Schunk
Morrisville, NC 27560
May 05, 2009 UNILOCK NSA series provides rapid change over between setups with less than 0.0002 in. repeatability. Workpieces are positioned in place within seconds, ensuring absolutely secure clamping during machining. Fully sealed against contamination, series takes up minimal machine space while simplifying workpiece changing and providing reliable, clean, and chip-free support surface. Forced airflow removes chips and contamination from short tapers during automated pallet changing.

Ingersoll Rand Recognition Systems
Campbell, CA 95008
Apr 06, 2009 Available in pistol or inline configurations for M3-M8 bolts, Qi Series Air Impact Screwdrivers are suited for non-critical, high cycle rate industrial applications. Reactionless impact tools are lightweight, compact, and can handle tough high volume applications.

Hilti Inc.
Tulsa, OK 74121
Mar 27, 2009 Designed to work with range of collated fasteners, Hilti SDT 30 Stand-up Decking Tool allows operators to work upright at all times, and can load up to 50 collated fasteners at one time. SDT 30 gives operators flexibility to complete both sidelap and thin bar joist applications with just one tool. It accepts ST 1800 Metal Screwdriver with adjustable torque clutch, allowing operators to set fasteners correctly.

Pemco Inc.
Sheboygan, WI 53082
Mar 26, 2009 Providing optimal decurler capability, T.I.P. WEB-0401 features heavy duty 3-bar motorized roller decurler assembly. Available in 12, 20, 30, 40, 50, and 75 mm dia, diameter of 3 decurler bars depend on machine/product details. Decurler needed for converting dedicated product can be selected by moving pin and rotating assembly using supplied handle and then reinserting pin to lock it. With remote adjustment, unit has less or no product markings.

Schleuniger, Inc.
Manchester, NH 03103
Mar 18, 2009 Built from modular components, TransferModule 6000 includes cable transport system, transfer shuttles, transfer chain, cable loading/unloading stations, control system, and PC-based user interface. Stations can perform stripping, tinning, sealing, shield flaring, and micro-flame soldering, as well as ultrasonic and resistance welding, connector housing insertion, and electrical testing. Typical applications include coaxial, flat, and round multi-conductor and zipcord cable assemblies.

Sonobond Ultrasonics
West Chester, PA 19380
Mar 11, 2009 Able to accommodate tinned or heavily oxidized wires, Dual Head SpliceRite(TM) welds wire bundles that have cross-sectional areas of up to 100 mm². It comes with 3,500 W power supply and utilizes Wedge-Reed system, which directs high frequency ultrasonic energy via welding tips to wires to be welded. Welding heads on each side of weld area enables accelerated splicing of large wire bundles. Up to 250 jobs can be stored/recalled, and welds may be controlled by height, energy, or time.

Manncorp
Willow Grove, PA 19090
Mar 10, 2009 Providing source for equipment, frames, masks, and accessories, 03.1 Reballing/Prebumping Station offers in-house solution for contractors and OEMs. It uses Rapid IR Heating Technology for energy-efficient lead-free processing temperatures while preventing component/board damage. Also able to convert BGAs, CSPs, and QFNs from leaded to lead-free devices, or vice versa, it incorporates tools and accessories needed to process nearly all common packages.

Neopost
Hayward, CA 94544
Feb 27, 2009 Featuring modular, upgradeable design, Models DS-140 and DS-1000 provide rapid changeover in less than 2 min, speeding transition between jobs with different settings. All system adjustments are PC-driven and fully automated. Interface offers access to production data and reports, including complete real-time status of running jobs. Detailed statistics and data logging facilities allow operator to verify that documents have been correctly processed and obtain audit trail reports.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.
Charlotte, NC 28273
Feb 11, 2009 Providing building-block style modular design, camoLINE System includes electromechanical and pneumatic axes, bolt-together connection technology, and aluminum structural framing. Users can locate holes as needed and select from pneumatic, ball screw, and belt-drive actuators. Customers can also choose among servomotors, side drives with timing belts, or planetary gears to complement design requirements. Applications include material handling, pick-and-place, palletizing, and inspection.

Cincinnati Automation Ltd.
Erlanger, KY 41018
Jan 09, 2009 Designed to assemble, inspect, and pack automotive vibration dampening mounts at rate of 30 ppm, Turnkey System can also be configured for small components and assemblies. During process, grommets are staked on inserts in nests which are attached to timing belt indexing conveyor. Parts are lubricated and pressed together to complete assembly. Finished parts are unloaded and inspected with 2 camera Keyence or Cognex vision system, and good assemblies are counted and dropped into customer totes.

