Mitee-Bite Products Inc.
Center Ossipee, NH 03814
Oct 31, 2005 Combining security of screw clamp and speed of cam action clamp into single clamping device, Mitee-Bite fixture clamp is made of eccentric socket head cap screw and hexagonal brass clamping element. Cam action requires quarter turn to tighten or loosen, and low profile design allows more parts per fixture. Clamp is available in thread sizes from 8-32 to 5/8-11 as well as metrics.

Techno Sommer Automatic
New Hyde Park, NY 11040
Sep 23, 2005 Designed for loading and unloading machine tools, multiple grippers, and transfer lines, Models SW50D4, SW74D4, SW100D4, SW155D4, and SW195D4 have pivoting transfer plate that rotates 180° under 8 bar pneumatic pressure. Built-in air manifolds provide tangle-free transmission of air to attachments, and through hole can be used to carry wiring, hoses, or rods through center. Max cycle time is adjustable to 171/min, and torque ratings range from 1.5-120 Nm @ 6 bar.

Techno Sommer Automatic
New Hyde Park, NY 11040
Sep 23, 2005 Offering adjustable stroke and gripping force up to 2,700 N, GG Series Grippers are sealed against dust, dirt, and coolant, allowing use in machining and grinding environments and wet or dirty applications. Units feature up to 35° stroke per jaw to allow clearance for tooling fingers. Opening angle is adjustable via screw on top of gripper. NC models are available with spring failsafe device to keep jaws closed in event of pressure loss.

Mate Precision Tooling
Anoka, MN 55303
May 04, 2005 Designed for Trumpf presses, QuickLockâ„¢ features keyed alignment ring that engages alignment key in punch to facilitate tool alignment. Performed by hand, tool components snap together without resorting to off-line alignment tool setup fixtures. Tool system consists of punches, strippers, and dies, available with max die opening of 1.181 + 0.078 in. or 3.000 + 0.078 in. Both sizes use same alignment ring. Tooling is offered in 11 standard shapes.

Schneeberger, Inc.
Bedford, MA 01730
Dec 20, 2004 Made from stainless steel, MINIRAIL 2-row, miniature guideways utilize ball-retainer design and interchangeable carriage with wipers on each end. They are capable of speeds of 5 m/s and accelerations of 300 m/s². Standard models MN 7, MN 9, MN 12, and MN 15 have respective max lengths of 760, 935, 945, and 950 mm. Wide model MN 14 has max length of 740 mm, while wide models MN 18, MN 24, and MN 42 have max length of 950 mm.

Stafford Mfg. Corp.
Wilmington, MA 01887
Apr 29, 2004 Stafford Rail Clamps function as positive mechanical end stop or mounting block on rail-mounted shafts. Clamp-style devices slide over end of both shaft and support rail and separate to permit assembly anywhere on shaft. Machined from steel with black oxide finish, products are offered in 6 sizes from ½â€“1½ in. bore and adjust using hex wrench. They can include drilled and tapped holes for mounting components and can be made from stainless steel.

Koma Precision, Inc.
East Windsor, CT 06088
Sep 02, 2003 HSK equipped right angle heads and universal heads can be equipped with input or output spindle. Outputs are available in HSK 32, 40, 50, and 63 sizes, while inputs are offered in HSK 50, 63, 80, and 100 sizes. Flange face fits face of machine spindle for rigidity, stability, accuracy, and repeatability. Design receives clamping force from axial and radial forces generated in tool shank. Products are suited for aerospace and automotive applications.

Production Basics, Inc.
Watertown, MA 02472
Mar 12, 2003 Accessory Tower mounts to flat, horizontal area such as laminate or wood work surface. It is made of 12 ga steel and extends 48 in. above surface. Perpendicular horizontal channel is 24 in. long and supports up to 2 suspended tools. Tower Parts Bin Panel and Tool Balancer can be attached for easy access and usage of tools and hardware. Tower makes use of vertical space to help production employees increase productivity.

Command Tooling Systems
Ramsey, MN 55303
Jun 24, 2002 New Axisâ„¢ Fluid-Driven Right Angle Head features elliptical head for machining within cavities down to 1 in. dia. It clamps rigidly in machine spindle. Speed is based on coolant flow, and torque is based on coolant pressure. Light-duty applications require 200 psi, and heavier-duty applications may need 1000 psi or more. With solid design from shank to tool spindle, axis head loads from automatic tool changer.

