells and small or specialty manufacturers, single station Thermal Energy Method(TM) (TEM(TM)) S-250 machine can integrate into lean manufacturing environments. Depending upon component size, compact unit can process million parts or more per yr and can handle small batch or mass production runs with average end-to-end cycle times of 60 sec. It also features computer controls for fine-tuning of process parameters.

Weiler Corporation
Cresco, PA 18326 0149
Jun 14, 2007 Engineered to unique requirements, Crimped Wire Wide Face Brushes are dynamically balanced and available in 4 fill densities. Types include hard drawn steel, high-tensile steel, and Type 302 stainless steel wire, with wire diameters from .006-.020 in. Sectional construction enables choice of face width up to 30 in., available in ½ in. increments. Applications include surface finishing of clad materials, conveyor and coil strip cleaning, leak detection, and steel roll coating removal.

Dynabrade, Inc.
Clarence, NY 14031
May 22, 2007 Equipped with 1 hp variable speed motor, Stationary Versatility Grinder utilizes ¼ x 2 in. wide x 72 in. long abrasive belt that can travel in either forward or reverse motion. Pivot mount assembly allows operator to adjust sanding belt to any angle for optimum comfort, while 4 in. diameter vacuum port enables connection of dust collection systems. Full range of contacts arms is available for grinding, deburring, and polishing applications.

Weiler Corporation
Cresco, PA 18326 0149
Mar 07, 2007 Ranging in size from ¾-4 in. with wire or abrasive nylon filament, Bore-Rx(TM) Brushes remove all burrs found at intersecting holes and other internal edges of workpiece, and can also be used for bore finishing applications. Unlike tube brushes, Bore-Rx brushes rotate in both directions and can operate at high speeds. They can be adapted for use in end mill holders or can be mounted using 3/8 in. collets.

TRUMPF Power Tools
Farmington, CT 06032
Feb 28, 2007 Working with punching machine, roller deburring tool and 3-way deburring MultiTool negate need for separate manual deburring stage and displace any burr by chamfering sharp edges (~0.004 in.) on underside of part. Roller deburring tool uses specially formed embossing roll for long edges and contours with radius of 0.8+ in., while deburring MultiTool handles smaller radii, intricate geometries, and corners in single stroke or in nibble mode.

Dynabrade, Inc.
Clarence, NY 14031
Feb 01, 2007 Wet Deburring Station helps reduce potential flammability of materials in workplace while grinding. Using wet filtration system, system captures and entraps potentially combustible filings and dust in air/water mixing zone. Hose drain port allows slurry material to be drained with connection of standard garden hose. Weighing 100 lb, 21 x 20 x 36 in. station can be placed on countertop or in cart for station-to-station portability.

Automation Systems Interconnect Inc.
Mechanicsburg, PA 17055
Jan 29, 2007 Made of hardened steel, ASI DIN rail cutter has 4 separate cutting slots for handling popular DIN rail types. Its 1 m gauge with end stop ensures accurate cut lengths from start to finish. In addition to lever action that minimizes required operator force, cutter features bench-top design for location placement flexibility. Burrs and sharp edges are eliminated due to clean cut die design, which also eliminates need for secondary filing or grinding.

Abtex Corp.
Dresden, NY 14441-0188
Jan 05, 2007 Employing three 10 in. brushes per head, Tri-Ten Series is capable of deburring both sides of flat part in one pass, without flipping it, via use of dual magnetic conveyors. Third conveyor passes parts into degausser for demagnetization. Base system design can be expanded to include application-specific auxiliary equipment. For non-ferrous parts, systems can be designed using alternate part fixturing methods.

Almco, Inc.
Albert Lea, MN 56007 2751
Sep 18, 2006 Model SBB-12 spiral bottom round bowl unit includes full-circle baffle that keeps parts constantly in media mass. Spiral design of up-hill tub bottom enables automatic separation of parts from abrasive media at pre-determined intervals, and allows different parts to move over separating dam to screening area without jamming or hitting. Device features 12 cu ft urethane-lined tub, 7.5 hp drive, 13 in. dia tub cross section, with 66 in. overall diameter and 44 in. height.

Weiler Corporation
Cresco, PA 18326 0149
Sep 15, 2006 Made of Egyptian cotton and premium aluminum oxide grain, Tiger® Flap Wheels are suited for medium to high production environments. Vortec(TM) Flap Wheels have cotton backing and standard aluminum oxide grain for low to medium production environments. Applications include cleaning, edge blending, deburring, and mismatch removal on machined parts; smoothing metal, plastic, and wood; and final finishing of metal surfaces prior to painting and plating.

ATI Industrial Automation
Apex, NC 27639
Sep 13, 2006 Mounted to robot or CNC machine, Flexfinish(TM) axially-compliant finishing tool features floating motor and spindle arrangement, vane-type air motor, and remotely-adjustable air pressure. Rotating spindle is equipped with 3/8 in. chuck to hold variety of finishing devices. Weighing 7.25 lb and requiring 390 W power, motor maintains working spindle speed of 2,600 rpm and compliance force is 3.2-16.7 lb at 5-60 psi air supply pressure.

SPV SPINTEC AB
Eskilstuna S-631 04  Sweden
Aug 21, 2006 Suitable for incorporation into robot cells, bench-top Model 68 2006 deburs gear wheels and contoured profiles on round and oval workpieces such as rings, hubs, and discs. It can be supplied with several spindles running at 2 different speeds. Cutting pressure is adjustable from 10-300 g, and initial tool contact is dampened via adjustable shock absorber. Pivoting suspension device on spindle provides free movement vertically when working to ensure equal machining.

Rex-Cut Products, Inc.
Fall River, MA 02720
Jul 19, 2006 Providing 7 shapes of cotton-fiber mounted points, MX Plus Kit can be used on stainless steel, aluminum, and exotic metals. It is suited for blending and finishing coarse scratches left by carbide burrs and other aggressive products. Featuring heavy grain content of aluminum oxide abrasives and choice of coarse, medium, and fine grits in latex bond, mounted points are on ¼ in. spindle in 1-A3, 1-A5, 1-A12, 1-A25, 1-B52, 1-W177, and 1-W220 shapes.

Bertsche Engineering Corp.
Buffalo Grove, IL 60089 6902
Jun 22, 2006 Able to handle parts up to 300 x 300 x 200 mm, multi-station iJet CNC High Pressure System completely washes, removes chip burrs, rinses clean, and dries 6 faces of parts. Four axis part handler transports part over series of single point horizontal and vertical rotary lance nozzles for single feature deburring and to manifold stations for multiple feature deburring and cleaning. System is available with 30, 50, or 75 hp pump system with water pressures up to 5,000 psi.

OTEC Precision Finish, Inc.
Acton, MA 01720
Mar 30, 2006 Using low abrasive media such as sintered ceramic chips, CF-oil system meets demands for smooth surfaces of workpieces subject to mechanical stress in miniaturized assemblies. It is aggressive enough to remove micro-burrs on work pieces without compromising dimensional integrity achieved through final grinding/honing and requires no water connection. Centrifugal disc finishing machine utilizes PLC automated process and eliminates possibility of corrosion.