Weidmuller, Inc.    Richmond, VA 23236
May 16, 2013 Approved for real-time automation and information management systems, Gigabit Routers operate from 7–36 Vdc input and come in LAN and wireless 3G/UMTS versions with integrated DIO. Integrated VPN remote maintenance functions allow secure Internet-based access to components and systems on LAN, through wired access via WAN port or wirelessly via UMTS/3G interface. Integrated stateful inspection firewall and additional security functions ensure protection against unauthorized access.

GE Co.    Southfield, MI 48034
May 16, 2013 Used to close oil and gas wells in emergency, SeaONYX BOP Surface Control System incorporates Mark VIe architecture, which provides obsolescence management and enables components to be hot swapped while system is running. System’s Engineering Workstation is based on Proficy Historian software, which collects and archives data at high speeds, sending it to electronic archive. Software also enables future applications that may include advanced monitoring, diagnostics, and predictive analytics.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
May 16, 2013 Incorporating robot nozzle manipulator and 2 auxiliary axes of coordinated robotic motion of its servomotor-driven spindles, RB-RXS-400 suits work cell finishing and surface preparation operations with capability to be loaded/unloaded via robot. Six-axis Fanuc M-10iA robot, mounted on pedestal at rear of 46 x 42 in. blast cabinet, is fitted with protective suit of laminated fabric. EOAT includes blow-off nozzles for post-blast air wash cycle; pressure-blast media delivery is optional.

Walter USA, Inc.    Waukesha, WI 53188
May 16, 2013 Designed for tapping long-chipping high tensile strength steels, Prototyp Paradur® Short Chip HT Tap has 15° helix angle for chip removal, even in deep and protected threads. This reduces to 9° helix angle which, combined with ground rake in chamfer, ensures creation of short chips. Axial internal cooling rinses chips out of hole through spiral flutes. Tool life is optimized by THL hard coating, except on reduced helix in lower section of tool which is ground after coating is applied.

Ohio Tool Works Corp.    Ashland, OH 44805
May 16, 2013 Supporting simultaneous production of 2 barrels, OTW Twin-Spindle 5000 offers turnkey package with twin parallel spindles, quick-change hydraulic fixturing, independent feed systems for adjusting stock removal rates, and automated touchscreen PLC controls. Design and functionality enable suppliers of pump barrels and other high volume extraction-related products to increase productivity while protecting dimensional integrity of thin-wall, small diameter parts.

connectBlue Inc.    Chicago, IL 60601
May 15, 2013 Features such as WLAN dual-band functionality and omnidirectional, 11 cm, external stub antenna with RPSMA connector enable RWE251s to be used in 2.4 and 5 GHz ISM bands and flexible placement. Based on WLAN IEEE 802.11 a/b/g/n (Wi-Fi), IP65-rated and ready-to-use adapter operates from -30 to +65°C and offers user seamless roaming and redundancy. It suits industrial/medical applications where Ethernet cable needs to be replaced with wireless connection.

Irwin Industrial Tool    Huntersville, NC 28078
May 14, 2013 Impact Performance Series™ fastener drive bits, available in Phillips®, square recess, Torx®, and tamper-resistant Torx® bits, are manufactured with cold-forged steel. Designed to drive fastener from side, nutsetters have lobular design that optimizes clearance on corners of fastener. Insert bit holders feature c-ring design with external clip that fits into retaining ring notch of insert bit, while socket adapters are available with ball-lock retention design and have forged body.

MC Machinery Systems    Wood Dale, IL 60191
May 10, 2013 Providing 125.9 x 62.9 x 4.7 in. stroke, Model 3015 NX-F comes standard with fiber laser oscillator, Z-axis linear drive, preset auto-focus processing head, and 64-bit numerical control with 15 in. touchscreen. Rapid traverse rate is 4,724 ipm on single axis machine or 6,680 ipm on simultaneous machines. Additional features include multi-chamber dust collection mechanism and camera for material alignment.

Matrix Packaging Machinery    Saukville, WI 53080
May 10, 2013 Rated at cycle speeds up to 100 bags/min, Triton Automated Bagging Machine supports bag sizes from 2 x 3 in. to 18 x 23 in. Vertical machine features heavy-duty wash-down construction with 4 x 4 in. welded stainless steel frame. System includes Matrix Smart Jaw ST sealing system, automatic web edge guide film tracking, tool-free film roll and forming tube changeover, and Allen-Bradley control components. For modified atmosphere packaging, gas flushing system is available.

OK International    Garden Grove, CA 92841
May 08, 2013 Available for Scorpion Rework System, Side-View Camera Upgrade Kit facilitates visibility of reflow during rework process and helps operator set placement height of vacuum and reflow nozzles. Kit features high magnification optics, CMOS sensor camera with USB 2.0 connection, and picture-in-picture functionality, eliminating need for second monitor. Adjustable double articulated arm provides camera mount, while LED lighting lets operator direct light onto part from different angles.

