Tormach LLC    Waunakee, WI 53597
Sep 19, 2011 In addition to 5,100 rpm R8 spindle driven by 1.5 hp induction motor with sensorless vector control logic, PCNC 1100 Series 3 utilizes cast iron frame with hand-scraped hydrodynamic slideways featuring low-friction, PTFE-filled, acetyl-bonded sliding surfaces. Additional features include polyphase stepper motors with Leadshine® microstepping drivers; durable copolymer enamel paint system; redesigned operator panel; and cast iron tool tray.

Roberts PolyPro, Inc.    Charlotte, NC 28273
Sep 16, 2011 PolyPro single-station multipack bottle handle applicator applies high-density polyethylene (HDPE) carrying handles to 4, 6, 12, and 24 unit cases for most common bottle and jug sizes and material compositions. Bottle alignment technology ensures accurate placement of handle, and high capacity magazine allows for 45 minutes of operation without handle-loading intervention. Featuring durable powder-coat finish, machine can be ordered in either automatic or semi-automatic configuration.

Altai Technologies    Shatin   China
Sep 16, 2011 Extending outdoor WiFi coverage to indoor areas for broadband connectivity, 802.11n-capable Altai U1 increases WiFi signal strength as well as throughput in areas covered by A8 series Super WiFi Base Station or A2 series Super WiFi Access Point via signal processing algorithms and built-in antennas. Pocket-sized solution can improve link budget as much as 15 dB and achieves line-of-sight range of up to 4 km. Plug-and-play unit can be powered via laptop USB connection.

Essemtec Ag      Switzerland
Sep 15, 2011 Accommodating 2 dispensing heads simultaneously, Model CDS6200 utilizes micro-dispensing valves that can be modularly adjusted for numerous applications. Valves are suitable for small dosing dot sizes and non-contact dispensing applications such as dosing LED lenses. Designed to dispense small drops from 2 nl, valves can be exchanged, and fluidic part can be separated from drive part for cleaning and maintenance. Machine supports 3D-MID, which allows LEDs to be placed in any angle and direction.

US Products    Coeur D'Alene, ID 83815
Sep 14, 2011 Featuring rotationally molded LLDPE head, Evolution Carpet Wand weighs just 6.5 lb, helping to minimize worker fatigue. Glide receiver and vacuum tube are made of aircraft aluminum and glide is Delrin® acetal. Specially fit to glide holder, glide provides airtight seal and is removable and replaceable. Solution line and fittings, made of stainless steel, withstand pressures up to 3,000 psi.

Walter USA, Inc.    Waukesha, WI 53188
Sep 08, 2011 Non-coolant thru versions of Titex X-treme(TM) solid carbide high-performance drills are available from 1/8-¾ in. dia and can be used with all common materials. Featuring 4-margins design that promotes stability relative to workpiece, drills maintain position at point of entrance or exit as well as when machining inclined surfaces. Additional features include aluminum chromium nitride-based XPL coating, 140° point angle, and cylindrical shank or whistle-notch shank.

Maguire Products, Inc.    Aston, PA 19014
Sep 08, 2011 Sweeper(TM) is equipped with dual control that automatically switches from Sweeper in empty box to second Sweeper in an adjacent full one, eliminating downtime. Unit, which completely empties containers without need for box tilters, can be supplied in particular size that accommodates 64 mm hoses and European-style octobins that hold 1,000 kg of resin. Sized for Gaylord boxes that hold 1,000-1,500 lb, original model comes in 2 versions that accommodate vacuum line hoses with 1.5 and 2.5 in. dia.

FKN Systek, Inc.    Framingham, MA 01702
Sep 07, 2011 Suitable for thin pre-scored printed circuit cards measuring .060 in. thick or less, K3000 Linear Blade PCB Singulators assure score-line of PCB matches up with linear blade of K3000 depanelizer, preventing blade run out. USA-made depanelizers come in 18 and 24 in. blade versions with adjustable front and back table that can be tilted, allowing separated panels to slide onto conveyor line. Adjustable blade guards on each side of circular blade protect operator.

Kalamazoo Industries, Inc.    Kalamazoo, MI 49001
Sep 07, 2011 Designed for deburring, polishing, and other finishing operations, Model KVF3 Vibratory Finisher has 3.3 ft³ capacity steel tub with cast urethane lining. Integrated ¾ hp, single-phase, 110 Vac motor powers vibratory action, while steel construction provides ruggedness and design promotes quiet operation. Measuring 36 x 27 x 36 in., finisher has 500 lb capacity and comes with casters for portability.

Ingersoll Rand Industrial Technologies    Davidson, NC 28036
Sep 06, 2011 Powered by 3 hp turbine motor, 5 in. Vortex VT22 air angle grinder is suited for heavy-duty operations. Spindle offset of .89 in. allows depth cut of up to 1.6 in., while pivoting, vibration-reduced side handle reduces operator fatigue. Other features include spindle lock mechanism, sealed angle head, and optional top handle. Wheel changeovers can be accomplished in seconds via thumb-operated spindle lock, which also controls 10-position safety guard.

