Abtex Corp.    Dresden, NY 14441-0188
Mar 19, 2012 Customized for application-specific abrasive filament brushes, Tri-Ten Series accepts precision ground parts, in carriers, directly from grinding, lapping, or honing machine. As magnetized belt grips parts in carrier, they are presented to planetary head, where three 10 in. abrasive filament brushes deburr upward facing surface. Edge break, surface finish, and material removal are accurately controlled. Brushes may be specified with silicon carbide, aluminum oxide, ceramic, or diamond filaments.

Dynabrade, Inc.    Clarence, NY 14031
Sep 22, 2011 Operating at 14,000 strokes/min, DynaPen Series features one-touch on/off button and 6 ft air line that swivels 360° for maneuverability, especially useful when working on contoured parts. In-line filter prevents debris from entering tool from air line. Available with 1/8 in. or 3 mm collet insert, DynaPen Series is suited for use on plastics, composites, steel, aluminum, and other materials found in aerospace, mold making, firearm, and machine shop environments.

Weiler Corporation    Cresco, PA 18326 0149
May 23, 2011 Designed to address almost any automated deburring need, Burr-Rx(TM) Brushes feature black nylon filaments that are co-extruded with engineered ceramic abrasive grain. Extreme aggression of brushes minimizes cycle times by allowing use of high feed rates and short dwell times. Burr-Rx(TM) Brushes are suited for deburring tough materials such as Inconel, stainless steel, and titanium.

Rex-Cut Products, Inc.    Fall River, MA 02720
May 16, 2011 Made of cotton fiber impregnated with abrasives, Smooth Touch(TM) Deburring, Blending, and Finishing Wheels run smoothly and will not change geometry of pipe threads. Wheels are available in 2, 3, 4, and 6 in. diameters measuring 1/8, ¼, or ½ in. thick with coarse, medium, or fine grits. They are suited for cleaning oil field pipe threads made of stainless steel, Inconel, and other super-hard alloys, as well as iron and aluminum.

Technic, Inc.    Cranston, RI 02910
May 05, 2011 Featuring single point graphical machine operation and monitoring of process parameters from touch screen, Technic Electropolishing Systems provide precise and repeatable electropolishing, sharpening, and deburring. Machines can be custom engineered with robotic parts feeding technologies, fixtures, tanks, tooling, and controls to meet user requirements. Suitable for stainless steels, Monel®, Hastelloy®, titanium, and related metals, systems can process parts from millimeters up to 20 in. sq.

Wilson Tool International Inc.    White Bear Lake, MN 55110
Apr 19, 2011 Available for Trumpf® or thick turret style punch presses, Wilson De-burring Tool coins small chamfer on cut edge to accurately deburr straight lines or arcs, including acute angles and very small radii. Ball assembly design minimizes setup and adjustment time by enabling operators to adjust ball pressure without disassembling tool. Ball assemblies also extend tool life when working with wide variety of sheet materials.

Sugino Corp.    Itasca, IL 60143
Mar 30, 2011 Comprised of 5 modular and fully programmable machines, JET CLEAN CENTER line is designed for precision washing and deburring of simple and complex parts. Products include CLEANRISER automated Millipore patch reading system as well as JCC drying equipment that uses plant or regenerative air or vacuum technology. Depending on machine, common base, stainless steel enclosure, and internal 3-axis module is used to streamline use of part handling automation.

Parker Hannifin Corp., IPD Instrumentation Group    Huntsville, AL 35805
Mar 22, 2011 Suited for CPI(TM) and A-LOK® tube fittings, hand-operated tools include tube benders with indexing handle for ¼, 3/8, and ½ in. tubing sizes and calibration markings for left-hand, right-hand, and offset bends. Tube cutter for 1/8 and 1 1/8 in. stainless steel, steel, soft, copper, and aluminum tubing is also included, along with deburring tool for 3/16-1½ in. OD tubing. Inspection gauge and sawing vice, with hacksaw guide accommodating 3/16-2 in. OD tube, pipe, and hose, are also integrated.

Esco Tool    Medfield, MA 02052
Mar 17, 2011 Suited for end prepping single water wall boiler panel tubes, air-powered Ground MILLHOG® requires 1 ½ in. radial clearance and features clamp rib assembly that incorporates captive internal band and smooth clamp ribs. Design facilitates removal of ID clamping tool from tube; it will not catch on burrs and is unaffected by repetitive cycling. Totally sealed for use in any orientation, right-angle drive scarfing tool can prep high-chrome content alloyed tubes from ½ ID to 2 ¼ in. OD.

Brush Research Manufacturing Co., Inc.    Los Angeles, CA 90022
Jan 13, 2011 Specialty Flex-Hones blend and radius sharp edges as well as remove microburrs on chamfered holes, eliminating stress risers caused by chamfering. Tools polish and radius outer corners as well as inner corners and hole. Flexibility also lets tool pass through thin web sections and polish chamfer on back side. In eliminating hand finishing operations, tools produce consistent finishes from hole to hole and part to part. Various grit sizes and abrasive types are available.

