Tru-Cut Saw, Inc.    Brunswick, OH 44212
Feb 28, 2012 Offered with variety of blade options to meet specific application requirements, Model TC16DC features 2-speed, 3 hp motor, 45° left and right miter cutting, self-centering vise, laser cutting guide, and chip tray. Dry cut metal saw, suited for sample cutting, industrial applications, and fabrication shops, supports 12, 14, and 16 in. dry cut saw blades with TiN, TiCN, and AlTin coatings.

Rockford Systems, Inc.    Rockford, IL 61109 2695
Feb 27, 2012 Suited for Bridgeport milling machines, chip shields provide barrier between flying chips (swarf), sparks, and coolant, and operators or other employees in surrounding area. Shields can be repositioned to accommodate tool and part changes. Constructed of transparent polycarbonate material, products attach directly to existing head machine bolts and feature flexible neoprene material attached at bottom of each section to contain flying chips and swarf as bed moves up and down.

Essemtec Ag      Switzerland
Feb 27, 2012 Facilitating feeder handling and set up of SMD pick-and-place machines, Cobra Feeder Cart features 2 racks for 45 feeders each and 360° wheels, which allow pushing in any direction. Cart serves as storage for feeders used for next job as well as repository for feeders disassembled from pick-and-place machine. Transporting feeders in cart is safe because door and elevator thresholds will not allow feeders to fall out.

Manncorp    Willow Grove, PA 19090
Feb 24, 2012 Equipped with programmable top and bottom hot air as well as rapid on/off IR underheaters, lead-free BR750 has 8 set points that allow exact thermal conditions to be produced for profiles containing heating rate, target temperature, dwell time, and cooling. SMDs are automatically pre-aligned and picked up from component nest at exact centers after size is entered, and upward-looking camera verifies positioning. Split-vision optics and electronic zoom adjustment performs fine tuning.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Feb 24, 2012 Designed for intermediate hole-tolerance area of IT9-IT10, CoroDrill 870 can be tailored to optimize applications through diameter range, steps, and length possibilities. Secure interface between drill body and tip ensures precision, while quick tip change helps maximize active machining time. Drill is available in 0.472-0.826 in. diameter range and lengths 3x and 5x hole diameter as standard.

Supercritical Fluid Technologies, Inc.    Newark, DE 19711
Feb 23, 2012 Designed to perform extractions in supercritical fluid media, SFT-150 Supercritical Fluid Extractor can be applied to variety of natural substances in order to obtain pure fragrance extracts for perfumes and shampoos. High-resolution variable restrictor valve provides control over flow rates, and air-driven pump produces pressures required for supercritical fluid work. Flow rates up to 250 g/min of liquid CO2 may be selected, and modular design is configurable and adaptable to application needs.

Walter USA, Inc.    Waukesha, WI 53188
Feb 22, 2012 Characterized by parabolic flute profile, Walter Titex UFL® A1549TFP employs helix angle of 40°, optimizing rigidity. In many applications, drilling to depth of 10-12 x D without pecking is possible. Drill's HSS-E 5% cobalt content substrate provides heat resistance, while TiAIN tip coating boosts cutting parameters and tool life, and U form point geometry promotes chip formation. Available in 1-12 mm diameters, drill is suitable for all ISO material groups.

Herrmann Ultrasonics, Inc.    Bartlett, IL 60103
Feb 22, 2012 Featuring modular design, Model MPW offers ultrasonic welding as well as means of die punching filter membrane material into appropriate shape and transporting material to weld region. System utilizes reel-to-reel guide system to index membrane material into position via tension control. Cylinder actuates ultrasonic tooling through die-punch assembly, cutting material to size. As tool passes through punch, vacuum is applied to hold material in place for welding operation.

DEK    Rolling Meadows, IL 60006
Feb 22, 2012 Enabling real-time continuous alignment adjustments and cleaning frequency adaptation, ProDEK optimizes throughput and yield while limiting operator intervention. From paste offset data feeds delivered to printer by SPI system, ProDEK monitors configurable quantity of PCBs, sending corrected forward/reverse offset to printer, which then adjusts paste on pad alignment in real-time. ProDEK also monitors high area warning counts, which may indicate excessive or insufficient understencil cleaning.

Kontron Modular Computers GmbH      Germany
Feb 21, 2012 Based on 600 MHz Intel Atom processor, Model KM2M806XT includes application-ready middleware and supports M2M digital device connectivity. Built-in accelerometer, dual HDMI, and HD audio support enables designers to implement both movement tracking and intensive A/V smart service features. Model KM2M806XT supports 802.11 b/g/n at 2.4 GHz band and 5 GHz band for 802.11a. Rated for temperatures from -40 to +85°C, system includes cast aluminum case with thermal management capabilities.