Reid Supply Co.
Muskegon, MI 49444
Jun 21, 2002 Kits include Wilton inspection packs, precision toolmakers vise and parallel kits, precision square kits, and toolmakers vise kits.

Indexing Technologies Inc.
Ramsey, NJ 07446 0252
Jun 18, 2002 Sauter Crown-Type Tool Turrets use single motors for turret indexing and live tool drive. Most sizes are available with 4, 6, or 8 tool positions and various tool spindles. Multi-spindle and special tooling are also available. Turrets have universal housings that mount in any orientation and tool speeds rated to 15,000 rpm. Features include bi-directional indexing, non-lifting tool carriers, and integral high-pressure coolant distribution system.

Centerline Centroid, Inc.
McHenry, IL 60050
Jun 07, 2002 Model RAD-120 right-angle milling, drilling, and tapping head is manufactured with fabricated body. Tool is intended to be changed automatically into spindles of machining centers. Unit housing the bevel gears has two chamfered outer corners, which reduces risk of interference with component or other tooling in machining area. Head has 40 taper, collet chuck for tool shanks up to 0.4 in. dia, and speed of 6,000 rpm (max).

Textiles Coated Inc.
Amherst, NH 03031
Jun 04, 2002 Available in round and rectangular shapes in open-ended or closed form, LFPâ„¢ Bellows and Way Covers are made with flexible, multilayered PTFE material. Heat-sealed covers have no stitching, maintain zero-porosity even after severe flexing, resist chemical attack and ultraviolet exposure, and are rated for 500°F. Covers can incorporate numerous types of end attachments, and are available in thicknesses ranging from 5 to 60 mils.

Sisson Engineering Corp.
Northfield, MA 01360
Apr 22, 2002 Tool Length Offset Block eliminates lengthy tool setups, and chipped or broken tools. It allows user to touch off any type of tool in about 30 sec. All tools will be within .0001 in. of each other, eliminating question of which tool to adjust on first piece from setup.

RazorGage Technical Services, Inc.
Ames, IA 50010 9629
Apr 08, 2002 RazorGage" stop table positions or feeds linear parts for sawing, punching, and drilling. It consists of motorized screw-driven stop assembly mounted to machine-tool grade linear bearing flanked by linear encoder. Components are enclosed in extruded-aluminum table with integrated fence. NEMA 4/12 enclosure houses programmable controller with expandable I/O that interface with solenoid valves, motor starters, and sensors. Color touchscreen runs Windows CE.

Accurate Tool & Die
Burien, WA 98166
Feb 27, 2002 Way Covers are semi-transparent and heat resistant. They are mounted outside table, so there is no loss of travel. Measuring 18 in. wide, 3 ft long in back, and 2 ft long in front, they include self-retracting rollers and built-in wiper. Covers are oil and solvent resistant, and have 5 mil thick film that is resistant to temperatures over 750 deg F.

Jergens, Inc.
Cleveland, OH 44110
Jan 03, 2002 Ball Lockâ„¢ fixture kits contain all components needed to locate and lock fixture plates to subplates. System provides quick change capability, and holds plates together with working loads up to 20,000 lbs. Standard kit includes correctly-sized subplate and fixture plate, both pre-drilled with ball lock bushings installed and correct number of shanks, T-slot nuts, sine fixture keys, and socket head cap screws. Repeatability is ±0.0005 in.

Kistler Instrument Corp.
Amherst, NY 14228 2119
Dec 07, 2001 Model 8770A Impedance Head yields simultaneous dynamic acceleration and force data from identical acquisition points. Types 8770A5 and 8770A50 provide acceleration and force ranges to +5g and +51bf or ±50g and +501bf respectively. Outputs are phase matched to within 2° with acceleration and force sensitivities unaffected by mounting or torque. Quartz and ceramic piezoelectric sensing elements yield acceleration frequency responses of 1 Hz to 4kHz.

Stafford Mfg. Corp.
Woburn, MA 01888 0670
Nov 27, 2001 Cushioned End Stops are neoprene spacers that match ID/OD dimensions of shaft collars to reduce problems caused by metal-to-metal contact in linear stroke applications. PTFE version provides low coefficient of friction in rotary applications, and help prevent galling from stainless steel contacting stainless steel. End stops come in sizes from 1/2 ID x 1-1/8 in. OD up to 2 ID x 3 in. OD. Neoprene end stops are 1/8 in. thick; PTFE is 1/16 in.