D-Link Systems, Inc.    Fountain Valley, CA 92708
Oct 03, 2011 Powered by CloudCommand(TM), D-Link® DAP-2565 provides SMBs as well as educational and hospitality environments with secure way to manage networks. Unit supports Power over Ethernet and provides selectable 2.4/5 GHz dual bands for IEEE 802.11n performance up to 300 Mbps. Housed in plenum-rated metal chassis for above-ceiling airspace installation, access point offers central management capabilities and secure, segregated guess access and control privileges for each user.

Tellabs, Inc.    Naperville, IL 60563
Sep 30, 2011 Designed for mobile and wireline networks, SmartCore® 9200 Series integrates intelligence onto each line card and distributes processing across all line cards using SmartCard architecture. Platform provides visibility for network analytics and traffic management and facilitates troubleshooting, diagnosing, and managing Layers 3-7 to optimized networks. Scaling logically and physically on multiple form factors, router handles 11 Tb in single chassis and 33 Tb in bay.

Inductotherm    Rancocas, NJ 08073
Sep 29, 2011 Distancing foundry workers from furnace and its molten metal, ARMS® (Automated Robotic Melt Shop) System uses robot to perform full scope of hazardous operations. These include checking metal bath grounding, dipping thermocouple lance, slagging furnace, taking metal samples, and adding any required trim materials. From control room, furnace operator activates pre-programmed robot and controls movement of furnace, charge car, and slag cart.

Metabo Corp.    West Chester, PA 19380 4243
Sep 28, 2011 Powered by 1,200 W, 10 A Marathon motor, Model RBE12-180 is suitable for burnishing, finishing, and reconditioning steel, stainless steel, non-ferrous pipe and tube. Tool features double gear reduction, exact sanding belt guidance, and 270° max wrap angle as well as electronic soft start and Vario Tacho Constamatic electronic speed stabilization. For safety, sander includes overload protection, power interruption protection, winding protection grid, and auto-stop carbon brushes.

Rust-Lick, Inc.    Glenview, IL 60025
Sep 28, 2011 Available in 5- or 55-gal containers, Ultracut 380R is effective in wide range of light, moderate, and heavy-duty applications, including machining, cutting, grinding, milling, broaching, threading, and turning. Hard water stable formula contains no DCHA, chlorine, boron, phenol, nitrites, triazines, sulfur, copper, or SARA 313 reportable chemistry. Product is recommended for ferrous/nonferrous metals, aluminum, titanium, brass, bronze, copper, and other high nickel alloys.

R & M Energy Systems    Houston, TX 77060
Sep 28, 2011 Able to operate in temperatures to 650°F and pressures to 5,000 psi, RODEC(TM) High Temperature, High Pressure Tubing Rotator evenly distributes wear about internal circumference of production tubing. System is compatible with any wellhead configuration that complies with API 6A specifications and can rotate any size of production tubing with any API thread configuration. Able to extend tubing life by 6-10 times, rotator features double-sealed design and multiple drive options.

Spartanics    Rolling Meadows, IL 60008
Sep 27, 2011 Unlike other digital cutting/laser cutting lines that may require input of vector-based files during set up, Designers' Turnkey Digital Print-to-Laser Cutting System allows product developers to use Rastor Image Process software at pre-press level to specify not only print but also laser cutting files to finish product. System can extract vector data embedded in PDF, ONYX, or other formats, and enables use of barcodes to signal job changeovers for uninterrupted continuous production lines.

Makita U.S.A., Inc.    La Mirada, CA 90638
Sep 27, 2011 Designed for use with Makita 4 ½-5 in. Grinders, Dust Collecting Cutting Guards are suited for variety of concrete and masonry applications. Model 192618-2, featuring cast aluminum construction and large lip for stable plunging, has direct-connection dust port for use with most commercial vacuum hoses. Featuring steel construction, Model 192972-4 offers tool-less depth adjustment, large shoe for stability, and hose adapter for most commercial vacuum hoses.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Sep 27, 2011 End mills, each with 2 cutting edges, extend depth of cut for CoroMill 316 exchangeable head milling system to 0.8 x Dc. Ballnose option, suited for profile milling, aluminum machining, and finishing, also has cutting edge for profile roughing. Able to accommodate chip evacuation problems when slot milling, corner radius option suits slot/shoulder/plunge/face milling, ramping, and pocketing. Chamfer, available for chamfer milling of different angles, is optimized for spot drilling.

BLM Group USA    Wixom, MI 48393
Sep 27, 2011 Able to cut large diameter, thick walled tubes, LT JUMBO Series can process mild, high strength, alloy, and stainless steels. System can be used to cut round, square, and rectangular tubes as well as non-tubular open structural sections ranging from 3-20 in. dia and lengths to 60 ft. All loading, cutting, and unloading operations are controlled by CNC, and system control software automatically selects optimal cutting method.

