Malish Corp., Plastic Div.    Willoughby, OH 44094
Mar 17, 2004 Model SP-17 provides environmentally safe removal of hard surface deposits such as epoxy, fiberglass, glue, grout, ice, packed soil, paints, and build-up on concrete floors. Dual position blade holders are designed in knockdown position with rear slot for aggressive scraping on tough debris. Tool is only for use on standard 175 rpm rotary floor machine with 1½ hp motor.

ITC Mfg. Inc.    Phoenix, AZ 85009
Mar 17, 2004 Hanita square- and ball-nosed end mills, designed for mold and die machining, cut materials such as graphite and steels hardened to 60 Rockwell C at speeds to 150 m/min. Offered in 4 series, Diamond Like Coating or TiAIN coatings are available. Hanita Vision end mills, designed for machining hardened steels up to 67 Rockwell C, operate at speeds to 200 m/min. They give surface finish of 63Ra and come in sizes from 4–25 mm dia with length of cut from 8–45 mm.

FLUSH-CUT INC.    Cazadero, CA 95421
Mar 17, 2004 Suited for automotive bodywork applications, Flush-Cut Adapters for cutting, rasping, and sanding allow users to make cuts in hard-to-reach places. They also permit rasping and sanding from flush surface in tight spots, without bending blades or damaging materials. Tools, able to reach behind trim and framing members, are useful in projects from framing to finishing.

Lyndex-Nikken Inc.    Mundelein, IL 60060
Mar 17, 2004 Offered in various types, 3Lock System incorporates internal expanding pressure capability that maintains correct taper to flange ratio. Counteracting centrifugal force produced from machine spindle, system eliminates vibration and promotes smooth cutting. Product works with machine tools equipped with dual contact spindles and is suited for use in high-speed and extended length applications.

Kennametal Inc., Advanced Materials Div.    Latrobe, PA 15650-0231
Mar 17, 2004 Producing chamfers up to 1.5 mm, Chamfering Ring can be positioned anywhere along body of KSEM drills to control hole depth. It has 2 cartridges, each containing insert with 2 cutting edges. Available with or without chamfering inserts incorporated directly into cutter body, Spotting Tool features 150° angle and comes in 0.500-1.575 in. and 12.5-40 mm diameters. Grade KC7315 has PVD titanium aluminum oxide coating for machining alloy steels.

Heim Data Systems, Inc.    Belmar, NJ 07719
Mar 15, 2004 Compatible with A, D, and GSR Series digital recorders, W Series provides digital-to-digital copying of recorded media such as DLT or AIT Tapes, Hard Disks, and Solid State flash memory. System is also compatible with media recorded in Heim DATaRec and IRIG106 Chapter 10 formats. Models are available with single or dual plug-in cartridge receivers. Data transfer to host computer is done via integrated SCSI interface and FTrans file transfer or media copying application.

Balzers, Inc.    Elgin, IL 60123
Mar 12, 2004 With AlCrN (aluminum chromium nitride) formula, BALINIT® ALCRONA exhibits oxidation- and wear-resistance. It is suited for dry and wet machining of unalloyed steels as well as high-strength and high-hardness (up to 54 HRC) steels. Coating is also suited for use in applications involving heavy mechanical and thermal stresses.

Kennametal Inc., Advanced Materials Div.    Latrobe, PA 15650-0231
Mar 12, 2004 Series KSOM Octagonal Insert Face Mills are ¼ in. thick with ¾ in. inscribed circle. Tool-steel insert pockets are machined in hardened state so they won't deflect. Face mills can be fed at up to 0.030 in. feed per tooth. Screw and finger-clamps keep inserts from moving under extreme cutting forces. Ranging in diameter from 2.5-6 in., units provide 8 cutting edges per insert, 22° rake angle, and 45° lead angle. Four different grades are available.

Sun Coast Industrial    St. Joseph, MI 49085
Mar 12, 2004 Portable Vacuum Sand Blast System provides quick clean up in auto body shops, research and development departments, toolrooms, and manufacturing plants. User presses blast head against work piece and squeezes trigger. Sand blasting and reclaiming of media starts immediately.

Flow International Corp.    Kent, WA 98032 2618
Mar 12, 2004 Model WMC2 is available with FlowMaster PC or Siemens CNC control. Options include multi-head Paser ECL Plus cutting system and dual-head Dynamic Waterjet capability. Machine can be equipped with variety of Intensifier or Hyplex pumps and cutting heads. Other features include streamlined operation and ergonomic design with roll-around cabinet.