Creaform    Levis, QC G6V4L2
May 08, 2013 Enabling inspection of up to few hundred parts per day with accuracy of up to 0.085 mm in shop floor conditions, MetraSCAN-R™ series includes 2 versions of optical CMM 3D scanners, 70-R and 210-R, designed for automated and robotized applications. System can be fully configured and programmed to meet inspection automation projects requirements for parts of various sizes and shapes, and optical reflectors allow automatic detection of part alignment.

MARTIN    Manchester, NH 03109
May 06, 2013 EXPERT 10.6 Rework Systems are available with IR temperature measurement sensors. Installed next to camera at Advanced Vision Placement unit, IR sensor module has integrated laser pointer that is used to indicate area of measurement on PCB surface. Sensor mount can be unlocked by users, allowing them to swipe measurement location over PCB with minimal effort. System also includes hybrid under-heater and control unit integrated into single housing.

Kennametal Inc.    Latrobe, PA 15650
May 06, 2013 Beyond KYS40™-grade solid ceramic endmill is capable of roughing at cutting speeds up to 3,300 sfm and machining high-strength nickel-based alloys. Enlarged core design optimizes tool rigidity and minimizes deflection at high cutting speeds. Also, unit features 40° helix angle for maximized shearing and chip evacuation. Product is available in 6-fluted version for face milling and profiling and 4-fluted, necked version for slot milling and pocketing.

Walter Surface Technologies    Windsor, CT 06095
May 02, 2013 Intended for overall removal, Enduro-Flex features ECO-TRIM backing made from base of natural and sustainable plant fibers; 5 in. disc with Grit 40 removes up to 2,500 g over its lifespan. Enduro-Flex Turbo, used for weld removal, edge breaking, and blending applications, has proprietary mixture of high content self-sharpening grains. Built-in Cyclone Technology, along with flap configuration, lets operators perform with cutting rate of grit 36 with finish of grit 60.

Bystronic, Inc.    Elgin, IL 60123
May 02, 2013 In combination with automation system, ByAutonom 3015 can be operated lightly manned. Labor tasks associated with laser setups and manned operations are reduced due to Automatic Lens Cassette Changer, Automatic Nozzle Changer, and Automatic Nozzle Centering. Along with option to incorporate 4,400 or 6,000 W CO₂ laser sources, system offers accelerated operation due to linear motors, rigid machine frame, and lightweight cutting bridge. Optional rotary axis allows tube profile processing.

Stellram    La Vergne, TN 37086
May 02, 2013 While wear- and deformation-resistant NL200 is intended for machining cast iron, wear-resistant NL250 is suited for semi-finishing and finishing applications. Medium and rough machining of steels and cast iron materials with light scale but no interruption can be accomplished with NL300, and NL400 handles medium and rough machining on stainless steel and exotic alloys. Fine grain NL920, with edge security on steels and stainless steels, serves rough and heavy machining applications.

NLB Corporation    Wixom, MI 48393 2824
May 01, 2013 Featuring rugged design, 1005 Series convertible water jet units combine 1,000 hp with 4,000–20,000 psi convertibility. In-line fluid end can be converted with kit to any of 5 operating pressures and flows, up to 333 gpm. Diesel-powered units are built around quintuplex plunger pump that minimizes wear and maintenance. Also featured are forged steel crankshaft mounted in heavy-duty bearings, drive pinion output shafts on both sides of pump, and operating controls mounted on separate manifold.

Addex, Inc.    Stoughton, MA 02072
Apr 30, 2013 For blown film extrusion lines, Tandem External Gauge Control (TEGC) system combines gauge control efficiency of Addex EGC air ring with bubble stabilizing lower air ring to reduce film thickness variations by up to 70% and increase throughput. Ethernet connection is standard, electronic circuit board is located in plenum area, and 90–288 control zones are available depending on air ring size. Among others, OEM options include mapping hardware and software for control processor.

Brooks Instrument    Hatfield, PA 19440
Apr 30, 2013 Insensitive to pressure transients, Model GF135 provides real-time integral rate-of-decay flow measurement. Data can be used to optimize accuracy at critical low-flow set points, set up alarm limits for critical performance parameters, and monitor trends for predictive maintenance. With advanced diagnostic capabilities that verify accuracy, check valve leak-by, and monitor sensor drift, semiconductor manufacturers can maintain uniformity in etch profiles and critical dimensions.

Mini-Circuits    Brooklyn, NY 11235
Apr 30, 2013 With range of 610–810 MHz, SYBD-22-82HP+ 50 Ω, 22 dB coupling, DC pass units feature mainline loss of 0.10 dB typ with VSWR of 1.10:1 typ and deliver directivity at 24 typ. Select models feature power handling capabilities to 150 W at room temperature, and suitable applications include VHF/UHF and SMR. Model SYBD coupler series joins LTCC coupler family with rugged connectorized models. All couplers are ESD compliant and available as RoHS compliant.