Netgear Inc.    Santa Clara, CA 96054
Sep 02, 2011 Equipped with Clear Channel Selector, N600 Premium Edition automatically detects when WiFi channel in use becomes overcrowded and switches to another less-crowded channel. ReadySHARE Cloud transforms USB hard drive or flash drive plugged into USB port of router into private cloud storage system for securely accessing and sharing files within network or across Internet. Built around 680 MHz processor, 16 MB flash memory, and 128 MB RAM, router can be configured via browser-based interface.

Walter Surface Technologies    Windsor, CT 06095
Sep 01, 2011 Able to clean stainless steel at rates from 3-6 fpm without toxic pickling pastes, SURFOX employs conductive application pad that simultaneously cleans and passivates parts. System produces flawless finish on stainless steel and mirror-like finish on chrome. It offers controlled dispersion of cleaning fluid and supports Surfox H and T electrolyte cleaning solutions for standard and heavy-duty jobs. Passivation tester, stainless steel grade ID tester, and marking kits are included.

Dynomax, Inc.    Wheeling, IL 60090
Sep 01, 2011 Designed for robotic grinding of abrasive and forged materials, Dynogrind(TM) series employs Dynoguard(TM) sealing system that promotes extended spindle life. With max range of 18,000 rpm, modular spindles are capable of handling various applications. Model HSE070-812289 weighs 33 lb, is rated at 8.5 hp and 12,000 rpm, and generates 3.8 lb-ft of torque. Each spindle comes with HSK tool change, power management/interconnect, and closed-loop cooling systems.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Aug 31, 2011 Suitable for batch processing of low-profile work pieces, Model GWB-702T features one blast wheel over each half of the 4,000 lb capacity, 70 in. dia turntable. Each blast wheel is directly driven at 3,000 rpm by 10 hp motor and can throw ~220 lb of metallic media per minute in extended blast pattern up to 36 in. long. Blast pattern of individual blast wheels is adjustable, and table, ceiling, and walls are armored with abrasion-resistant cast iron alloy plates.

Meraki Networks, Inc.    Mountain View, CA 94041
Aug 31, 2011 Designed to handle over 100 clients, Model MR66 features 2 concurrent radios, with speeds up to 600 Mbps, while single-radio Model MR62 offers speeds up to 300 Mbps. Both 802.11n cloud-controlled units include stateful policy firewall, application firewall, and rogue AP detection for security. Housed in water- and dust-sealed enclosure, APs provide built-in network access control, Layer 7 Application Traffic Shaping, and self-healing mesh routing for hard-to-wire areas and point-to-point links.

Lockheed Martin    Sunnyvale, CA 94087
Aug 30, 2011 Enabling military vehicles to serve multiple mission roles, Whetstone(TM) Communications-on-the-Move (COTM) kit gives warfighters access to various networks without having to incorporate racks of equipment. Platform-agnostic system, depending on mission, can be integrated from one platform to another in less than 1 hr. Scalable to accommodate mission demands, solution provides SATCOM connectivity and consists of servers, solid state storage, network switch, and router.

Thermadyne Industries, Inc.    St. Louis, MO 63017
Aug 26, 2011 Supplied in environmentally friendly packaging, Journeyman® Select EDGE Outfits come with CA 2460 Cutting Attachment, 315 FC Torch Handle with built-in flashback arrestors and reverse flow check valves, as well as ESS4 EDGE Series regulators. Cutting attachments are available with 75° or 90° head angle, and heavy-duty outfit can cut up to 8 in. and weld up to 3 in. Ruggedized regulator features internal vent system and Shock Limitation and Absorption Mechanism (SLAM) technology.

Eurotech Group    AMARO (Udine) 33020  Italy
Aug 26, 2011 Based on 5915 ESR card from Cisco Systems, DuraMAR 5915 enables contractors and civilian agencies to deploy Cisco Mobile Ready Net capabilities, including data, video, and voice services virtually anywhere LAN or WAN connectivity is required. Rugged system features dual WAN uplinks and is available as standalone 5-port network router or with integrated GigE switch for total of 19 Ethernet ports. Unit supports IPv4 and IPv6 routing protocols, IP multicasting, RAR, DLEP, and Mobile IP routing.

Methods Machine Tools, Inc.    Sudbury, MA 01776
Aug 25, 2011 Utilizing opposed twin-spindle, 2-turret construction, 8-axis Nakamura-Tome WT-150 II occupies 67.8 x 67.8 x 6.2 ft and facilitates operation via 19 in. touchscreen LCD. FANUC 31i-B CNC control and PC-based control (NT-IPS) accelerate processing, while max tool swing of 23 in. on upper and lower turrets lets users drill through 2 in. dia bar from one side. Other features include 31.5 in. distance between spindles, 787 ipm rapid traverse on X-axis, and 314 ipm cutting feeds on X/Z/B axes.

Euro-Tech Corp.    Menomonee Falls, WI 53051
Aug 24, 2011 Suited for staging parts on CMMs or vision inspection systems, Pinhead Flexible Fixturing eliminates need for special constructions to fix complex workpieces. Modular clamping system can be combined and expanded as necessary, and 70 pins ensure optimal fit. Pin base height for mounting workpiece is 4.75 in. to top of pins, and 0.160 in. pin dia and .800 in. stroke allow optimal shape adaptation. Allowable downward force per unit is 10 kg per Pinhead element (22 lb).