INDEX Corporation    Noblesville, IN 46060
Feb 21, 2012 With extra B-axis in upper tool carrier that can pivot 100°, TRAUB TNL18-7B Sliding/Fixed Headstock Lathe can machine highly complex parts and complicated contour elements that also require additional operations such as milling or drilling, at any angular position. Tool turret indexing is carried out by NC rotary axis without mechanical lock, permitting free angle positioning of turret. TRAUB TX8i-s control allows alternate programming, optimization, and simulation in interactive or NC mode.

Primary Cutter, LLC/SUPERMILL    Berlin, CT 06037
Feb 17, 2012 Offered in sizes from ¼-1 in. dia, SUPERMILL TOMCAT 5-flute carbide endmills run at high rpm and feed rates for rapid stock removal. Tool geometry enables feed rates of 200 ipm on steels, alloy steels, and stainless steels, allowing users to perform more high speed finishing radial cuts instead of slower roughing cuts, which can help speed production time. Sharp corner, corner radius, regular length, long length, and stub length endmills are available.

Tulsa Power, LLC    Tulsa, OK 74110
Feb 16, 2012 Able to spool or coil, Automatic Cut and Transfer (ACT) System is adaptable for wire and cable applications requiring accumulation, contact dancer, pneumatic cutting, and on-line printing to micro tubing applications requiring non-contact, ultrasonic position control for low running tension. Operability, features, and color touchscreen UI let single operator oversee multiple lines, facilitating control with optimized switchover reliability at high speeds. Upgrade options are available.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Feb 16, 2012 Providing through-tool coolant supply and max spindle speed of 20,000 rpm, Series 112 EWD 2-54 enables precision adjustments on-the-fly. On-board electronic measurement system in tool carrier allows diameter adjustments for boring range of .079-2.126 in., while display relates diameter corrections with resolution of .00005 in./diameter, or .001 mm/diameter on metric heads. Featuring coated tool body with IP69K seal rating, boring head includes power management system and automatic switch-off.

JP Sercel Associates, Inc.    Manchester, NH 03102
Feb 16, 2012 Utilizing Pico-second lasers at wavelengths ranging from 355-1,064 nm, IX-6168 Micromachining System provides precision machining, cutting, and hole drilling with minimized thermal effects. Pico-second laser systems deliver high peak energy intensity, resulting from short pulse duration, enabling lasers to maximize coupling with materials that are typically transparent to lasers with longer pulse widths. Applications can be found in LED, semiconductor, solar, and biomedical industries.

EV Group Inc.    Tempe, AZ 85284
Feb 14, 2012 Equipped with high-intensity UV light source and optional filter fan unit, EVG620HBL Gen II provides wafer throughput up to 165 6-in. wafers/hr. Robotic handling layout with wafer mapping capability supports demand for wafer traceability, while microscope supports automated mask pattern search, minimizing mask setup and change time. With recipe-controlled microscopes, illumination spectrum can be varied to ensure best pattern contrast with various wafer and layer materials.

CS Unitec, Inc.    Norwalk, CT 06850
Feb 13, 2012 In addition to 16 A/1,800 W, 2-speed motor, HIPPO PMH 70F-RL features 2 mixing paddles designed with helix ribbon and side bars. Removable, cleanable liner and rimless bucket system facilitates mixing of multiple batches of construction compounds. Also included, Easy-roll Trolley and balanced Easy-tilt Cradle let one person mix, transport, and place up to 20 gal of material simultaneously. Casters move freely on level floors, and air-filled tires are available for rougher terrain.

Saelig Co., Inc.    Pittsford, NY 14534
Feb 13, 2012 Built with linear ball bearings and precision-ground 8 mm shafts, Replicator(TM) offers 1- or 2-color printing of solid objects and fabricates designs up to 8.9 x 5.7 x 5.9 in. System features 4 x 20 character LCD panel and multi-directional control pad. Using SD Card slot or USB connection, model designs can be loaded and built directly from control pad commands. System builds parts at speeds of 40 mm/s, with positioning precision of 2.5 microns in Z axis and 11 microns in XY axes.

Walter USA, Inc.    Waukesha, WI 53188
Feb 09, 2012 Promoting safety while speeding changeover in grooving, parting, turning applications, models G1511, G1521, and G1551 have respective approach angles of 0° (straight), 90°, and 45° and are optimized for shallow depth grooving to 0.236 in. Straight and 90° versions suit radial/axial face grooving and turning, while G1551 is intended for recesses, undercutting, and copy turning. Formed from Tigerotec® materials, all double-edged inserts offer clamping screw accessible from both sides.

AZCO Corp.    Fairfield, NJ 07004
Feb 08, 2012 Driven by servo motor, Modular Punch Station uses through hardened punch and die tooling for precision cuts. Roll of base material is placed on motorized unwind, and as dancer moves, unwind feeds out material to set of idler rollers. Servo driven nip rollers pull material through punch station, and motorized rewind winds material onto cardboard core. Operating from 110 Vac, station is mounted onto base plate and all functions are controlled via color touchscreen.