Cincinnati Automation Ltd.
Erlanger, KY 41018
Jan 08, 2009 Featuring dual nests for clamps and insulators, Stabilizer Bar Assembly, Inspection, and Gaging Machine includes 2 assembly presses and 2 camera Keyence vision systems to verify correct insulators presence and orientation prior to assembly. Keyence laser micrometer verifies correct bar OD before continuing assembly, while bar code scanner verifies correct part number label on bars prior to final release. PLC controls all machine functions.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jan 05, 2009 Using PCB handling capability of P300 Pin Insertion Machine, Model C300 integrates force distance monitoring to provide optimal seating process. Traceability feature couples barcode of PCB with force distance curve of each pressed connector and barcode of connector packaging. Suited for automotive connectors with press-fit technology, machine is available with barcode reader on input transfer belt, as well as vision system for board error correction.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
Dec 08, 2008 Featuring fully adjustable rail system, precision screwfeeder can hold 1.0, 1.2, 1.4, 1.7, 2.0, 2.3, 2.6, 3.0, 3.5, 4.0, and 5.0 mm screws. It feeds fasteners with less than 19 mm under head length, and can also accommodate screws with captive washers. Adjustable bit guide in automatic feeder allows use of most standard bits.

Nasco Industries Inc.
Fort Lauderdale, FL 33309
Nov 20, 2008 Using both pistol grip and in-line rivet setting tools, Nascomatic 2001-BR automatically blowfeeds rivet to riveting tool every time rivet is set. Operator hand picks rivet from rivet receiver and inserts it into tool nosepiece. Setting rivet automatically signals feeder bowl to blowfeed next rivet. System can be configured to feed and drive open end, closed end, and structural rivets up to ¼ in. diameter.

Manncorp
Willow Grove, PA 19090
Nov 17, 2008 Suited for SMD assemblers, Advanced Starter is comprised of stencil printer, automatic pick and place system, and Pb-free conveyor reflow oven. It offers out-of-the-box operation for prototyping and other low-volume printed circuit board assembly applications and is available with various feeder options. Along with on-the-fly top vision plus bottom vision, ECM-6711S placer component features 24-lane feeder base, 13.75 x 9.8 in. placement area, computer, and LCD monitor.

FSI International
Chaska, MN 55318
Nov 12, 2008 Suited for 32 and 22 nm technologies, ORION® Single Wafer Cleaning System features closed chamber design for complete control and containment of wafer environment. It addresses issues such as reduction of material loss during photoresist stripping after ultra shallow implants and elimination of material loss and galvanic corrosion in high-k metal gates and copper interconnects with metal containing capping layers. 3D cluster configuration optimizes throughput and flexibility.

BOWE BELL + HOWELL
Wheeling, IL 60090
Nov 10, 2008 Combining functionality of multiple inserters, Combo® Inserting System processes envelopes at speeds to 12,000 cycles/hr for letters and 9,000 cycles/hr for flats. Incorporating self-locking synchronized guide adjustments, inserting station elevator, and uniform hinge-line registration, EASE(TM) system minimizes number of steps required to change over from one job to another. Combo system Control Document Collator provides range of options for control documents and inserts.

Manncorp
Willow Grove, PA 19090
Oct 07, 2008 Martin Expert lead-free rework system v09.6 automatically accomplishes SMT repair, from removal to replacement, as well as resoldering of BGAs, CSPs, µBGAs, and other SMDs. In addition to Hi-Res camera combined with Auto Vision Placement, PC-controlled solution provides IR underheating unit that adjusts to exact board size, software that automatically generates profiles for all solder and desolder processes; as well as nozzles for placement, soldering, and solder removal.

Novatec EAP
Montauban   France
Sep 15, 2008 VacuNest securely fixtures double-sided circuit board assemblies up to 450 x 450 mm for printing, dispensing, and component placement. Shape memory board support system combines advantages of machined dedicated tooling fixtures and programmable pin designs, spreading support forces over board. Anti-static chamber, which contains foam former surrounded by polymer granules, can be profiled to match contours of differently populated board undersides.

Manncorp
Willow Grove, PA 19090
Sep 05, 2008 Suitable for prototyping, short runs, or full production, Economy Turnkey Line features 3 main components. MC384 pick-and-place machine, offering speeds of 4,000 cph, includes 128-lane feeder capacity and ability to mount 0201s, CFPs, and µBGAs in 14.5 x 13.4 in. placement area. Model 5500 Stencil Printer has independent, pressure-controlled dual squeegees and pneumatically controlled stencil frame. With 5 independent zones, CR5000 reflow oven attains lead-free-ideal temperatures to 300ºC.