Robert Bosch GmbH    Waiblingen D-71332  Germany
Sep 27, 2011 Suitable for packaging soft products and multi-packs, Pack 301 IN gently transports product by carrying it on top of film from former through cutting head, minimizing jams. Modular film backstand can be located in various positions relative to infeed and wrapper, allowing users to optimize film path and packaging appearance. To meet various manufacturer needs, Pack 301 IN can integrate with variety of infeeds such as flighted, lug-less, trough style, and belt feeders.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Sep 26, 2011 To reduce number of nozzles required for uniform coverage and lower compressed air requirements, TR-900 is offered with oscillator to provide reciprocating motion of blast guns. Components are conveyed in/out of blast chamber via rubber or steel mesh belt that may be fitted with guide rails, cleats, or part-holding fixtures. Accommodating single- or multiple-lane media-blast treatment, system supports up to 14 blast guns and offers adjustable (0 to ~20 fpm) conveyor belt speed.

Pat Mooney, Inc.    Addison, IL 60101
Sep 26, 2011 To ensure torsion-free travel through sawing range, Danobat CP520AF is equipped with main prismatic guide column that travels on linear rails and linear bearings, and support guide column that travels on free rollers. Hydraulic gripper vise positions material to proper cut length. With 25 ft, 2 in. x 2 1/8 in. x 0.063 in. band, machine offers cutting capacities of 20½ in. round and 23 5/8 x 20½ in. square. Intelligent Cutting Software stores material speed and feed information in library.

Netgear Inc.    Santa Clara, CA 96054
Sep 23, 2011 Supporting full 450 Mbps in both 2.4 and 5 GHz bands, NETGEAR N900 features 6 internal antennas boosted by radio amplifiers, 2 USB ports, and 4 high-speed Gigabit Ethernet ports. ReadySHARE® Printer feature enables USB printers plugged into router to be accessed by any computer linked to network. For security, router supports WPA and WPA2 protocols for WiFi, has double firewall protection against Internet threats, and provides DoS attack prevention.

AKS Cutting Systems    Cleveland, OH 44135
Sep 23, 2011 Available on accu-kut plasma plate cutting system, tube processing center provides plasma processing of tubes and pipes. When used in conjunction with robo-kut plasma beveling head, system can perform straight or bevel cuts in plate up to 2 in. thick as well as tubes and pipes from 2-6 in. square, rectangular, or round and up to 24 ft long. Featuring unitized, fully welded design, system offers seamless plate and tube changeover.

Dynabrade, Inc.    Clarence, NY 14031
Sep 22, 2011 Operating at 14,000 strokes/min, DynaPen Series features one-touch on/off button and 6 ft air line that swivels 360° for maneuverability, especially useful when working on contoured parts. In-line filter prevents debris from entering tool from air line. Available with 1/8 in. or 3 mm collet insert, DynaPen Series is suited for use on plastics, composites, steel, aluminum, and other materials found in aerospace, mold making, firearm, and machine shop environments.

Romaco Inc.    Lincoln Park, NJ 07035
Sep 22, 2011 Integrating robotic transfer station, heat sealing machine, and intermittent motion cartoner, Siebler HM 1E/240 Line has working height of 90 cm, enabling continuous eye-level monitoring. Four-lane line achieves maximum packaging speed of 1,500 products/min, and uses intelligent separating system to position products accurately in sealing station. When processed horizontally, effervescent products are not exposed to heat and vapors emitted by sealing station, minimizing waste.

KBC Tools & Machinery    Sterling Heights, MI 48314
Sep 21, 2011 Offered in 2- and 3-axis models, heavy-duty KBC incorporates Acu-Rite CNC MILLPWR Control with full-color LCD, 3D contouring capabilities, and standardized menus. Mechanical variable-speed mill head delivers full torque over entire speed range, while table, available in 9 x 49 in. or 10 x 50 in. sizes, features precision hardened ground ways. Also included, quill-release feature on spindle drive allows for manual operation when CNC is unnecessary or unwanted.

Netgear Inc.    Santa Clara, CA 96054
Sep 21, 2011 Housed in steel case, NETGEAR ProSafe® FVS318N combines all-in-one router, wireless-N access point, gigabit switch, and SSL VPN firewall. Secure Sockets Layer VPNs give remote workers secure connections through browser, while IPsec VPNs connect FVS318N to third-party firewalls in other locations. Complete LAN connectivity is achieved via Wireless-N WiFi and 8 wired Gigabit Ethernet ports.

Walter USA, Inc.    Waukesha, WI 53188
Sep 20, 2011 Prototyp ConeFit(TM) solid carbide milling system is available with spade-type compression molded, changeable cutting heads suited for copy and plunge milling, chamfering, centering, and spot-facing holes. For graphite machining, PCD coated N50 variants are available as 4-flute cutters with corner radius and as double-edged, ball-nose end mills. Protoomax(TM)ST end mill provides maximum metal removal during roughing and finishing of steel, including stainless, and four-flute variant is also offered.