Rex-Cut Products, Inc.    Fall River, MA 02720
Jan 11, 2011 Rex-Cut® Smooth Touch(TM) deburing, blending, and finishing wheels are made of cotton fiber impregnated with abrasives and have bond that provides one density suitable for applications of conventional 2-9 density unitized wheels. Flexible and conformable for use on contoured and flat surfaces and to reach into corners, they offer smooth control and come in standard coarse, medium, and fine grits in 2, 3, 4, and 6 in. dia., 1/8, 1/4, and 1/2 in. thick sizes.

Mate Precision Tooling    Anoka, MN 55303
Dec 22, 2010 Designed to deburr mild steel, stainless steel, and aluminum sheet material in any thickness, Rollerball Deburr(TM) Tool performs burr removal automatically as part of punching process. No off-line manual burr removal is needed. Available for thick turret or Trumpf Style press applications, tool uses special ball in both upper and lower parts to push burr away, creating slight radius on punched edge. All part contours can be processed, including small, tight corners.

ASG Medical Systems    West Palm Beach, FL 33404
Nov 24, 2010 Fully programmable with recipe storage, Automated Cut and Deburr (ACD-5M) cuts and deburrs Nitinol and stainless steel wire from 0.2-1 mm dia and 35.5 cm to 5 m long. It turns spooled or rough cut wire into stacks of cut-to-length and deburred guidewire blanks ready for centerless grinding. Utilizing CBN grinding media, machine features color touchscreen, cleanable filters that capture fine grinding particulate, and hinged, interlocked, clear guarding.

Rex-Cut Products, Inc.    Fall River, MA 02720
Aug 03, 2010 Made from non-woven synthetic that is compressed, bonded, and impregnated with abrasives, Mebabrite(TM) mounted points are designed for light deburring, blending, and polishing. They feature medium/fine grits and soft/hard densities for smooth, chatter-free operation on precision machined and cast parts without changing their geometry. Points are available in over 150 industry standard A, B, and W shapes with 1/8 and ¼ in. shanks, in aluminum oxide and silicon carbide abrasives.

Weiler Corporation    Cresco, PA 18326 0149
Apr 26, 2010 Suited for nuclear power industry where Foreign Material Exclusion programs may limit or exclude use of wire brushes in some areas during routine maintenance or repairs, Nylox® Ceramic Filament Brushes can be used for many deburring, cleaning, and surface preparation applications. Ceramic grain enables use on materials such as Inconel, stainless steel, and titanium. Models are available for Weiler/Metabo right angle grinders and Weiler/Metabo die grinders.

Maxitec Pty Ltd    New South Wales 2229  Australia
Apr 21, 2010 Mate Rollerball Deburr(TM) tool, available in thick turret and Trumpf Style versions, allows operators to perform punching/deburring of materials in one step. System utilizes Rollerball(TM) technology that uses programming capabilities of presses that operate in X and Y axes with ram down. Ball in both upper/lower sections of tool allows every part contour to be processed. Three springs that allow users to adjust tension appropriate to material being punched are also included.

Almco, Inc.    Albert Lea, MN 56007 2751
Jan 26, 2010 Targeted at job shops and metalworking departments, VM-1 VibeMaster has ½ cu-ft capacity for de-burring and finishing of small metal parts. It comes with or without pedestal, and has solid urethane bowl that can be removed from pedestal for emptying contents and occasional cleaning. Features include 45° angled spout for strength, and molded lip on tub to prevent escape of finishing media. Available options include flow-thru compound system and manual 5-piece screen set with container.

Brush Research Manufacturing Co., Inc.    Los Angeles, CA 90022
Sep 25, 2009 Engineered using resin bond diamond crystals with high friability, Diamond Flex-Hone® Tools are suited for deburring, edge blending, and surface finishing in hard materials such as carbide, ceramic, or aerospace steel alloys. Premium coated abrasive aids in heat dissipation and optimizes bond retention. Tools are available in 4-20 mm diameters and 3 different mesh sizes.

Wet Technologies    Holbrook, NY 11741
Sep 10, 2009 Enabling replacement of dry grit with wet grit blasting to reduce or eliminate parent material removal, Wet Tech Process helps meet and exceed SPOP for wet grit blasting of major rotating parts. Aqueous wet and water blast cleaning equipment and machinery suit advanced applications for OEM parts cleaning. In addition to automatic pushbutton method for determining media concentration, features include stainless steel tig welded construction and gun with controllable air pressure.

Wheelabrator Group    Burlington, ON L7L5V5  Canada
Jul 02, 2009 Available with unit bearing for belt-driven applications, EZEFIT® wheel contains all features and benefits of direct-drive wheel. It eliminates need for mounting base plate, reduces vibration and wheel assembly time, and offers fail-safe wheel component alignment. Mounting hardware allows for upgrades on most wheel blast machines - Wheelabrator® and non-Wheelabrator - that include Tumble Blast, Spinner Hanger, Monorail, Table, and Railcar Shot Blast systems.