Sun Coast Industrial    St. Joseph, MI 49085
Mar 12, 2004 Hand-held Sand Blast System features 4 scfm nozzle/air-jet combo and flat bottom for handling and storing. To operate, user connects 90–110 psi air supply and pulls trigger on cast aluminum gun. System provides continuous 2 minute blast without refilling reservoir.

Hirschmann Engineering USA, Inc.    Schaumburg, IL 60173
Mar 11, 2004 Model H80R.NC integrated A-axis, for horizontal use on wire EDMs, uses Fanuc encoder which measures 1 million pulses per revolution. Encoder is mounted directly to axis spindle to ensure optimal accuracy. Axis housing is made from single block of corrosion-resistant stainless steel and precision ground to axis.

Viking Industries L.L.C.    Lake Forest, IL 60045
Mar 11, 2004 Heavy-duty Model V323 features 3/8 in. drill chuck, rear-exhaust design, and direct-drive, 4-vane motor. Optional kit includes pneumatic oil, flap wheels, 2 different size stones, and several carbide burrs.

CJWinter Machine Technologies    Rochester, NY 14611
Mar 11, 2004 Suited for thread rolling applications on CNC tuning centers and Swiss and Multi-Spindle machines, Model 190 features single-piece front-plate design that provides thread roll protection. Utilizing engraved scale, it features micro-adjustable thread pitch diameter and permits on-the-machine adjustments. Roll-locating mechanism that consists of single carbide bushing for each roll eliminates use of needle bearings. Attachment comes with ¾ in. square shank holder.

Cincinnati Incorporated    Cincinnati, OH 45211 0111
Mar 11, 2004 Autoform+ CNC Forming Center combines press brake platform with PC-based control. Bend simulation graphics provide visual instructions and guidelines, while screen displays show each step and change in part shape produced with full 360° rotation. Fast Part Programming format allows jobs to be programmed, run, and edited from one screen and Autoform+ software provides calculations of ram reversal position and gage allowance values.

Valenite, Inc.    Madison Heights, MI 48071 9636
Mar 10, 2004 ValTURNâ„¢ ProGRIPâ„¢ has spring-loaded clamp design that allows insert to be gripped in 2 directions. Inserts can be changed despite holder position, and interchangeability of clamping components allow same toolholder shank to be used for carbide, ceramic, or CBN insert designs. Product is available in 98 different insert and lead angle shank styles to accommodate cast iron, steel, stainless steel, and heat-treated material applications.

Steril-Aire, Inc.    Burbank, CA 91504
Mar 09, 2004 Unit Ventilator UVC Kit improves classroom air quality by preventing spread of viral and bacterial infections and eliminating mold and associated odors. Kit contains UVC Emitter(TM), power supply, and all hardware components necessary to retrofit unit ventilator with UVC. Installed emitters irradiate UVC energy to eliminate surface contaminants and reduce airborne microbial contaminants. It fits most ventilator brands, including blow-through and draw-through coil styles.

Setco    Cincinnati, OH 45233
Mar 09, 2004 ProMetrix(TM) belt-driven spindles are capable of 12,000, 15,000, 18,000, and 20,000 rpm. Available in block, cluster, and cartridge designs, they offer variety of bearing configurations, hybrid gear types, lubrication methods, spindle noses, belt drive packages, and drawbars. Units feature permanent grease-packed or air-oil lubrication, and can be horizontal, vertical, angular, ceiling, and side-wall mounted. Optional hybrid ceramic bearings provide seizure resistance.

Lock-N-Stitch International    Turlock, CA 95380
Mar 08, 2004 Based on Spiralhookâ„¢ thread geometry, Full-Torqueâ„¢ thread repair system restores strength and new threads simultaneously. Available in most inch and metric sizes, system increases strength of casting when bolt or stud is torqued into insert. It pulls up on insert, increasing load on Spiralhook threads and radial drawing force of threads. System contains crack and prevents future damage while maintaining full clamping load.

Hurco Machine Tool Products    Indianapolis, IN 46268
Mar 08, 2004 Providing surface finishing and roughing operations, Model VTXV features stationary table capable of holding parts over 4,400 lb, and offers X, Y, Z travels of 31.5 x 27.5 x 20 in. Model VTXU, suited for machining multi-sided parts, allows 2-axis motion of trunion table to be separated from 3-axis motion in traveling column. For small batch processing, horizontal Model HTX500 features 500 mm pallets and is capable of 4th axis contouring using NC programming and indexing.